江汉平原上空QTEC变化特征的统计分析

提出了一种观测台网用多接收机性能一致性的标定方法，并利用江汉平原GPS接收台网的观测数据，分析了该地区上空QTEC的日变化、季节变化、年变化和逐年变化的统计特征．标定结果表明，不同接收机之间的仪器偏差是从双频GPS卫星信标推算QTEC的主要误差来源之一，必须校正．统计分析证实，江汉平原上空QTEC的日变化特征同时受电离层和等离子层控制，其年变化以半年周期为主，峰值和谷值分别出现在两分点和两至点附近，QTEC值的逐年变化从太阳活动峰年到低年逐年下降，与以太阳黑子数为代表的太阳活动密切相关．     

MODIS通道1和通道2大气订正的一种快速实用方法

提出了利用气象资料对MODIS影像进行大气校正的一种快速实用方法.读取MODIS前两个通道250min的反射率,采用常用的黑色目标扣除法(Dark-object subtraction)计算天空程辐射,通过卫星过境时刻的气象能见度和水汽资料计算大气透过率,最后推导出目标物的反射率.通过比较两个邻近日期MODIS影像校正前后的归一化植被指数(NDVI)值,得出利用本文提出的方法对MODIS进行大气校正所得到的NDVI值更接近实际情况.结果表明:利用气象能见度和水汽压可以对MODIS数据进行快速有效的大气校正.     

Compact, reliable asymmetric optical configuration for cost-effective fabrication of multiplex dot matrix hologram in anti-counterfeiting applications

This study presents a compact optical configuration that can generate a multiplex dot-matrix hologram with complex interlaced images for anti-counterfeiting applications on valuable paper. Varying the orientation of the interference plane can enable the multiplex hologram to be recorded without changing the interference angle of two laser beams. With its simple asymmetric optical setup, a multiplex hologram with many interlaced images can be efficiently fabricated, increasing the cost of imitation. Experimental details of the asymmetric optical setup are also described.     

Multi-objectives fuzzy models for designing 3D trajectory in horizontal wells

In this paper, multi-objective models for designing 3D trajectory of horizontal wells are developed in a fuzzy environment. Here, the objectives of minimizing the length of the trajectory and the error of entry target point are fuzzy in nature. Some parameters, such as initial value, end value, lower bound and upper bound of the curvature radius, tool-face angle and the are length of each curve section, are also assumed to be vague and imprecise. The impreciseness in the above objectives have been expressed by fuzzy linear membership functions and that in the above parameters by triangular fuzzy numbers. Models have been solved by the fuzzy non-linear programming method based on Zimmermann [1] and Lee and Li [2]. Models are applied to practical design of the horizontal wells. Numerical results illustrate the accuracy and efficiency of the fuzzy models.     

The Synthesis of Glycoglycerolipids

A convenient synthetic route was developed for the synthesis of the novel glycolipids: 1,2-di-O-acyl-3-O-(2‘-acylamide-2‘-denxy-ct-D-glucopyranosyl)-sn-glycerols. 10 new compounds of glycolipids with different acyl groups were obtained.     

用数值方法分析微孔激光器出射光的近场特性

微孔激光器作为应用于近场光信息存储系统中的一种新型光源，它的出射光斑的近场特性对于近场光存储是十分重要的。针对纳米孔径运用角谱进行Fox-Li数值迭代，得到不同孔径微孔激光器的基模光强分布，然后运用二维非线性时域有限差分法分析微孔激光器出射端即微孔金属膜的近场光学性质，模拟计算了不同孔径和厚度的微孔金属膜的光强近场分布，从应用于近场光存储的角度，给出反映其近场光学特性的相关数据。发现由于TM模式下金属存在局域表面等离子增强效应，使得其出射强度比TE模式高一个数量级，从而更适于作为实际中近场光存储系统和原理试验的光学头。     

甚高频等离子体增强化学气相沉积法沉积μc-Si∶H薄膜中氧污染的初步研究

对不同的本底真空条件下,采用甚高频等离子体增强化学气相沉积技术沉积的氢化微晶硅（μc_Si∶H）薄膜中的氧污染问题进行了比较研究.对不同氧污染条件下制备的薄膜样品的x射线光电子能谱与傅里叶变换红外吸收光谱测量结果表明：μc_Si∶H薄膜中,氧以Si—O，O—O和O—H三种不同的键合模式存在,不同的键合模式源自不同的物理机理.μc_Si∶H薄膜的Raman光谱、电导率与激活能的测量结果进一步显示：沉积过程中氧污染程度的不同,对μc_Si∶H薄膜的结构特性与电学特性产生显著影响；而不同氧污染对μc_Si∶H薄膜电学特性的影响不同于氢化非晶硅（a_Si:H）薄膜. 关键词： 氢化微晶硅薄膜 甚高频等离子体增强化学气相沉积 氧污染     

一种控制掺铒光纤激光器超混沌的方法——非线性延时反馈参数调制法

提出一种非线性延时反馈参数调制法来控制混沌/超混沌，给出了利用这种方法控制处于超混沌状态的双环掺铒光纤激光器的方案.数值模拟表明，只要延时时间和反馈强度合适就可以把双环掺铒光纤激光器从超混沌状态成功地控制到不同的周期状态. 关键词： 掺铒光纤激光器 超混沌 非线性延时反馈参数调制 混沌控制     

Reactivities of tetraalkyltin complexes toward Pt/HY zeolite

Tetraalkyltin complexes, SnR₄ (R = Me, Et, Pr, Bu) could react with Pt/HY at 193, 243, 273 and 333 K, respectively. The reactions occurred on the surface of the zeolite and the organotin grafted zeolites were characterized in detail. The framework and the microporous structure of the grafted Pt/HY zeolites were retained. However, the modified zeolites showed better size selectivity in the absorption of hydrocarbons.     

Fourier regularization for a backward heat equation

In this paper a simple and convenient new regularization method for solving backward heat equation—Fourier regularization method is given. Meanwhile, some quite sharp error estimates between the approximate solution and exact solution are provided. A numerical example also shows that the method works effectively.