分级结构氮掺杂碳纳米笼担载的铂基高效甲醇氧化电催化剂

高性能低成本的担载型铂基催化剂是直接甲醇燃料电池(DMFC)实用化过程中的一大挑战.利用高比表面积、高稳定性、容易负载金属的载体实现 Pt颗粒的高度分散,既可提高催化剂的催化性能,又可提高 Pt的利用率以降低成本,是担载型 Pt基催化剂实用化的有效途径.碳材料是一种常用的催化剂载体,近年来我们课题组发展了一种高性能的碳纳米笼材料,并可通过异原子掺杂调变其表面性能,提高其活性和负载能力.我们采用原位氧化镁模板法制备氮掺杂碳纳米笼：以具有多级结构的碱式碳酸镁作为氧化镁模板的前体,吡啶为碳源和氮源,经高温热解沉积,在原位形成的氧化镁模板表面形成氮掺杂的石墨化碳纳米薄层;经稀盐酸浸泡并洗涤,获得高纯度的氮掺杂碳纳米笼.氮掺杂碳纳米笼具有分等级的微纳米结构、高导电性、高比表面积和可调变的孔结构,结合表面氮原子的锚钉作用,氮掺杂碳纳米笼有望成为电化学催化剂 Pt的优良载体.
　　在前期研究基础上,本文探索多级结构氮掺杂碳纳米笼(hNCNC)作为新型载体负载 Pt的能力,并评价所构建的负载型催化剂 Pt/hNCNC的电催化性能.通过简便的微波辅助多元醇还原法,将氯铂酸还原成 Pt纳米粒子负载于 hNCNC的表面.为了揭示氮掺杂的效应,我们对比研究了具有相似分级结构但无掺杂的碳纳米笼(hCNC)以及商业化活性炭(Val-can XC-72)作为载体的情况.经热重(TG)和 X射线光电子能谱(XPS)分析,三种催化剂 Pt/hNCNC、Pt/hCNC和 Pt/XC-72的负载量均接近理论负载量(23.1 wt%),都主要以金属态存在.然而,扫描电子显微镜(SEM)和透射电子显微镜(TEM)结果表明, Pt/hNCNC的 Pt分散状态优于 Pt/hCNC,更远优于 Pt/XC-72. Pt/hNCNC的平均 Pt粒径最小,仅约3.3 nm.这种良好的分散状态主要得益于氮原子掺杂,高负电性的氮原子改变了局域的表面极性,有利于 Pt颗粒的成核,也有利于固定 Pt颗粒.
　　由于 hNCNC对 Pt的优异分散能力, Pt/hNCNC表现出高的电化学活性面积.氢吸附和一氧化碳溶出伏安曲线表明, Pt/hNCNC的电化学活性面积高于 Pt/hCNC和 Pt/XC-72,这与显微观察和 X射线衍射(XRD)结果相吻合. Pt/hNCNC展现出优异的甲醇电催化氧化活性和高稳定性,其催化电流明显高于 Pt/hCNC和 Pt/XC-72,电流衰减亦慢于 Pt/hCNC和 Pt/XC-72. hNCNC的分级微纳米结构有利于孔内传质和电子输运,从而提高反应速度. hNCNC的氮掺杂有利于 Pt在载体表面的分散,增强了载体-金属相互作用,提高了电化学活性面积和催化活性.为了进一步考察 hNCNC对 Pt的负载能力,本文还考察了高负载量 Pt/hNCNC的性能.在负载量高达60 wt%时, Pt/hNCNC中的 Pt颗粒仍无明显聚集,其甲醇氧化电流增加了30%,可以有效提高 DMFC的输出电流密度.
　　综上可见, hNCNC可以有效分散并稳定 Pt颗粒,从而提高电化学活性面积和甲醇电催化氧化活性,优于未掺杂的碳纳米笼和传统碳材料,展示了 hNCNC高分散 Pt颗粒用作 DMFC的高效阳极催化剂的重要前景,也表明 hNCNC有望成为应用广泛的新型载体.     

