偶氮材料——乙基橙的光致双折射特性

将偶氮化合物乙基橙样品置于一对正交的偏振片之间，用一束激发光照射该样品，分别测量 在激发光的不同强度和不同偏振方向下探测光的透射功率，研究样品的双折射特性.实验表 明，透射光的饱和值和稳定值与激发光强成正比，且与激发光偏振方向有关，探测光与激发 光振动方向的夹角(θ)为45°时，其值最大；若θ不太小（>10°），sin²2θ 与透射光的饱和值、稳定值成线性关系.同时，利用巴俾涅补偿器对样品的双折射率差进 行了测量，分别得到了绿光激发前后的准确数值为1.11×10^-3和3.57×10 ^-3. 关键词： 偶氮 双折射 测量     

Y(Fe,M)12化合物的电子结构与磁性(M=Nb,Si)

采用新近发展的全势能线性缀加平面波((L)APW) 局域轨道(lo)和广义梯度近似(GGA)密度泛函方法计算了Y(Fe,M)12化合物(M=Nb,Si)的电子结构,得到了相应的总态密度和局域态密度,并分析了替代原子与替代晶位不同引起态密度的变化。根据计算结果预测的居里温度变化与实验结果基本一致。     

Ab Initio Comparative Study of Zincblende and Wurtzite ZnO

By employing the first-principles pseudopotential plane-wave method, the physical properties of zincblende ZnO are investigated in comparison with those of the common wurtzite structure. Zincblende ZnO is predicted to be a direct gap semiconductor. Compared to the wurtzite structure, the zincblende ZnO is characterized by smaller bandgap and pressure coefficient, larger electron effective mass, increasing static dielectric constants and more covalent bonding. Furthermore, the optical properties including dielectric function and energy loss function of zincblende ZnO were obtained and analysed with some features. These aspects reveal promising applications of zincblende ZnO in optoelectronic devices.     

Effect of Temperature on the Void Growth in Pure Aluminium at High Strain-Rate Loading

With the environment temperature varying from 273 K to 773 K, the dynamic process of void growth in pure aluminium at high strain-rate loading is calculated based on the dynamic growth equation of a void with internal pressure. The result shows that the effect of temperature on the growth of void should be emphasized. Because the initial pressure of void with gas will increase and the viscosity of materials will decrease with the rising of temperature, the growth of void is accelerated. Furthermore, material inertia restrains the growth of void evidently when the diameter exceeds 10 μm. The effect of surface tension is very weak in the whole process of void growth.     

Measurement and Analysis of Spall Characteristics of High-Pure Aluminium at One-Dimensional Strain Loading

With an impact velocity varying from 196.9m/s to 317.9m/s and ratios of flyer/sample thickness of 2：4 and 3：6, the free-surface velocity profiles of the shock compressed high purity aluminium （HPA 99.999%） samples are measured with a velocity interferometer system for any reflector. Based on the vibrating features of the velocity profiles, the damage behaviour of HPA is analysed. The results indicate that the vibrating amplitude increases with increasing shock stress, and the subsequent reverberations describing the spall become more obvious. When the shock stress in the material is below a critical or smaller than the threshold level, the free-surface velocity profile replicates virtually the form of the compression pulse inside the sample. When the impact stress exceeds a critical value （1.4 GPa）, the micro damage would appear, and the free-surface velocity profile changes significantly, showing a series of short-duration reverberations in the profile. When the impact stress exceeds the threshold of damage, a compressive disturbance called the ＂spall pulse＂ appears in the free-surface velocity profile, and the subsequent reverberation becomes regular again. The measured spall strength of HPA is much higher than those of commercially pure aluminium reported in many references. In addition, the strength of HPA is similar to that of single-crystal aluminium.     

胶束体系中曲克芦丁的荧光特性及其分析应用

对曲克芦丁在胶束体系中的荧光性质进行了研究。实验发现在NaAc-HAc缓冲体系中,曲克芦丁自身具有较弱的内源性荧光,加入适量的表面活性剂十二烷基苯磺酸钠-6(SDBS-6),可使曲克芦丁与SDBS-6形成胶束配合物,体系微环境发生改变,使荧光发射强度显著增强,荧光增强程度与曲克芦丁的含量在一定范围内呈良好的线性关系。据此提出了基于SDBS-6增敏胶束荧光光谱法测定微量曲克芦丁的新方法。对测定条件进行了详细研究,结果表明： 在pH 5.53的NaAc-HAc缓冲体系中,当最大激发波长λex=350.0 nm,最大发射波长λ_em=456.3 nm时,方法线性范围为1.6×10-6 mol·L-1～8.0×10-10 mol·L-1,检出限1.1×10-10 mol·L-1,相对标准偏差为1.7%(n=11,c=6.0×10-7 mol·L-1)。方法用于片剂和注射液中曲克芦丁的测定,回收率为98.5%～100.4%,结果令人满意。     

LD侧面抽运板条激光器热效应分析

针对板状Nd:YLF激光介质,在高斯光束抽运情况下,用ANSYS有限元软件模拟了激光介质的热效应,对激光介质中各点的温度和应力分布进行了分析和比较.研究发现双侧抽运与单侧抽运相比,更易获得对称的温度分布,随着抽运光斑横截面变大,抽运面中心温度变低.同时得到板条的棱边、端角处存在较大热应力,且引入的机械应力不可忽视,因此,激光器运转时此区域需防止断裂.     

植被双向反射分布函数的模型及其发展

介绍了双向反射分布函数(BRDF)的概念和反映植被特性的归一化植被指数(NDVI)、增强植被指数(EVI)、差值植被指数(DVI)等一些重要指数参数。评述了近年发展起来的植被BRDF模型的构建方法,例如统计反演方法,MODIS植被指数合成法和集合卡曼滤波法(EnKF)。分析了目标表面BRDF数据的获取方法和改进的驱动核算法。对BRDF模型的发展趋势进行了展望。     

大视场光学遥感器焦平面板的研制

焦平面板作为承载TDICCD器件的部件,其强度、动静态刚度、热稳定性直接影响到遥感器的成像质量.针对目前光学遥感器大视场、宽覆盖的发展趋势,设计了一种新型的焦平面板.选用性能指标优良的高体份SiC/Al复合材料,既满足了结构设计指标的要求,同时又大大降低了产品重量.通过有限元模拟仿真分析和相关试验,验证了设计方案的可行...     

Yb~(3+)/Er~(3+)掺杂氟氧化物微晶玻璃的制备与发光性能

采用高温熔融法制备了Yb3+/Er3+掺杂的氟氧化物发光微晶玻璃,确定了最佳熔化温度(1 100℃)和退火温度(440℃,480℃)。测定得到基质玻璃的透过率为85%,掺入稀土后,透过率有所下降,并出现了稀土离子的特征吸收峰。980 nm半导体激光器(LD)激发下样品的上转换发射光谱存在4个明显的发射峰,分别为410,532,546和656 nm,对应于2H9/2→4I15/2,2H11/2→4I15/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁。研究了不同Yb3+/Er3+(摩尔分数)和Er3+浓度对上转换发光强度的影响,当Yb3+∶Er3+=4∶1、Er3+摩尔分数为1.5%时,上转换发光强度达到最高。根据发光强度与泵浦功率之间的关系,确定了上转换发射均为双光子过程。讨论了Yb3+,Er3+离子间的能量传递,建立了上转换发光机制。