双波长分光光度法同时测定岩石矿物中的微量金和钯

本文提出以硫代米蚩酮为显色剂，用双波长分光光度法同时测定岩石矿物中的微量金和钯的方法，消除了测定金钯的相互干扰，该方法简便，快速，选择性好，用于矿石样品中金和钯的测定，结果满意。     

多孔硅的电化学制备

单晶硅在氢氟酸溶液中阳极氧化可制得多孔硅, 多孔硅是一种以新形态存在的硅, 与单晶硅相比, 它表现出独特的物理性质和化学活性。荧光光谱峰的蓝移表明, 在p-型低掺杂衬底硅上形成的多孔硅中存在量子尺寸效应, 新近获得的Raman光谱也证实了这一点。     

Fabrication of hexaphenylsilole nanowires and their morphology-tunable photoluminescence.

Immersion of nanoporous alumina membranes into saturated solutions of hexaphenylsilole with subsequent solvent evaporation affords aligned organic nanowires. The luminescent properties of the hexaphenylsilole nanowires can be manipulated by varying their morphologies, which were controlled by changing the channel sizes of the alumina templates.     

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.     

吸附溶出催化伏安法测定痕量锗

利用吸附溶出伏安法、极谱催化法测定痕量锗已有报道。但将吸附溶出伏安法与极谱催化法结合进行测定,尚未见报道。我们选择适当的体系和配位体3,4-二羟基苯甲醛(DHB)及氧化剂钒(V),首先使Ge(Ⅳ)-DHB络合物在悬汞电极上于一定电位处吸附富集一定时间,然后电位向负的方向扫描。当达到Ge(Ⅳ)-DHB络合物的还原电位时,Ge(Ⅳ)还原     

亲和标记-基质辅助激光解吸电离飞行时间质谱用于蛋白质相对定量方法的研究

将亲和标记技术和基质辅助激光解吸电离飞行时间串联质谱联用,建立了蛋白质相对定量方法,以牛血清白蛋白为实验对象,考察了该方法的准确度、重现性等指标;又以数种标准蛋白混合物为研究对象,考察了该方法的动态范围及相应的标准偏差,为实际生物样品中差异蛋白质分析奠定了基础。     

电场作用下苏氨酸的电流特性研究

制备了以液态苏氨酸为沟道材料的四端有机场效应晶体管,观测了其随着栅极电压的不同呈现出源漏两极之间不同的电学特异现象;还观测了苏氨酸在外电场作用下,阻抗随着源漏之间电压频率变化的关系,提出一个极性液体模型解释了其导电机理。     

Synthesis and Crystal Structure of a Co（II） Coordination Polymer Derived from a Flexible Bipyridyl Derivative Ligand

1 INTRODUCTION The infinite networks constructed from transition metal complexes have attracted considerable current interest in recent years. The motivation behind this activity has been stimulated by their potential appli- cations in selective inclusion of ions, molecular re- cognition, host-guest chemistry, ion exchange, cata- lysis, electrical conductivity, magnetism, optics and so on[1～4]. It is well known that the diversity in structures and topologies of supramolecules is attri- b…     

Preparation of Z-L-Phe-OH-NBD imprinted microchannel and its molecular recognition study

An integrated microchip was presented for selective recognition of Z-L-Phe-OH-NBD, using molecular imprinting technique. Molecularly imprinted polymer (MIP) were prepared by copolymerization in the presence of template molecule Z-L-Phe-OH-NBD, in which methacrylic acid and 4-vinylpyridine were used as functional monomers and ethylene dimethacrylate used as crosslinker. Imprinted polymer particles were introduced into a microchannel fabricated with a new material i.e. poly(methylvinylsiloxane) by simply rapid prototyping method. Imprinted effects were evaluated by laser-induced fluorescence (LIF) detection where the results indicated that good selective recognition for Z-L-Phe-OH-NBD in the imprinted polymer was obtained; the adsorption percentage of Z-L-Phe-OH-NBD was 61%. In contrast to conventional molecular imprinting analysis, integration shortened overall analysis time from 4h to 10 min.