Corrosion inhibition and performance evaluation on 2,5‐diaryl‐1,3,4‐thiadiazole and its derivatives

Using electrochemical impedance spectroscopy (EIS) and scanning electronic microscopy (SEM), this paper evaluated the inhibition effect of four 2,5‐diaryl‐1,3,4‐thiadiazole and its derivatives named 2,5‐diphenly‐1,3,4‐thiadiazole (DPTD), 2,5‐di(2‐hydroxyphenly)‐1,3,4‐thiadiazole (2‐DHPTD), 2,5‐di(3‐hydroxyphenly)‐1,3,4‐thiadiazole (3‐DHPTD), and 2,5‐di(4‐hydroxyphenly)‐1,3,4‐thiadiazole (4‐DHPTD) on silver strip corrosion in 50 mg/l sulfur–ethanol solution under room temperature. The experiments indicated that the inhibition efficiency increased with increasing inhibitor concentrations, and the increasing order was (4‐DHPDT) > (3‐DHPDT) > (2‐DHPDT) > (DPDT). Quantum chemical calculation was applied to correlate inhibition performances with their electronic structural parameters of thiadiazole derivatives. Molecular dynamics simulations (DFT) were used to optimize the equilibrium configurations of the inhibitor molecules on the silver surface and to investigate the molecular structure effect on the corrosion inhibition efficiency. The efficiency order of the investigated inhibitors, which was obtained by experimental results, was verified by theoretical calculations. Contact angle (CA) analysis was also carried out, and finally confirmed the existence of the adsorbed film which prevailed in addition of thiadiazole derivatives. CA analysis indicated that the film of n‐DHPTD (n = 2,3,4) was hydrophilic, owing to two hydroxyl groups in their molecular. The adsorption of these compounds onto silver strip from 50 mg/l S‐ethanol system obeys Langmuir adsorption isotherm, and it belongs to mixed‐type adsorption mainly dominated by chemisorption. Copyright © 2016 John Wiley & Sons, Ltd.     

水热法制备Cu-HMS催化剂及其催化草酸二甲酯加氢性能的研究

以十六胺为模板剂,采用水热合成法制备了一系列不同铜负载量的Cu-HMS催化剂,并考察了其对草酸二甲酯加氢制乙二醇反应的催化性能.同时,通过X射线粉末衍射(XRD)、N_2低温吸附脱附、红外光谱(FI-IR)、H_2程序升温还原(H_2-TPR)及透射电镜(TEM)等手段对催化剂进行了系统表征.结果表明,铜负载量对催化剂活性组分的分散性和载体之间的相互作用力影响很大.实验结果表明,以20%铜负载量制备的Cu-HMS催化剂催化性能优势明显.在反应温度为205℃、压力为2.0 MPa、氢酯比为80 mol/mol及液时空速为0.4 h-1的条件下,草酸二甲酯的转化率接近100%,乙二醇的选择性高达98.11%.     

晶种导向下干胶法合成ZSM-5分子筛

以廉价水玻璃为硅源,在晶种替代有机模板剂的条件下采用干胶法合成了ZSM-5分子筛。利用XRD、SEM、TEM、FTIR、N_2吸附-脱附和NH_3-TPD等分析方法对合成样品进行了表征和测试,考察了合成条件对ZSM-5分子筛晶化过程的影响。结果表明,在硅铝比(n/n)为30~70,钠硅比(n/n)为0.12~0.20时都可以得到结晶度良好的ZSM-5分子筛。研究发现,干胶法合成ZSM-5,在不引入外加水的情况下也可以得到ZSM-5样品,外加水的引入能够有效地提高晶化速率;与水热法合成ZSM-5分子筛相比,干胶法可以显著地缩短晶化时间,同时,合成样品的晶体尺寸也有所减小。     

Enhanced electrochemical performance of SnS nanoparticles/CNTs composite as anode material for sodium-ion battery

SnS/CNTs composite as anode for SIBs exhibits high reversible capacity, good cyclability as well as rate performance, which is superior to that of pure SnS. The enhanced electrochemical performance can be attributed to the adding of CNTs as a flexible and conductive structure supporter and the formation of SnS nanoparticles with small diameter.     

