Preparation, characterization and photocatalytic activity of polycrystalline Bi2O3/SrTiO3 composite powders

Bi₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidation of methanol. These powders were characterized by UV-Visible diffuse reflectance spectra, SEM and X-ray diffraction (XRD). The results revealed that all the Bi₂O₃/SrTiO₃ composite powders exhibited higher photocatalytic activity than pure SrTiO₃, Bi₂O₃ and TiO₂ (P25) under visible light irradiation (λ>440 nm). The effects of the Bi₂O₃ contents on the photocatalytic activities of the composite powders were examined, the photocatalytic activities increased with the content of Bi₂O₃ increasing to a maximum of 83% and then decreased under visible light irradiation. The effects of the calcination temperatures on the photocatalytic activities of the composite powders were also investigated.     

纯Cr2O3包覆Li4Ti5O12微球的制备及其储锂性能研究

The pure Cr₂O₃ coated Li₄Ti₅O₁₂ microspheres were prepared by a facile and cheap solutionbased method with basic chromium(III) nitrate solution (pH=11.9). And their Li-storage properties were investigated as anode materials for lithium rechargeable batteries. The pure Cr₂O₃ works as an adhesive interface to strengthen the connections between Li₄Ti₅O₁₂ particles, providing more electric conduction channels, and reduce the inter-particle resistance. Moreover, LixCr₂O₃, formed by the lithiation of Cr₂O₃, can further stabilize Li₇Ti₅O₁₂ with high electric conductivity on the surface of particles. While in the acid chromium solution (pH=3.2) modification, besides Cr₂O₃, Li₂CrO₄ and TiO₂ phases were also found in the final product. Li₂CrO₄ is toxic and the presence of TiO₂ is not welcome to improve the electrochemical performance of Li₄Ti₅O₁₂ microspheres. The reversible capacity of 1% Cr₂O₃-coated sample with the basic chromium solution modification was 180 mAh/g at 0.1 C, and 134 mAh/g at 10 C. Moreover, it was even as high as 127 mAh/g at 5 C after 600 cycles. At-20℃, its reversible specific capacity was still as high as 118 mAh/g.     

基于VxWorks新型映像的三模冗余启动机制研究

针对VxWorks启动映像依赖于ROM地址,不能适应航天型号中三模存储要求的缺点,利用VxWorks自带的压缩算法,按照航天型号软件任务要求设计了一种基于VxWorks内存型映像的新型压缩映像,实现了软件映像与ROM区地址无关。并且实现了新型压缩映像的三模冗余引导启动,启动时每一个bit数据都从三份映像获取,并进行三取二判断,将最后结果拷贝到内存作为目的映像的bit数据,目的映像启动后能够回写正确数据自动纠正空间环境下可能发生的单粒子翻转错误,为软件的可靠启动建立了基础。     

紫外光电材料ZnO的反应溅射制备及研究

采用直流反应溅射法分别在Si(111),Si(001),及K4玻璃衬底上制备ZnO薄膜,研究了氧氩比、衬底温度以及退火处理对于晶体结晶质量的影响,发现生长过程中的退火处理提高了薄膜质量和晶面取向.通过优化生长条件,在衬底温度为350℃,氧氩比为1:2的条件下生长出了XRD半高宽为01°、C轴取向高度一致的ZnO薄膜.     

塑料脱模剂一组分的光谱分析

柱层析色谱分离性能优良的新型塑料脱模剂，纯化后得一主要未知组分。用元素分析、红外光谱、核磁共振氢谱研究其结构特征，对其盐酸酸化前后红外光谱吸收峰及核磁带进行了归属分析并确定结构。结果表明，该组分为一表面活性剂N，N-二羟乙基十二烷基胺。这为新型脱模剂的产品开发提供了依据。     

磁绝缘传输线电压的初步测量

针对快脉冲直线变压器驱动源装置上的真空磁绝缘传输线（MITL)电压测量的需求,开展了微分型电容分压器和电感分压器的设计、标定和实验。通过不同的电压值、负载阻抗的装置实验中探头输出结果的分析和比较,讨论了测量方法的可行性和适用范围。实验结果表明：微分型电容分压器能够应用于完全磁绝缘状态下的MITL电压测量,但容易受阴极电子发射的影响导致探头输出波形发生畸变。电感分压器受分布电容和电感的影响导致输出信号存在寄生振荡,采用波形重建的方法初步获得了合理的测量结果。     

对流扩散方程的格点模型

推广流体力学的格点法解一般的数学物理方程,建立了一维对流扩散方程的简单和复杂的格点模型,并利用此模型模拟了几种不同初边值条件下的对流扩散方程     

Multiferroic tunnel junctions

Magnetic tunnel junctions with ferroelectric barriers, often referred to as multiferroic tunnel junctions, have been proposed recently to display new functionalities and new device concepts. One of the notable predictions is that the combination of two charge polarizing states and the parallel and antiparallel magnetic states could make it a four resistance state device. We have recently studied the ferroelectric tunneling using a scanning probe technique and multiferroic tunnel junctions using ferromagnetic La_0.7Ca_0.3MnO₃ and La_0.7Sr_0.3MnO₃ as the electrodes and ferroelectric (Ba, Sr)TiO₃ as the barrier in trilayer planner junctions. We show that very thin (Ba, Sr)TiO₃ films can sustain ferroelectricity up till room temperature. The multiferroic tunnel junctions show four resistance states as predicted and can operate at room temperatures.     

摄影测量图像处理的高精度误差补偿法

在高精度的摄影测量中,图像处理精度对整体测量精度起着至关重要的作用,但成像过程中摄像机对特征点图像的离散化采样,会造成图像与原始信号的失真,从而带来图像处理环节的误差。通过对图像处理过程中特征点总能量、能量分布弥散半径和图像处理窗口的特性分析,并以特征点中心位置、提取误差大小和能量密度函数的标准差之间关系为基础,提出一种针对离散化采样的误差补偿法。该方法仅需标定一次补偿参数,适用于所有摄像机和算法,可显著提升原有图像处理精度。实验证明,对于质心法和高斯拟合法,该补偿法可将图像提取精度提高到0.03pixel。