三乙胺与2-氯-5-甲氧基对苯醌光电子转移反应的CIDNP研究

用化学诱导动态核极化（CIDNP）方法研究了三乙胺与2-氯-5-甲氧基对苯醌在 C6D6，CH3CN溶剂中的反应机理，实验结果表明反应过程中首先形成基态电荷转移 络合物（CTC），在CD3CN中，光照电荷分离形成离子自由基对，使三乙胺亚甲基产 生发射极化信号。同时用UV-vis实验证实CTC的存在。     

Swelling kinetics and release characteristic of crosslinked chitosan: Polyether polymer network (semi-IPN) hydrogels

The aqueous swelling kinetics of a series of crosslinked chitosan (cr-CS) with glutaraldehyde (GA) interpenetrating polyether hydrogels have been studied as functions of pH, the N-deacetylation degree of chitosan, the amount of crosslinking agent, the electrolyte composition in solution, temperature, and gel composition. Based on these results, the swelling mechanism of the hydrogels was discussed. The release profiles of chlorhexidini acetas from the semi-IPN were also investigated. © 1994 John Wiley & Sons, Inc.     

氯氧化镁在水中的溶解行为

用ｐＨ法和氯电位法测定氯氧化镁不同温度下在水中的溶解过程。一定间隔时间分析液样中的Ｍｇ＾２＋、Ｃｌ＾－、ＯＨ＾－的浓度，用物化方法鉴定固相。得出不同温度下的相转化、溶解的Ｃ￣ｔ曲线及动力学方程。计算了它们的Ｋｓｐ和热力学函数。     

Morphological and Structural Studies of sPS/aPS Blends

Inrecentyears,thenewsedricrystallinepolymersyndiotacticp0lystyrene(sPS)hasat-ITactedmuchattentionduetoitsg0odchendcalresistanceandenhancedmechanicalperformanceatelevatedtemPeratUre.'H0wever,itexhibitshighbrittlenessandpoorimPact-resistanceandtCar-resistance.2Therefore,itisnecessarytomodifyitwithtougheningpolyIners.AsimPlemeth0dto0verc0methedriscibilityofatwo-phaseblendofsPSandatougheningpolymristotwrovetheinterfacialaffmity,wheretheadditionofablockcoP0lymerisconsideredtobemosteffective.3…     

Parallel solution combustion synthesis for combinatorial materials studies

A parallel solution combustion synthesis technique was developed for combinatorial materials studies. The vigorous combustion reactions were successfully limited in the microreactors by using a substrate-net-mask microreactor system and the lowest adoptable furnace temperature. Using this technique, a luminescent materials library of Y3Al5O12/Tb(chi) was synthesized with the aid of an ink-jet delivery system. Structure and luminescence characterizations were implemented using X-ray diffraction and UV/X-ray spectroscopies, respectively. The results show that this technique is reliable and applicable to combinatorial study of powder materials with high synthesis temperature.     

Synthesis and properties of alkylated imidazoles

Alkylation of 4(5)-nitroimidazole-5(4)-sulfonamide with benzyl bromide occurred on both ring nitrogens. The structures of the products could be assigned by comparison of the chemical shifts of the sulfonamide hydrogens in the nmr spectra with those of the isomeric methyl derivatives, which were prepared by differing routes. Uv and nmr spectral data are reported for a number of bromo-, nitro-, mercapto-, sulfamyl- and amino- substituted imidazoles as well as for both of the isomeric methylated derivatives of the series.     

环己烷中苯甲酰苯胺的双重荧光--分子内电荷转移的直接光谱证据

自从O Connell等［1］报道苯甲酰苯胺(BA)在EPA玻璃体中异常的长波长荧光发射特性以来, 已有众多学者尝试解释该"异常"荧光的发射态性质［2～12］. Kasha等［2～7］认为长波长荧光是质子转移(PT)和电荷转移(CT)两种激发态发射的叠加, 而Azumaya等［8］则认为发射态只包含分子内扭转电荷转移(TICT)态. 应该指出的是, 在上述研究中, 电荷转移态的指认并无有力的实验事实, 而主要是依据与具有CT双重荧光的对二甲氨基苯甲氰［13,14］的类比. 显然, 有关苯甲酰苯胺的长波长荧光发射态的准确性质仍待实验阐明     

Synthesis and electrochemical properties of spinel LiMn2O4 prepared by the rheological phase method

Pure-phase and well-crystallized spinel LiMn₂O₄ powders were successfully synthesized by a simple rheological phase method. The thermal behavior and structure properties of the powders prepared by the rheological phase method compared with the solid-state reaction were investigated by thermogravimetry, powder X-ray diffraction , scanning electron microscopy and transmission electron microscopy. According to the results of the electrochemical tests, it is obvious that the sample resulting from the rheological phase method shows higher discharge capacity and better cycling stability than one formed in the solid-state reaction. The cyclic voltammogram and columbic efficiency curves also confirm that the product by the rheological phase method has a good cycling performance due to its fine cubic spinel structure and morphology.     

Study of a molecular imprinting polymer coated BAW bio-mimic sensor and its application to the determination of caffeine in human serum and urine

A bio-mimic bulk acoustic wave (BAW) sensor was fabricated by coating the caffeine (CAF) template molecular imprinting polymer (MIP). This sensor exhibited high selectivity and a sensitive mass response to CAF. The response range of the sensor was between 5.0 x 10(-9) and 1.0 x 10(-4) M with a detection limit of 5.0 x 10(-9) M at pH 8.0. Recoveries were 96.1-105.6%. Influencing factors were investigated in detail and optimized. When employed to detect real samples, the proposed method proved to be a convenient method with the advantages of high sensitivity, good selectivity and ease of handling.     

Fabrication and performance of a three-dimensionally adjustable device for the amperometric detection of microchip capillary electrophoresis

A microchip CE-amperometric detection (AD) system has been fabricated by integrating a two-dimensionally adjustable CE microchip and an AD cell containing a one-dimensionally adjustable disk detection electrode in a Plexiglas holder. It facilitates the precise 3-D alignment between the channel outlet and the detection electrode without a complicated 3-D manipulator. The performance of this unique system was demonstrated by separating five aromatic amines (1,4-phenyldiamine, aniline, 2-methylaniline, 4-chloroaniline, and 1-naphthylamine) of environmental concern. Factors influencing their separation and detection processes were examined and optimized. The five analytes have been well separated within 140 s in a 74 cm long separation channel at a separation voltage of +2500 V using a 10 mM phosphate buffer (pH 3.5). Highly linear response is obtained for the five analytes over the range 20-200 microM with the detection limits ranging from 0.46 to 1.44 microM, respectively. The present system demonstrated long-term stability and reproducibility with RSDs of less than 5% for the peak current (n = 9). The new approach for the microchannel-electrode alignment should find a wide range of applications in CE, flowing injection analysis, and other microfluidic analysis systems.