Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

Complete ozonolysis of alkyl substituted ethenes at -60 degrees C: distributions of ozonide and oligomeric products

The distribution of ozonide and oligomeric structures formed on complete ozonolysis of alkenes in a non-participating solvent at -60 degrees C is governed by the alkyl substitution around the carbon-carbon double bond. The ozonolysis of a 1,1-alkyl substituted ethene generally favours the formation of an ozonide (a 1,2,4-trioxolane). Whereas the ozonolysis of a 1,1,2-alkyl substituted ethene also produces ozonide, a considerable amount of the ozonised products are oligomeric in nature. For example, the ozonolysis of 3-methylpent-2-ene in solution to high conversion in pentane yields oligomers with structural units derived from the fragmentation products of the primary ozonide (a 1,2,3-trioxolane) which are namely butanone carbonyl oxide and acetaldehyde; these can be characterised by electrospray ionisation mass spectroscopy (ESI-MS) under soft ionisation conditions. The predominant oligomers formed are rich in carbonyl oxide units (80 + mol%) and are cyclic in nature. A small proportion of the oligomers formed are open chain compounds with end groups that suggest that chain termination is brought about either by water or by hydrogen peroxide. Residual water in the solvent will react with the carbonyl oxides to produce 2-methoxybut-2-yl hydroperoxide, which we propose readily decomposes generating hydrogen peroxide. A significant yield of oligomers also is obtained from the ozonolysis of a 1,2-alkyl substituted ethene. The ozonolysis of trans-hex-2-ene in pentane yields oligomers containing up to four structural units and are predicted to be mainly cyclic.     

Intermolecular coupling of alkenes to heterocycles via C-H bond activation

The intermolecular coupling of unactivated alkenes to a range of heterocycles using a Rh(I) catalyst was investigated. A variety of functional groups were incorporated into the alkene, including esters, nitriles, acetals, and phthalimide. Furthermore, the heterocycle tolerated substitution with both electron-rich and electron-deficient groups. The intermolecular coupling became possible after it was discovered that weak acids dramatically increase the rate of both the inter- and intramolecular reactions. An extensive optimization of additives was performed, and HCl.PCy(3) (Cy = cyclohexyl) and HCl.P-t-Bu(2)Et were in general found to be the best additives for the reaction.     

Energetics of proton transfer between carbon atoms (H3CH ? CH3)−

Ab initio calculations were carried out to study the potential energy surface of (H₃C? H? CH₃)^?. The 6–31G* basis set is supplemented by a set of diffuse p functions on both C and H (with a range of exponents for the latter). The binding energy of CH₄ and CH₃^? to form the (H₃CH? CH₃)^? complex is about 2 kcal/mol, much smaller than for comparable ionic H-bonded systems involving O or N atoms. Nearly half of this interaction energy is due to correlation effects, computed at second and third orders of Møller-Plesset perturbation theory. Correlation is also responsible for substantial reductions in the energy barrier to proton transfer within the complex. This barrier is computed to be 13?15 kcal/mol at the MP3 level, depending upon the exponent used for the H p functions.     

Model networks of end-linked polydimethylsiloxane chains

Summary Elastomeric networks of high extensibility were prepared by end-linking mixtures of vinyl-terminated polydimethylsiloxane chains having molecular weights of approximately 600 and 11,000 g mol^–1, with silanes chosen to give junction functionalities ranging from 3 to 8. The resulting bimodal networks were studied in elongation, at 25 °C, to their rupture points, and in swelling equilibrium in benzene at room temperature. The elongation moduli [f ^*] were found to be in satisfactory agreement with previous results obtained by end-linking hydroxyl-terminated polydimethylsiloxane chains. Values of [f ^*] at low and moderate deformations gave relatively low values of the ratio of elasticity constants 2C ₂/2C ₁, which is a measure of the extent to which the elongation changes from approximately affine to nonaffine as the elongation increases. The low values obtained for this ratio are presumably due to diminished interpenetration of configurational domains in the case of very short chains. In spite of its small magnitude, 2C ₂/2C ₁ does show some decrease with increase in , as predicted by the recent molecular theory of rubberlike elasticity developed by Flory. The swelling equilibrium results were also found to be in satisfactory agreement with theory. The elongation moduli increased significantly at high elongations, and the values of the elongation at which the upturn was first discernible were very nearly independent of , This is consistent with the interpretation of this anomalous behaviour in terms of limited chain extensibility. The maximum extensibility generally decreased somewhat with increase in and this caused a decrease in both the ultimate strength and the toughness of the elastomer, as measured by the energy required for rupture.     

Synthesis of phenylated phthalimides. The diels-alder reaction of tetraphenylcyclopentadienone with maleimides

A series of phenylated dihydrophthalimides has been synthesized by the Diels-Alder reaction of tetraphenylcyclopentadienone with maleimide, N-phenylmaleimide, and N,N'-o-, -m-, and -p-phenylenedimaleimide. Subsequent dehydrogenation of these compounds yielded the corresponding phenylated phthalimides. These phthalimides were also obtained in one step when the initial reactions were carried out in refluxing nitrobenzene.     

Molecular orbital treatments of hydrogen bonded systems. 2. Dimers of water and HCN

Calculations were performed to investigate the reliabilities of the CNDO/2, PRDDO, and MNDO approximate molecular orbital methods. Systems selected for study included the linear, cyclic, and bifurcated dimers of water as well as the linear and cyclic dimers of HCN. The PRDDO method was found to provide the most consistently accurate reproduction of ab initio and experimental data. CNDO/2 performed fairly well in a number of cases but yielded extremely poor results for the cyclic dimers of both H₂O and HCN. Hydrogen bond strengths were consistently underestimated by MNDO which also furnished erroneously large intermolecular separations. In addition, MNDO calculations indicate the bifurcated water dimer to be most stable in contrast to other quantum mechanical and experimental information.See Ref. [1] for Paper 1 of this series.     

Ozonolysis of tetramethylethylene: characterization of cyclic and open-chain oligoperoxidic products

The ozonolysis of tetramethylethylene (TME) in solution to high conversion in nonparticipating solvents at -60 degrees C yields predominantly oligoperoxides. For the first time, these products have been characterized using electrospray ionization mass spectrometry (ESI-MS) under soft ionization conditions. The predominant structure formed in reactions carried out in pentane (up to 2.0 M TME) is shown to be the cyclic hexamer of acetone carbonyl oxide (oligocarbonyl oxide with degree of polymerization, n = 6), but cyclic structures with n up to 19 are observed. A small proportion of the oligoperoxides formed are open-chain compounds with end groups that suggest that chain termination of oligocarbonyl oxides can occur through reaction with either water or hydrogen peroxide. Ozonolysis in dried butyl acetate similarly produces mainly cyclic oligoperoxides. However, ozonolyses carried out in undried butyl acetate yield mainly open-chain oligoperoxides, confirming that propagating carbonyl oxide chains are readily terminated by water. Relative amounts of the open-chain oligomers so-formed suggest that undried butyl acetate contains ca. 0.1% w/w water. The ozonolysis of TME in the participating solvent, methanol, at -60 degrees C yields 2-methoxyprop-2-yl hydroperoxide via reaction of acetone carbonyl oxide with methanol; no oligoperoxidic products are formed in this case.