仿生支撑液膜法制备硫化锌自组装纳米球链

采用了一种全新的化学仿生方法——载体支撑液膜法制备ZnS纳米球链. 常温常压条件下, 利用含邻菲罗啉载体的支撑液膜(SLM)反应体系选择性传输Zn^2＋至膜另一侧, 在SLM模板作用下, 控制结晶位点, 定向结合阴离子, 加上局部过饱和及界面成核的影响, 成功制备出由8～30 nm纳米粒子自组装的直径范围为250～300 nm ZnS球链. 由XRD和TEM的结果显示, 其结构为立方闪锌矿, 晶格常数为α＝0.5390 nm. 本文还对其荧光性质及产物形成机理进行了初步探讨.     

聚乳酸/β-磷酸三钙多孔复合支架的制备及性能研究

以聚乳酸和β-磷酸三钙共混制备了多孔复合支架,并对其孔隙率、降解性和力学性能进行了研究。结果表明,β-磷酸三钙的引入可以有效地减缓支架的降解,提高支架的力学性能。     

膨胀型类磷酸酯蜜胺盐阻燃剂的合成及应用研究

以双季戊四醇(DPE)、五氧化二磷、水和三聚氰胺为原料,合成了膨胀型环状类磷酸酯蜜胺盐阻燃剂。通过实验提出了合成该阻燃剂的最佳反应条件为：双季戊四醇(DPE)、五氧化二磷、水和三聚氰胺反应物料摩尔配比为1／2．5／2.0／3．45、反应时间4h和反应温度120℃。红外吸收图谱分析表明该阻燃剂具有环状结构,在热重分析和差热分析中该阻燃剂显示出优异的热稳定性和很高的成碳性。以该阻燃剂掺入聚丙烯中,阻燃效果显著,经测试阻燃聚丙烯的极限氧指数(LOI)为33．6,烟密度等级(SDR)为44．25,通过了UL94V-0级。     

水杨酸钴非等温热分解动力学研究

用热分析(TG/DTG)、X射线衍射(XRD)技术研究了固态物质水杨酸钴在空气中热分解的过程。热分析结果表明,水杨酸钴在空气中分两步分解,其失重率与理论计算失重率相吻合;XRD结果表明,水杨酸钴分解的终产物为Co3O4。用Friedman法和Flynn-Wall-Ozawa(FWO)法求取了分解过程的活化能E,并用多元线性回归和多元非线性回归法给出了可能的机理函数,由这些方法得到的动力学数据相互比较吻合。     

Synthesis and Crystal Structure of 1,4,7,10-Tetrakis （2-（（4-hydroxy）phenoxy）ethyl）-1,4,7,10- tetraazacyclododecane

A novel molecule tetra-N-alkylation of cyclen （1,4,7,10-tetraazacyclododecane）, 1,4,7,10-tetrakis（2-（（4-hydroxy）phenoxy）ethyl）-1,4,7,10-tetraazacyclododecane 2, was synthesized and structurally characterized by single-crystal X-ray diffraction. The molecule turned into chiral helical compound crystals grown from EtOH by slow diffusion at room temperature and three of the four hydroquinone groups of the benzene ring formed a g-electron-rich cavity by C-H…π stacking interaction. The crystal belongs to the monoclinic system, space group P21/C with a = 13.9192（9）, b = 13.2871（6）, c = 22.1894（15）A^°, β = 91.4600（10）°, V = 4102.5（4）A^°3, Z = 4, Dc = 1.219 g/cm^3, C40H52N4O8, Mr = 752.89, F（000） = 1616,μ = 0.088 mm^-1, MoKa radiation （λ = 0.71073）, R = 0.0578 and wR = 0.1389 for 5588 observed reflections with I 〉 2σ（I）. Moreover, compound 2 was characterized with ^1H NMR, ^13C NMR, IR spectra and MS.     

