Comparison of standard addition and conventional isotope dilution mass spectrometry for the quantification of endogenous progesterone in milk

In this study, a standard addition–isotope dilution mass spectrometry (SA-IDMS) method for quantification of endogenous progesterone in milk has been described. The method validation results, linearity, limits of detection and quantification, recovery and uncertainty were fit for the purpose of assigning reference mass fractions to proficiency testing schemes. The developed technique was compared to the isotope dilution mass spectrometry (IDMS) method already existing in the laboratory. Analytical results of two milk samples were (1.377 ± 0.048) μg/kg and (4.457 ± 0.155) μg/kg by SA-ID-LC/MS method, while the results were (1.355 ± 0.019) μg/kg and (4.359 ± 0.059) μg/kg by ID-LC/MS, respectively. Since SA-IDMS was an effective quantitative method that overcame matrix effect, similar quantitative results from IDMS and SA-IDMS indicated that the quantification of progesterone in milk was barely influenced by matrix. Both IDMS and SA-IDMS could be used to assign reference mass fractions to progesterone in milk inter-laboratory proficiency testing schemes.     

Improving signal-to-noise ratio performance of compressive imaging based on spatial correlation

In this paper, compressive imaging based on spatial correlation (CISC), which uses second-order correlation with the measurement matrix, is introduced to improve the signal-to-noise ratio performance of compressive imaging (CI). Numerical simulations and experiments are performed as well. Referred to the results, it can be seen that CISC performs much better than CI in three common noise environments. This provides the great opportunity to pave the way for real applications.     

小型整体径向传输线的设计与实验

设计了一个小型整体径向传输线并对其传输特性进行了实验研究。该传输线由两块相距1 cm的铝合金平板组成,其特征阻抗采用双曲线型。1个输出端口位于传输线中央,20个输入端口均匀分布在传输线的外圆周上,最多可供20路脉冲同时注入。此传输线浸没于去离子水中,其单向传输时间为15 ns。负载由20个154 的电阻并联而成,以保证输出端的阻抗匹配。实验测得的输出电压波形与3维电磁场仿真结果非常接近。此外,还通过实验研究了不同驱动脉冲路数情况下小型整体径向传输线的输出电压,发现在驱动脉冲路数较少的情况下,输出电压的幅值几乎正比于驱动脉冲的路数。     

基于同步辐射的快速扫描X射线微束荧光成像方法

在上海光源硬X射线微聚焦光束线站(BL15U1)上, 基于EPICS软件平台, 集成运动控制, 光强探测, 荧光探测等功能, 实现了"飞行"模式 (on-the-fly) X射线扫描微束荧光成像方法. 用"飞行"扫描X射线荧光成像法获得了标准镍网, 以及微量元素Cu, Zn,K, Fe在样品老鼠脾内的分布图像, 结果显示该方法不但在速度上有了极大的提高, 而且获得的元素分布图像具有高质量. 关键词： 快速扫描X射线微束荧光成像 同步辐射 微量元素分布     

Ti-50.8at%Ni马氏体相变中的电磁特性

研究Ti-50.8at%Ni合金在马氏体-奥氏体相变温度附近的电磁性质.由M-H曲线分析了传导电子的顺磁性以及少量局域电子引起的铁磁性.在M-T曲线中，降温曲线在180K附近有突降，升温曲线在230K附近有突升.在电阻率测量中，降温和升温的ρ-T曲线也有类似的突变.升温过程的质量热容c_p曲线在230K附近出现了由奥氏体相变引起的跳跃.这些实验结果表明，样品的马氏体相变温度约 关键词： TiNi合金 电磁性质 马氏体-奥氏体相变 质量热容     

聚对苯撑对苯二甲酰胺液晶的相态转变

本工作以H(?)ppler流变粘度计、退偏振光法及小角激光光散射法研究了聚对苯撑对苯二甲酰胺的浓硫酸溶液在不同浓度和温度下的粘性行为、光学性质和区域结构的变化,发现聚对苯撑对苯二甲酰胺的各向异性溶液在不同温度下呈现向列型液晶和胆甾型液晶特征,说明芳香聚酰胺的液晶体系与小分子液晶相类似,也具有多种中介相的转变现象。这里的中介相转变是由向列型转变为胆甾型,但不是直接的同时是一个单变性的相转变过程。     

