非冻结水对微球复合水凝胶机械性能的影响

本文旨在用DSC的方法研究水凝胶结合水的能力与韧性的关系。 分别以甲基丙烯酸丁酯(BMA)或甲基丙烯酸六氟丁酯(HFBMA)和烯丙基胺为单体,制备了2种核壳纳米微球(BMA微球和HFBMA微球)。 再以其作为大分子引发剂和交联剂,制备了微球交联复合水凝胶(BMA-H凝胶和HFBMA-H凝胶)。 通过差示扫描量热仪(DSC)、傅里叶变换红外光谱仪(FTIR)和透射电子显微镜(TEM)等技术手段研究凝胶的结构和性能。 结果表明,HFBMA-H凝胶具有更好的机械性能,其拉伸强度和断裂伸长率分别可达280 kPa和3960%,远高于BMA-H凝胶(101 kPa,2700%)。 通过对2种复合凝胶体系内不同状态的水进行分析,发现HFBMA-H凝胶的非冻结水的质量分数明显高于BMA-H凝胶,这种非冻结水的增塑作用对于凝胶机械强度的提升具有重要影响。     

ʵʱ����ƽ�ⷴ�ݳ�����EAST PCS�еļ���

为提高等离子体实时平衡反演过程的精度和效率,开发了基于图形处理器(GPU)的P-EFIT程序.简要概括EAST PCS软硬件架构后,描述了并行实时平衡反演程序P-EFIT在EAST PCS中的集成工作.为了验证集成系统的正确性与可用性,用历史实验数据作了性能测试,满足实时控制的要求.目前P-EFIT已集成在EAST中并用于等离子体控制,EAST实验证明控制性能良好.     

基于物联网的智能化条纹相机控制系统的研制

为满足条纹相机便携化、智能化的发展需要,研制了一种高适用性的分布式智能控制系统,实现了对条纹相机工作参量的监测,对电极电压、扫描工作模式的精确控制以及对图像的采集与处理.基于物联网技术框架与客户端-服务器的结构模式,实现了有线及无线设备扩展的多机协作功能与移动监控功能.并针对该控制系统,设计了具有自保护功能的自激型反激式可调高压电源模块,基于自激式拓扑的简单结构,实现了电源的小型化,且线性调整准确度可达1%.采用Nd∶YLF脉冲激光器(脉宽8ps,波长526.5nm)对应用该控制系统的可见光皮秒条纹相机进行标定,测试得到动态分辨率为12.75Lp/mm(CTF=14%),动态范围为234∶1,时间分辨率达到14ps.     

微观描述热核裂变寿命（英文）

有关热核裂变的研究与反应堆中的诱发裂变,天体环境中的裂变,以及超重元素的合成等密切相关。热核裂变的研究通常是基于Bohr-Wheeler 的统计裂变理论。而统计模型的研究十分依赖唯像的能级密度和位能面。因此,提出基于微观的有限温度的能量密度泛函理论计算热核的裂变寿命。可以微观自洽地计算出温度相关的裂变位垒高度,曲率,集体质量参数。基于虚自由能法,从低温到高温的裂变寿命可以由一个统一的框架给出。展示了在裂变研究中温度相关裂变位垒的重要性,并讨论了微观描述热核裂变的前景。The studies of thermal fission rates are relevant to novel reactors, astrophysical environments, and survival probabilities of compound superheavy nuclei. This has been conventionally studied by the Bohr-Wheeler statistical model that depends on phenomenological level densities and fission barriers. In this context, we propose to study the thermal fission rates based on microscopic temperature dependent nuclear energy density functional theory. The microscopic temperature dependent fission barrier heights and curvatures, and collective mass parameters can be self-consistently obtained. The fission lifetimes from low to high temperatures can be given by the imaginary free energy method in a consistent framework. Microscopic temperature dependent fission barriers play an essential role in fission studies.     

灰霾背景下基于最优链路的低轨道量子卫星星间切换策略

为了应对灰霾对星地量子通信信道所带来的突发性干扰,根据灰霾天气下量子信号在自由空间中的衰减指数,本文提出了一种基于信号功率衰减最低的最优链路量子卫星切换策略。当目前的星地链路参数满足切换条件时,地面用户通过对不同信道中量子信号功率衰减系数的比对,测试到最小衰减卫星链路,基于对光子态Bell基的测量,完成卫星间的量子纠缠交换,建立新的纠缠信道,保证通信在切换过程中的连续性。仿真结果表明,当系统呼损率为5%,能见度为1km,地面用户数分别为50、100、300,轨道高度为300km和1400km时,量子卫星的切换成功率分别为95%、93.6%、91.8%和92%、90%、87%。由此可见,本策略能够在保证通信可靠性的前提下,实现星地间量子信道的平稳切换,提高量子卫星通信系统在灰霾背景下链路的有效性。     

