Kinetic investigation of the textile bleaching process

Volumetric H₂-uptake measurements on an Mo₂N (79 m²g^–1) sample reduced at 673 K have been carried out and the uptake isotherms in the temperature range of 308–623 K have been determined. Both the total and reversible hydrogen uptake increased with the uptake temperature. The irreversible hydrogen uptake increased abruptly when the uptake temperature was raised up to 423 K. The maximum of irreversible hydrogen uptake was measured at 473 K. The H_IR/Mo ratio calculated from the uptakes obtained in the temperature range of 308–623 K varies in the range of 0.0010–0.0202. One possible mechanism for hydrogen adsorption is proposed to be heterolytic dissociation on Mo-N paris, in which the molybdenum atoms are in unsaturated coordination.     

介质对配合物稳定性的影响——Ⅳ. Cu(SCN)+-NaNO3-tert-Butyl Alcohol-H2O体系，25℃

本文用分光光度法确定了25℃下配阳离子Cu(SCN)⁺在NaNO₃-叔丁醇-水介质中的稳定常数。混合溶剂中叔丁醇组成为0，5，10，15，20和25 wt%，离子强度范围为0.2～3.0 mole·dm^-3，溶液的pH=1.5～1.6。基于Pitzer理论用最小二乘多项式逼近法，确定了混合溶剂中配合物热力学稳定常数。讨论了配位反应的一级介质效应。     

模式识别—人工神经网络在化学中的若干新应用

本文通过我们应用模式识别－人工神经网络方法预报新化合物、熔盐相图以及复杂化学反应体系的研究，展示应用模式识别－人工神经网络方法与物理化学理论相结合，研究化学现象的可能性和应用价值。     

稀土对耐候钢夹杂物的变质和耐蚀性能的影响

通过金相光学显微镜、扫描电镜及能谱仪,金相定量图象分析仪、非水电解分离夹杂 ICP方法分析固溶稀土含量、电化学腐蚀性能等分析测试手段研究了稀土在耐候钢中存在的形式、非金属夹杂物的形态、尺寸、分布及对耐蚀性能的影响.     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3  106, 1  106 and 0.5  106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

活性酚醛树脂中羟甲基含量的测定

本文提出一种酚醛树脂中羟甲基含量的化学分析法，分别以＾１３ＣＮＭＲ和化学分析法测定酚醛树脂的羟甲基含量。将两种测试结果与已知的投料量进行比较，证明所建立的化学分析法可行。     

面向化妆品产业升级的江南大学应用化学专业建设思考与实践

Based on the development prospect of cosmetics industry, the advantage of light industry characteristic and the foundation of applied chemistry in Jiangnan University, a systematic upgrading of applied chemistry was carried out through "emerging engineering education (3E)" project "upgrade and practice of chemistry-related majors of local and/or trade university responding to the social developments" supported by the Ministry of Education. On the basis of investigation and analysis, the orientation and training goal of applied chemistry were updated first, and then the curriculum system was determined and the curriculum construction is strengthened, so as to achieve more distinctive characteristics, more solid foundation and more comprehensive quality. In view of the new requirements of the 3E for talent training, some practices have been formed in the aspects of multi-disciplinary integration, multi-angle coordination and close integration to industry. Contributing the development of cosmetics industry and seizing the commanding point of science and technology from the perspective of talent training, will play a unique role in human social progress.     

Sensitive Determination of DNA by Resonance Light Scattering with Pentamethoxyl Red

A novel sensitive method for the determination of nucleic acid (DNA) using the resonance light scattering (RLS) spectra of pentamethoxyl red has been developed. It is based on the effects on the resonance light scattering of Pentamethoxyl Red. The effective factors and the optimum conditions were studied, and the enhanced intensity of RLS is in proportion to the concentration of nucleic acids in the range of 0–2.54 µg mL⁻¹ for ct-DNA, 0–4.54 µg mL⁻¹ for hs-DNA. The limits of detection are 1.1 and 2.1 ng mL⁻¹, respectively. Most foreign substances do not interfere in the determination, and the method has good selectivity and high sensitivity. It has been applied to the determination of DNA in synthetic samples and in real samples with satisfactory results.     

依文思蓝褪色分光光度法测定雷洛昔芬

在pH 1 .4～ 2 .5的NaAc HCl缓冲介质中 ,雷洛昔芬 (raloxifene)与依文思蓝 (evansblue)反应形成离子缔合物 ,使依文思蓝溶液褪色 ,最大褪色波长位于 61 0nm。雷洛昔芬在 0～ 1 .4× 1 0 - 5mol/L的浓度范围内遵守比尔定律 ,表观摩尔吸光系数ε6 1 0 为 1 .76× 1 0 4L·mol- 1 ·cm- 1 。方法具有较高的灵敏度和良好的选择性     

Synthesis, structural characterization and ferrimagnetic property of MnPS3 intercalated with nickel(II) cyclopolyamine complex cations

Two new intercalation compounds were prepared by the reactions of Ni(II) cyclopolyamine complex cations with a preintercalate Mn_1−xPS₃K_2x(H₂O)_y, respectively, through “ion exchange” process. Their structures were characterized by elemental analysis, X-ray powder diffraction and infrared spectroscopy. The lattice spacing increased 0.567 and 1.093 nm with respect to the pristine MnPS₃. Ferrimagnetism of the intercalates was confirmed by SQUID experiment with T_c at 40 and 33 K, respectively.