取代1-氯蒽醌中分子内卤键的电子密度拓扑分析

运用量子化学密度泛函B3LYP方法,在6-311＋＋G（d,p）基组水平上对邻位和间位取代1-氯葸醌的分子内卤键进行了研究．用电子定域函数和“分子中的原子,,理论对分子内卤键的性质进行了电子密度拓扑分析．通过对计算得到的密度矩阵进行σ-π兀分离,得到了π-键的键径和分子图,并讨论了。电荷密度和兀电荷密度对卤键的影响．结果表明,键鞍点和环鞍点处的电子密度拓扑性质均可作为衡量分子内卤键强度的量度．键鞍点和环鞍点处的电荷密度P越大,键鞍点与环鞍点的距离越大,卤键强度越大．除σ电荷密度外,π电荷密度对分子内卤键的性质也有明显影响．     

Syntheses,Structures and Properties of Lanthanide Coordination Polymers Constructed from Mixed Acid

Two new coordination polymers,[Ln(oba)(ox)0.5(H2O)2]n(Ln = Ho(1),Eu(2);H2oba = 4,4?-oxybis(benzoic acid),H2ox = oxalic acid) have been synthesized under hydrothermal conditions.According to single-crystal X-ray diffraction analyses,complex 1 crystallizes in the monoclinic system,space group P21/c with a = 13.783(2),b =10.0120(15),c = 12.1974(18) ,β = 105.217(2)°,V = 1624.2(4) 3,C15H12O9Ho,Mr = 501.18,Z = 4,Dc = 2.050 g/cm3,F(000) = 964,μ = 4.919 mm-1,λ(MoKα) = 0.71073 ?,GOOF = 1.124,the final R = 0.0239 and wR = 0.0570 for 3310 independent reflections with Rint = 0.0298.Complexes 2 and 1 are isostructural.Oba and ox ligands bridge the Ln(III) ions into 2D layers with(4,4) topology,which are further interlinked into a 3D supramolecular network by hydrogen bonds.TG curves of the two complexes are studied to examine their thermal stabilities.Additionally,complex 2 shows red fluorescence in the solid state at room temperature.     

甲醇制烯烃催化剂失活模型

在固定床反应器中,研究了甲醇制烯烃反应中当SAPO-34分子筛处于失活期时催化剂活性的变化情况,主要考察催化剂活性随反应温度、空速和运行时间的变化,通过对实验数据的分析拟合,得到了催化剂活性与失活时间、反应温度、空速的经验关联式(失活模型),对失活模型的检验表明,该模型与实验数据较为吻合,表明了该式的准确性。 通过对失活模型的分析,获得了当失活速率达到最大时的失活时间与反应时间、空速的关联式,失活过程应服从不均匀表面失活机理,并且当催化剂处于失活区时,失活时间对活性的影响要大于空速和温度。     

N,N'-亚甲基双丙烯酸酰胺在~(60)Co-γ射线下的辐照效应

报道了 N ,N -亚甲基双丙烯酸酰胺 ( N ,N -MBAA)在 60 Co-γ射线下辐照效应 .对不同辐照条件下的双键含量变化进行了测定 .同时讨论了固态 N,N -MBAA和 N,N -MBAA水溶液经辐照后的结构的变化 .实验结果表明 ,固态 N,N -MBAA在较高温度下辐照易聚合 ,因此辐射敏化反应 PVA纤维应在常温下进行辐照 .     

In situ scanning FTIR microscopy and IR imaging of Pt electrode surface towards CO adsorption

In situ scanning FTIR microscopy was built up for the first time in the present work, which consists of an FTIR apparatus, an IR microscope, an X-Y mapping stage, and the specially designed electrochemical IR cell and computer software. It has been demonstrated that this new space-resolvd in situ IR technique can be used to study vibration properties of micro-area, and to perform IR imaging of electrode surface. The chemical image obtained using this technique fur CO adsorption on Pt electrode illustrated, at a space-resolution of 10~(-2) cm, the inhomogeneity and the distribution of reactivity of micro-area of electrode surface.