A Novel Method for the Detection of Chlorpyrifos by Combining Quantum Dot-labeled Molecularly Imprinted Polymer with Flow Cytometry

Uniform-sized fluorescent molecularly imprinted polymers were prepared by one-step swelling and suspension polymerization, while chlorpyrifos, methacrylic acid, ethylene glycol dimethacrylate, and oil-soluble CdSe/ZnS quantum dots were used as the carrier, template molecule, functional monomer, cross-linker, and fluorophor, respectively. The morphology, adsorption dynamics, binding ability, and selectivity of quantum dot-labeled molecularly imprinted polymers were evaluated. The dosage of quantum dots for labeling the molecularly imprinted polymers was optimized. The results showed that the optimized dose of quantum dots was 200?µL using a concentration of 8.0?µM. The microsphere size was approximately 10?µm with a honeycombed surface. The quantum dot-labeled molecularly imprinted polymers had an even brightness and a high selectivity. In the presence of different concentrations of chlorpyrifos, a decrease in the fluorescence intensity of the quantum dot-labeled molecularly imprinted polymer was clearly identified by flow cytometry. The whole detection process was accomplished within 2?h including pretreatment. This method was used for the determination of chlorpyrifos in tap water samples.     

酒石酸水溶液中绿色合成5-芳基亚甲基-1,3-二噁烷-4,6-二酮衍生物

在酒石酸水溶液中,以芳香醛和1,3-二噁烷-4,6-二酮为原料,合成了14种5-芳基亚甲基-1,3-二噁烷-4,6-二酮衍生物,收率81%～95%,其中4f, 4g, 5f和5g为新化合物,其结构经¹H NMR, ¹³C NMR和MS(ESI)表征。并对反应条件进行了优化,对反应机理进行了探讨。     

高效液相色谱法测定化妆品中4种禁用醛酮化合物

建立了同时测定化妆品中4种禁用醛酮化合物(巴豆醛、苯乙酮、2,4-二羟基-3-甲基苯甲醛和2-亚戊基环己酮)的高效液相色谱(HPLC)分析方法。样品使用50%乙腈(体积比)溶液提取,经AQ-C18(4.6 mm×150 mm,5μm)色谱柱分离后,高效液相色谱/二极管阵列检测器检测,以保留时间和紫外吸收光谱定性,外标法定量,高效液相色谱-质谱/质谱法确证。结果表明,4种醛酮化合物在0.05~2.0 mg/L质量浓度范围内呈良好的线性关系,相关系数均不小于0.999 9;方法检出限和定量下限分别为0.5~1.0 mg/kg和1.5~3.0 mg/kg。样品加标回收率为89.0%~106.7%,相对标准偏差(RSDs,n=6)为2.0%~6.9%。该方法准确可靠,适用于化妆品中4种禁用醛酮化合物的测定。     

废旧橡胶改性沥青的老化研究现状

废旧橡胶改性沥青可显著延长路面寿命。本文综述了国内外废旧橡胶改性沥青的热氧老化、紫外老化和水老化行为,使用宏观性能和微观结构变化分析了橡胶改性沥青老化特点。橡胶改性沥青在热、氧、紫外、水的作用下发生老化,软化点升高,针入度降低,羰基含量增加。特别是光、氧老化对经过水老化后的橡胶改性沥青老化作用尤为明显,水溶解了部分老化产物促进了沥青的老化。目前对于橡胶改性沥青老化过程中胶粉、沥青的结构性能变化和其环境耦合因素对橡胶改性沥青的老化研究及分析手段还很少,在今后的研究中须引起重视。     

在线中空纤维膜液相微萃取/高效液相色谱法测定3种痕量芳香胺

建立了一种在线中空纤维膜液相微萃取/高效液相色谱联用技术测定3种痕量芳香胺(邻甲苯胺、3,3'-二甲基联苯胺、2-萘胺)的新方法,以顺序注射仪将中空纤维膜液相微萃取装置和高效液相色谱仪连接搭建在线检测装置,利用此装置优化了萃取溶剂、供体相、接收相、盐效应、搅拌速度、萃取时间等前处理条件。结果表明,以正辛醇为萃取溶剂,0.1 mol·L-1Na OH与300 mg·L-1的Na Cl溶液为供体相,0.1 mol·L-1HCl溶液为接收相,搅拌速度为400 r·min-1,萃取40 min后,3种芳香胺的富集倍数可达48~96倍。该方法对3种痕量芳香胺的线性范围为0.01~0.25 mg·L-1,相关系数(r)不小于0.998 4,检出限为0.3~2.2μg·L-1,相对标准偏差(RSD,n=10)为3.1%~4.0%,用于印染废水中3种芳香胺的分析,回收率为98.0%~102.0%。该方法操作简单,有机溶剂用量少,富集率较高,可用于痕量芳香胺类物质的快速分析。