Investigation of viscoelastic focusing of particles and cells in a zigzag microchannel

Microfluidic particle focusing has been a vital prerequisite step in sample preparation for downstream particle separation, counting, detection, or analysis, and has attracted broad applications in biomedical and chemical areas. Besides all the active and passive focusing methods in Newtonian fluids, particle focusing in viscoelastic fluids has been attracting increasing interest because of its advantages induced by intrinsic fluid property. However, to achieve a well-defined focusing position, there is a need to extend channel lengths when focusing micrometer-sized or sub-microsized particles, which would result in the size increase of the microfluidic devices. This work investigated the sheathless viscoelastic focusing of particles and cells in a zigzag microfluidic channel. Benefit from the zigzag structure of the channel, the channel length and the footprint of the device can be reduced without sacrificing the focusing performance. In this work, the viscoelastic focusing, including the focusing of 10 μm polystyrene particles, 5 μm polystyrene particles, 5 μm magnetic particles, white blood cells (WBCs), red blood cells (RBCs), and cancer cells, were all demonstrated. Moreover, magnetophoretic separation of magnetic and nonmagnetic particles after viscoelastic pre-focusing was shown. This focusing technique has the potential to be used in a range of biomedical applications.     

机动目标逆合成孔径激光雷达方位成像快速算法

针对逆合成孔径激光雷达对机动目标成像时存在方位多普勒时变的问题,提出了一种基于方位时频域keystone变换的机动目标逆合成孔径激光雷达方位成像快速算法.利用多分量线性调频子回波信号的调频斜率与起始频率的比值为常量这一特点,在方位时频域采用keystone变换将多分量线性调频信号同时转换为多分量单频信号,利用快速傅里叶变换实现方位聚焦.采用基于分数阶傅里叶变换和最小熵的线性调频参量估计方法,实现了对调频斜率与起始频率比值的精确、快速估计.结果表明,与现有的基于Radon-Wigner变换的距离-瞬时多普勒成像算法相比,所提出的算法成像效率大大提高,且能够保留更多的目标细节信息,适合于逆合成孔径激光雷达的实时成像.     

气相色谱-电子轰击源质谱法测定茶叶中氟虫腈残留量

建立了茶叶中氟虫腈残留量快速测定的气相色谱-电子轰击源质谱法。茶叶中的氟虫腈用正己烷-丙酮(7:3,V/V)混合液提取,经石墨化碳黑固相萃取小柱净化后,用正己烷-丙酮(9:1,V/V)混合液洗脱,浓缩定容后,用气相色谱-电子轰击源质谱法测定,外标法定量。结果表明,目标物质在0.001~0.040 mg/L范围内的线性关系良好;空白样品在0.002~0.010 mg/L范围三水平加标回收实验的平均回收率在96.6%~114.2%之间,相对标准偏差(n=6)为2.9%~4.4%;方法的定量限为0.001 mg/kg。该方法能满足茶叶中氟虫腈残留量0.002 mg/kg的检测要求。     

混合基质水处理膜:材料、制备与性能

以反渗透、纳滤为代表的膜技术已广泛应用于海水和苦咸水脱盐等水处理过程。通过将纳米颗粒添加到传统复合膜基质中,可以制备具有高分离性能和耐污染性的新型膜材料。混合基质膜结合了无机材料及有机聚合物各自的优点,是新型水处理膜材料的发展方向。本文综述了添加无机纳米颗粒的混合基质反渗透、纳滤及正渗透膜的研究进展,详细讨论了不同类型纳米材料的性质和功能,分析了表面有机改性对改善纳米材料分散性以及与聚合物基质相容性的作用,探讨了纳米材料添加方式和膜制备方法对膜结构和性能的影响。在此基础上,进一步探究了混合基质膜的成膜及分离机理,归纳了目前研究中存在的主要问题,并对未来水处理膜材料的研发方向提出了建议。     

UV-Vis Spectrum and the Third-order Nonlinear Optical Properties of the Chiral Camphorderived β-diketonate Platinum Complexes

UV-Vis spectrum and the third-order nonlinear optical properties of the chiral camphor-derived β-diketonate have been studied at the B3LYP/6-31G* level. The results showed that the introduction of electron-drawing group-CF3 and-C3F7 on β-diketonate made the strongest absorption peak red-shift and the lowest energy absorption blue-shied. Introduction of-OC2H5 on the benzene or pyridine ring made the lowest energy absorption blue-shift. When the-C2H3 was introduced on the benzene or pyridine ring, the lowest energy absorption was red-shifted. Introduction of electron-donating group on β-diketonate can enlarge their nonlinear optical properties. On the contrary, the introduction of electron-drawing group dropped it down.     

Au/TiO2 nanotube catalysts prepared by combining sol–gel method with hydrothermal treatment and their catalytic properties for CO oxidation

A new preparation method for Au/TiO₂ nanotubes (NTs) by combing sol–gel with hydrothermal treatment technique was developed. The TiO₂ NTs calcined at 300 °C were nearly uniform, and the gold particles were distributed homogeneously. The possible formation mechanism was suggested. The 5 % Au/TiO₂ NTs calcined at 300 °C had the best catalytic activity for CO oxidation, and their conversion of CO remained at 100 % during 60 h on stream. This preparation method could improve the thermal stability of Au/TiO₂ nanotube catalysts.     

Surface Design for Immobilization of an Antimicrobial Peptide Mimic for Efficient Anti-Biofouling

Microbial surface attachment negatively impacts a wide range of devices from water purification membranes to biomedical implants. Mimics of antimicrobial peptides (AMPs) constituted from poly(N-substituted glycine) „peptoids“ are of great interest as they resist proteolysis and can inhibit a wide spectrum of microbes. We investigate how terminal modification of a peptoid AMP-mimic and its surface immobilization affect antimicrobial activity. We also demonstrate a convenient surface modification strategy for enabling alkyne–azide „click“ coupling on amino-functionalized surfaces. Our results verified that the N- and C-terminal peptoid structures are not required for antimicrobial activity. Moreover, our peptoid immobilization density and choice of PEG tether resulted in a „volumetric“ spatial separation between AMPs that, compared to past studies, enabled the highest AMP surface activity relative to bacterial attachment. Our analysis suggests the importance of spatial flexibility for membrane activity and that AMP separation may be a controlling parameter for optimizing surface anti-biofouling.     

Sorbents for the Direct Capture of CO2 from Ambient Air

The urgency to address global climate change induced by greenhouse gas emissions is increasing. In particular, the rise in atmospheric CO₂ levels is generating alarm. Technologies to remove CO₂ from ambient air, or “direct air capture” (DAC), have recently demonstrated that they can contribute to “negative carbon emission.” Recent advances in surface chemistry and material synthesis have resulted in new generations of CO₂ sorbents, which may drive the future of DAC and its large‐scale deployment. This Review describes major types of sorbents designed to capture CO₂ from ambient air and they are categorized by the sorption mechanism: physisorption, chemisorption, and moisture‐swing sorption.     

Ultrafast,Low‐Cost,and Mass Production of High‐Quality Graphene

Fast, mass, and low‐cost production of high‐quality graphene, which is alluring, remains a great challenge, even though some approaches have shown potential for mass synthesis of graphene. Very recently a great breakthrough was made by Tour and co‐workers (Nature 2020, 577, 647–651): in just a second, easily exfoliated and highly crystalline graphene was produced from abundant carbon‐containing species by cost‐effective flash Joule heating with a low energy input of 7.2 kJ per gram graphene. Such an ultrafast, economic, and scalable process for high‐quality graphene production can be considered as a milestone in the graphene field and is highlighted in this article.