膜蒸馏装置热容腔流场数值模拟的可行性分析

本文运用CFD软件,采用水作为工质,在第Ⅲ代膜组件基础上,对旋转切向入流空气隙膜蒸馏热容腔内的流场进行了模拟计算,通过数值模拟结果与实验数据的比较分析,验证了针对膜组件热容腔进行理论模拟所设置的物理模型和边界条件是符合实际的,理论模拟值和实验值的误差在20%范围内,其结果较为理想.     

Measurement and Analysis of Spall Characteristics of High-Pure Aluminium at One-Dimensional Strain Loading

With an impact velocity varying from 196.9m/s to 317.9m/s and ratios of flyer/sample thickness of 2：4 and 3：6, the free-surface velocity profiles of the shock compressed high purity aluminium （HPA 99.999%） samples are measured with a velocity interferometer system for any reflector. Based on the vibrating features of the velocity profiles, the damage behaviour of HPA is analysed. The results indicate that the vibrating amplitude increases with increasing shock stress, and the subsequent reverberations describing the spall become more obvious. When the shock stress in the material is below a critical or smaller than the threshold level, the free-surface velocity profile replicates virtually the form of the compression pulse inside the sample. When the impact stress exceeds a critical value （1.4 GPa）, the micro damage would appear, and the free-surface velocity profile changes significantly, showing a series of short-duration reverberations in the profile. When the impact stress exceeds the threshold of damage, a compressive disturbance called the ＂spall pulse＂ appears in the free-surface velocity profile, and the subsequent reverberation becomes regular again. The measured spall strength of HPA is much higher than those of commercially pure aluminium reported in many references. In addition, the strength of HPA is similar to that of single-crystal aluminium.     

Multipartite State Representations in Multi-mode Fock Space and Their Squeezing Transformations

We present the continuous state vector of the total coordinate of multi-partlcle and the state vector of their total momentum, respectively, which possess completeness relation in multi-mode Fock space by virtue of the integration within an order product （IWOP） technique. We also calculate the transition from classical transformation of variables in the states to quantum unitary operator, deduce a new multi-mode squeezing operator, and discuss its squeezing effect. In progress, it indicates that the IWOP technique provides a convenient way to construct new representation in quantum mechanics.     

A Novel Method for Wavelength Conversion with Dual-pump Four-wave Mixing in a Semiconductor Optical Amplifier

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　ＩｎｔｈｅＷＤＭｎｅｔｗｏｒｋ ,ｔｈｅｄｅｓｉｒａｂｌｅｆｅａｔｕｒｅｓｏｆａｎａｌｌ ｏｐｔｉｃａｌｗａｖｅｌｅｎｇｔｈｃｏｎｖｅｒｔｅｒｉｎｃｌｕｄｅｐｏｌａｒｉｚａｔｉｏｎｉｎｓｅｎｓｉｔｉｖｉｔｙ ,ｔｒａｎｓｐａｒｅｎｃｅｔｏｍｏｄｕｌａｔｉｏｎｆｏｒｍａｔａｎｄｂｉｔ ｒａｔｅ ,ｆｕｌｌｔｕｎａｂｉｌｉｔｙ ,ａｃｃｅｐｔａｂｌｅｏｕｔｐｕｔＳＮＲｏｖｅｒｔｈｅｅｎｔｉｒｅｒａｎｇｅｏｆｔｈｅｗａｖｅｌｅｎｇｔｈｓｕｓｅｄｉｎｔｈｅｎｅｔｗｏｒｋ[1] .Ｗａｖｅ…     

中温烟气脱硫过程中CO2对脱硫剂钙利用率的影响

本文在300～600℃的中温区段,实验研究了CO2在烟气脱硫过程中与钙基脱硫剂发生碳酸盐还原反应,削弱脱硫效果的规律,发现石灰钙利用率随温度升高呈跳跃式变化,并因碳酸盐反应程度的迅速增加而在500℃附近出现低谷.由此明确了减小碳酸盐反应效应,提高脱硫剂钙利用率的途径,为进一步发展中温烟气脱硫工艺提供了重要依据.     

两种非线性反铁磁晶体交界面上磁表面波的传播特性

研究了两非线性单轴反铁磁晶体交界面上表面波的传播特性.理论分析和数值模拟表明:入射电磁波只有同时满足频率阈值和功率阈值条件才能在该非线性波导系统中形成稳定传播的表面波.随着传输功率的不断提高,磁场峰值将由一非线性晶体中跃入另一非线性晶体中,并逐渐靠近交界面.表面波动率变化不会对交界面处的磁场振幅产生影响,频率是影响其振幅大小的唯一因素. 关键词： 反铁磁晶体 非线性表面波     

富镧混合稀土-镍贮氢材料CO,O2和H2O中毒的表面特征

本文用UPS,XPS研究了贮氢材料MlNi₅(Ml=La,Ce,Pr,Nd)的CO,O₂和H₂O的中毒,在UPS谱中,我们观察到在E_F以下峰α(0.3eV)和峰b(1.2eV)强度随中毒气体暴露量增加有显著变化,并向低动能端位移,逐渐形成肩峰,与此同时,峰c(6eV)和峰d(9.5eV)的强度随暴露量增加而增加,并有能量位移,配合XPS分析,分别确定相应的化学态。氧中毒后的MlNi₅,经300℃加氢还原,从UPS谱可以看到峰α,b强度增加;H₂O和CO中毒后,在超高真空条件下,分别经300℃加热处理,和Ar⁺剥离方法,均获得类似的效果,XPS分析进一步证实了这些结果。实验给出了贮氢材料MlNi₅中过渡金属镍的d电子与气体自由分子轨道间电荷转移的信息,为在实际应用中认识此类贮氢合金的表面催化中毒和再生提供了依据。 关键词：     

非对称型Kerr类介质膜漏波导中的非线性导波

本文研究了特定边界条件下非对称型Kerr类介质膜漏波导中TE₀光波的传播特性。计算结果表明,介质膜厚存在一临界值。临界值之上没有导波存在,临界值之下能同时存在强场TE₀模和弱场TE₀模,它们具有不同的传播波数。这两个模的膜内传播功率、场强峰值位置随膜厚和光场频率的变化各不相同,色散关系也有极大差别。在对称极限之下,弱场TE₀模的色散为零。 关键词：     

蒸汽活化提高脱硫剂钙利用率的实验研究

本文用小型热态流化床实验台对以ＣａＯ为主要成分的钙基脱硫剂石灰乏吸收剂在１５０～６００℃的温度范围内进行了蒸汽活化处理,进而实验研究了这种处理对提高脱硫剂钙利用率的效果。结合化学成分分析和Ｘ射线衍射的结果初步探讨了蒸汽活化的机理。研究表明,脱硫剂对水蒸汽的物理吸附明显受活化温度的影响,蒸汽活化后的钙利用率提高显著,可能存在一个最佳活化时间。     

双差分测量对流层臭氧的实验研究

 提出了利用266nm,289nm,308nm三波长进行臭氧测量的数值模拟和实际测量实验研究。三波长双差分和双波长差分的模拟实验结果表明,当对流层气溶胶分布相当不均匀,后向散射比梯度较大时,气溶胶对双波长差分测量臭氧影响很大,而对三波长双差分测量臭氧影响较小。