超磁致伸缩材料的擦除特性和同余特性实验研究

超磁致伸缩材料在力磁耦合作用下具有复杂的迟滞响应。Preisach模型可有效描述物理过程中的滞后现象,它具有两个重要特性,即擦除特性和同余特性。擦除特性是指输入局部极大值擦除了加载过程中小于该值的所有极大值,或输入局部极小值擦除了加载过程中大于该值的所有极小值,同时,与这些历史极值相应的加载历史也被擦除,不再影响之后的输出。同余特性是指输入极大值与极小值相同的所有闭合曲线一致。本文通过实验系统地研究了超磁致伸缩材料在多轴力磁耦合场作用下的磁致伸缩曲线、磁滞回线和应力应变的迟滞行为,发现其在力磁耦合下的非线性滞后行为具有擦除特性和同余特性。这满足了Preisach模型描述滞后现象的两个基本要求,验证了利用Preisach模型描述超磁致伸缩材料迟滞行为的可行性,为超磁致伸缩材料的非线性理论和器件设计提供了依据。     

Compensation-rematch for the major components of C-ADS injector-I

The China-ADS project is a strategic plan launched by the Chinese Academy of Sciences to solve the nuclear waste problem and the resource problem for nuclear power in China. Under its long-term plan, it will last until about 2040. In order to achieve the extremely high reliability and availability required for the C-ADS accelerator, a fault tolerant strategy has been implanted. The failure effects of key elements such as the RF cavities and focusing elements in different locations of the injector-I part have been studied and schemes of compensation based on the local compensation-rematch method have been proposed. In addition, error analysis has been carried out to check the reliability of this method compared with the uncompensated situation, and it is found to be very effective. As the injector-I testing facility is coming into operation, it is possible to check and improve the compensation-rematch method with the beam testing experiment before the main linac operation.     

Transverse profile expansion and homogenization at target for the injector Scheme-Ⅰ test stand of China-ADS

For the injector Scheme-Ⅰ test stand of the China-ADS (Accelerator Driven subcritical System), a beam with the maximum power of 100 kW will be produced and transported to the beam dump. To solve the very high thermal load problem at the dump, two measures are taken to deal with the huge power density at the target. One is to enlarge the contact area between the beam and the target, and this is to be accomplished by expanding the beam profile at the target and using slanted target plates. The other is to produce a more homogenous beam profile at the target to minimize the maximum power density. Here the beam dump line is designed to meet the requirement of beam expansion and homogenization at 3 different energies (3.2 MeV, 5 MeV and 10 MeV), and the step-like field magnets are employed for the beam spot homogenization. Taking into account the fact that the space charge effects are very strong at such low beam energies, the simulations have included space charge effects and errors which show that the beam line can meet the requirements very well. In the meantime, the alternative beam design using standard multipole magnets is also presented.     

厚朴酚近红外光谱的2D-COS解析及其在藿香正气口服液模型中应用

以氘代氯仿为溶剂,以中药化学标准品厚朴酚为载体,采用二维相关光谱(Tow-dimensional correlation spectroscopy, 2D-COS)技术,采集近红外光谱(near infrared spectroscopy, NIR),由氘代氯仿纯溶剂与厚朴酚原始光谱的二维相关同步谱可知,厚朴酚在1 365～1 455, 1 600～1 720, 2 000～2 181和2 275～2 465 nm处有特征吸收,其中1 440 nm为酚基O—H伸缩振动基频的一级倍频谱带,1 679 nm为芳基C—H及与芳基相连的甲基C—H伸缩振动一级倍频谱带,2 117, 2 304, 2 339和2 370 nm为芳基C—H伸缩振动、弯曲振动和变形振动的组合频,2 445 nm为芳基相连的甲基C—H弯曲振动基频二级倍频谱带,这些波段为厚朴酚的特征归属。以藿香正气口服液复杂体系为载体,以厚朴酚光谱解析的特征波段与间隔偏最小二乘(interval partial least squares, iPLS)和组合间隔偏最小二乘(synergy interval partial least squares, SiPLS)筛选的特征波段分别建立偏最小二乘(partial least squares, PLS)定量模型,模型的决定系数R2_cal 和R2_pre均大于0.99,校正均方根误差(root mean of square error of calibration, RMSEC),交叉验证均方根误差(root mean of square error of cross validation, RMSECV)和预测均方根误差(root mean of square error of prediction, RMSEP)均较小。结果表明,2D-COS技术解析厚朴酚所得波段建立的定量模型与iPLS和SiPLS波段筛选的模型均相对稳定,这使定量模型的波段选择更具有解释性。该研究为中药化学成分NIR光谱解析特征波段的归属提供方法参考,同时为NIR建模波段筛选提供借鉴和指导。     

人脑 GABA-MRS 中回顾性运动校正方法研究

运动会影响? -氨基丁酸(GABA)磁共振谱图质量,因此,数据采集后应对是否运动加以辨别并对运动的波谱数据作相应处理．该文报道了 GABA 磁共振活体波谱测量中回顾性运动校正后处理方法．该后处理方法通过残余水峰来判断被试扫描过程中的头部运动,重建时舍弃受运动影响的数据,从而改善最终得到的编辑谱的质量．同时该文将这种运动校正方法集成到 MEGA-PRESS 序列的重建模块中,使得扫描完成后能直接得到运动校正后的编辑谱,并可采用 LCModel 对编辑谱进行定量分析．研究结果表明,这种方法可以有效去除受运动影响的数据,使得最终得到的谱图质量明显改善,从而为医学诊断和研究提供便利．