MORPHOLOGICAL STUDIES OF PET FILMS WITH DIFFERENT CRYSTALLIZATION RATE IN DRAWING PROCESSES

Morphological changes during stretching of two PET samples (S and T) with different crystallization rate have been studied by means of SALS, solvent etching and polarizing microscope techniques. Results show that under the same drawing conditions larger and more perfect rod-like and spherulitic superstructures were formed more easily in the sample with higher crystallization rate (sample S). The amount of less compact regions which may be easily attacked by the vapor of allyl amine decreases more rapidly in sample S than in sample T during stretching, and these regions are more randomly distributed in sample T especially at low elongations. The difference of the two samples in morphological changes is coincident with their difference in tensile behavior.     

Structures and properties of functional metal selenites and tellurites

Metal selenites and tellurites are a class of very important compounds. In this paper, the structures and properties of metal selenites or tellurites combining with transition-metal (TM) ions with the d (0) electronic configuration or tetrahedral MO 4 building blocks of post-transition main-group elements were reviewed. Most compounds in the alkali or alkaline-earth-d (0) TM-Se (IV) (or Te (IV))-O systems exhibit extended anionic architectures composed of distorted octahedra of (d (0)) TM cations and tellurite or selenite groups. The distortion of the octahedron is always away from the lone-pair cation, and some of them exhibit excellent second-order nonlinear optical properties due to the adductive effects of two types of bond polarizations. Because of the high coordination number of Ln (III) ions, most of compounds in the Ln-d (0) TM-Se (IV) (or Te (IV))-O systems are not second-harmonic-generation active; however, they are able to emit strong luminescence in the visible or near-IR region; also in most cases, the d (0) TM cations are in tetrahedral geometry and are well separated from selenite or tellurite groups. It is also interesting to note that the selenite group is normally "isolated", whereas the TeO x ( x = 3-5) can be polymerized into a variety of discrete polynuclear anionic clusters or extended architectures via Te-O-Te bridges.     

New fluorescent benzocrown ether derivatives of tetrathiafulvalene: facile synthesis and recognition properties

Two new fluorescent crown ether derivatives of tetrathiafulvalene (TTF) (2a and 2b) were synthesized and characterized; their electrochemical response to Na⁺ ions and fluorescence properties were investigated. The mechanism of the strong fluorescence has also been explored.     

TEXTURE AND CRYSTALLINITY EVOLUTION IN ISOTACTIC POLYPROPYLENE INDUCED BY ROLLING AND THEIR INFLUENCE ON MECHANICAL PROPERTIES

The orientation and crystallinity evolution of isotactic polypropylene （iPP） induced by rolling were studied using wide angle X-ray scattering with an area detector. The tensile mechanical properties of rolled isotactic polypropylene sheets were also measured in this work. The texture component method was used to analyze the rolling texture. The rolling texture consists mainly of （010）[001], （130）[001] and [001]//RD fiber components in the sample with a rolling true strain of 1.5. The results reveal that crystallinity drastically decreases during rolling. It is suggested that amorphization is a deformation mechanism which takes place as an alternative to crystallographic intralamellar slip depending on the orientation of the lamellae. Both the orientation and crystallinity affect the tensile mechanical properties of rolled polypropylene. Crystallinity influences the elastic modulus on both directions and yield strength on transverse direction at the first stage of deformation. Orientation is the main reason for the changes of mechanical properties, especially at the latter part of deformation. The changes of both tensile strength and elongation percentage on rolling direction are larger than those on transverse direction, which results from the orientation. At last, the anisotropic mechanical properties occur on the rolling and transverse direction： high tensile strength with low elongation percentage on rolling direction and low tensile strength with high elongation percentage on transverse direction.