Lepton-portal dark matter in hidden valley model and the DAMPE recent results

We study the recent e±cosmic ray excess reported by DAMPE in a Hidden Valley Model with lepton-portal dark matter. We find the electron-portal can account for the excess well and satisfy the DM relic density and direct detection bounds, while electron+muon/electron+muon+tau-portal suffers from strong constraints from lepton flavor violating observables, such as μ→3 e. We also discuss possible collider signatures of our model, both at the LHC and a future 100 Te V hadron collider.     

Electron paramagnetic resonance studies on manganite Pr0.5Sr0.5Mn1−x Ga x O3 (x=0 and 0.05)

In this paper, we present the investigations of electron paramagnetic resonance on perovskite manganite Pr_0.5Sr_0.5MnO₃ and Ga-doped Pr_0.5Sr_0.5Mn_0.95Ga_0.05O₃. The temperature dependent paramagnetic resonance spectra parameters (effective g-factor, peak-to-peak linewidth ΔH _pp and double integrated intensities) have been used to study the paramagnetic spin correlations and spin dynamics. The gradual increase of effective g-factor is attributed to the presence of orbital ordering above T _C. The model fittings of temperature dependent double integrated intensities reveal Arrhenius law is appropriate for describing Pr_0.5Sr_0.5Mn_0.95Ga_0.05O₃ instead of Pr_0.5Sr_0.5MnO₃ system. As for Pr_0.5Sr_0.5MnO₃, the broadening of linewidth with the temperature increase origins from the contribution of small polaron hopping in the PM regime. However, as for Pr_0.5Sr_0.5Mn_0.95Ga_0.05O₃, the broadening of EPR linewidth can be understood with the spin-lattice relaxation mechanism.     

Numerical Simulation of Mixing Characteristics and Energy Consumption in Vane Extruders with Different Structure Parameters

Numerical simulation was performed with the Computational Fluid Dynamics (CFD) analysis software POLYFLOW (ANSYS, Inc., USA) to investigate the melt transportation energy consumption and mixing characteristics of vane extruders. By modifying related parameters in the numerical simulation models, the effects of vane arrangement and eccentricity between rotor and stator were studied. The results showed that for different vane arrangements, the vane unit with four vanes distributed uniformly had the lowest energy consumption per unit melt transported in one cycle and the best mixing characteristics. With the increase of eccentricity, the average rotational power transmitted by the vanes to the melt increased, and the rate of increase increased. The same tendency occurred for the maximum shear rate and stretching rate experienced by the particles in the vane extruder. This suggested that the mixing performance of the vane unit increased significantly with the increase of eccentricity.     

Observation of ZnO nanoparticles outside pores of nano Zn4O(C8H4O4)3 metal-organic framework

It was recognized that ZnO can be formed during synthesizing nano Zn₄O(C₈H₄O₄)₃ metal-organic framework (nano MOF-5). Furthermore, it is generally accepted that the ZnO is dispersed inside the pores of MOF-5. However, herein, the measurements of X-ray powder diffraction (XRD) and transmission electron microscopy (TEM) showed that the crystal particle sizes of ZnO in MOF-5 are in the range of 5-18 nm, which are larger than the pore size of MOF-5 (1.3 nm). This clearly demonstrates that those ZnO nanoparticles are located outside the pores of MOF-5.     

空间高层大气遥感远紫外成像光谱仪的光学系统

空间高层大气遥感远紫外成像光谱仪主要用于观测高层大气中的远紫外辐射和实现对其内部中尺度现象成像的功能。目前我国该类的相关仪器研究基础还比较薄弱,针对这种情况,在光学系统设计的角度上给出了一种适用于130～180nm波段探测的光学系统方案。该成像光谱仪光学系统以离轴抛物镜为物镜,串联Wadsworth结构为成像光谱系统;这种串联Wadsworth成像光谱系统采用离轴抛物镜做准直镜,分光器件为平面光栅和球面光栅串联,实现二次色散,同时球面光栅起到聚焦成像作用;在像差理论的基础上,对该结构的光程函数和各像差进行了分析,获得了改进结构的宽波段完善成像条件。针对低轨空间探测应用要求设计了相关改进型Wadsworth结构成像光谱仪光学系统,设计结果证明系统像差得到了充分校正,在奈奎斯特频率(20lp/mm)下全视场全波段调制传递函数值在0.6以上。该优化结构同时具备高空间分辨率和高光谱分辨率,性能优越。     

温度测量综述——现代计量科学专题之十

1温度与热 温度是国际单位制中七个基本量之一,是人类接触最早,与人类生存关系最为密切,而又难于理解和不易测准的物理量.在科学地定义温度之前,人们把温度的变化与物体所含的热量混为一谈.直到近两个世纪,随着工业和科学技术的发展,逐渐建立起热力学和统计学理论,温度的本质才逐渐被揭示.     

A Novel Single Fluorophore-Labeled Double-Stranded Oligonucleotide Probe for Fluorescence-Enhanced Nucleic Acid Detection Based on the Inherent Quenching Ability of Deoxyguanosine Bases and Competitive Strand-Displacement Reaction

We develop a novel single fluorophore-labeled double-stranded oligonucleotide (OND) probe for rapid, nanostructure-free, fluorescence-enhanced nucleic acid detection for the first time. We further demonstrate such probe is able to well discriminate single-base mutation in nucleic acid. The design takes advantage of an inherent quenching ability of guanine bases. The short strand of the probe is designed with an end-labeled fluorophore that is placed adjacent to two guanines as the quencher located on the long opposite strand, resulting in great quenching of dye fluorescence. In the presence of a target complementary to the long strand of the probe, a competitive strand-displacement reaction occurs and the long strand forms a more stable duplex with the target, resulting in the two strands of the probe being separated from each other. As a consequence of this displacement, the fluorophore and the quencher are no longer in close proximity and dye fluorescence increases, signaling the presence of target.     

Phase-locking observed among high-order lateral modes of a broad-stripe diode array inside an external cavity

For a laser diode array (LDA) positioned in an external cavity of a certain length, a very strong inter-emitter coupling can be established between the off-axis lateral modes of the broad-stripe emitters. Under these circumstances, the phase-locked operation of the LDA due to couplings between off-axis modes of emitters has been observed, for the first time to our knowledge. The observations suggest that phase locking of a broad-stripe LDA can be achieved among different emitter lateral modes by selecting different cavity lengths.     

Time-dependent and outflow boundary conditions for Dissipative Particle Dynamics

We propose a simple method to impose both no-slip boundary conditions at fluid-wall interfaces and at outflow boundaries in fully developed regions for Dissipative Particle Dynamics (DPD) fluid systems. The procedure to enforce the no-slip condition is based on a velocity-dependent shear force, which is a generalized force to represent the presence of the solid-wall particles and to maintain locally thermodynamic consistency. We show that this method can be implemented in both steady and time-dependent fluid systems and compare the DPD results with the continuum limit (Navier-Stokes) results. We also develop a force-adaptive method to impose the outflow boundary conditions for fully developed flow with unspecified outflow velocity profile or pressure value. We study flows over the backward-facing step and in idealized arterial bifurcations using a combination of the two new boundary methods with different flow rates. Finally, we explore the applicability of the outflow method in time-dependent flow systems. The outflow boundary method works well for systems with Womersley number of O(1), i.e., when the pressure and flowrate at the outflow are approximately in-phase.