Phase shift moiré studies of processing-induced residual strains in Nickel 200 spot welds

Processing-induced residual strains in solid cylinders of Nickel 200 were investigated using phase shifting moiré interferometry. Two different experimental approaches were used to study the strains produced during Tungsten-inert gas spot welding. A comparison of results for a ‘hot/fast’ and a ‘cool/slow’ weld demonstrate the capabilities of the general approach. Both experimental methods revealed distinct differences in the residual displacement and strain fields between the two types of welds.     

Coherent States and Number-Phase Uncertainty Relations

The number-phase uncertainty relations arerevisited in view of the recent discovery of a propercovariant phase observable. The high-amplitude limits ofthe coherent-state expectations of the moment operators of the phase observable are determined and thebehavior of the number-phase uncertainty product in thatlimit is investigated.     

Investigation of acceptor centers in semiconductors with the diamond crystal structure by the μ − SR method

The residual polarization of negative muons in crystal silicon samples with phosphorus (P: 1.6×10¹³ cm⁻³) and antimony (Sb: 2×10¹⁸ cm⁻³) impurities is investigated. The measurements are made in a 1000 G magnetic field oriented in a direction transverse to the muon spin in the temperature range 4–300 K. The relaxation rate and shift of the precession frequency in the silicon sample with the phosphorus impurity are measured more accurately than previously. It is found that in antimony-doped silicon the acceptor center _μ A1 at temperatures below 30 K can be in both ionized and neutral states. The experimental data are interpreted on the basis of spin-lattice relaxation of the magnetic moment of an acceptor center, formation of acceptor-donor pairs, and recombination of charge carriers at the acceptor. Preliminary measurements showed a nonzero residual polarization of negative muons in germanium. Pis’ma Zh. éksp. Teor. Fiz. 68, No. 1, 61–66 (10 July 1998)     

Optical detection of NO3 and NO2 in “pure” HNO3 vapor,the liquid-phase decomposition of HNO3

Flowing and static gas-phase samples of HNO₃ in O₂ and N₂ were analyzed by long-path ultraviolet/visible (UV/VIS) spectroscopy to reveal the presence of both NO₂ and NO₃, the concentrations of which were calculated using differential absorption cross sections. NO₂ is produced predominantly by the heterogeneous decomposition of HNO₃, whereas NO₃ is generated in the gas phase by the thermal decomposition of N₂O₅, a product of the self-disproportionation of liquid HNO₃. © 1993 John Wiley & Sons, Inc.     

Measurement of cathode spot parameters with pulsed laserdiagnostics

The cathode spot formation in air within the first 170 ns was investigated by laser absorption photography and ps-pulse interferometry. The discharge was initiated between electrodes made from Ag or Pd with cathode-anode distance below 300 μm, the arc duration was some milliseconds, and the arc current 5-10 A. Picosecond holographic interferometry and momentary absorption photography yielded spatial-temporal density distributions in the ignition phase of the cathode spot. An absolute electron density value on the order of 4×10²⁶ m^-3 has been found. In contrast to vacuum, the cathode spot plasmas broaden little with increasing distance from the cathode, thus narrow plasma channels are observed in the vicinity of the cathode surface having diameters <20 μm     

Investigation of microbial—mineral interactions by Mössbauer spectroscopy

Mössbauer spectroscopy was used to investigate the reactions of microbes with iron minerals in aqueous solutions and as components of rocks in banded iron formations and granite. A microbial biofilm that formed on a wall of an excavated granite vault in a deep underground laboratory initiated this research. At the aerobic face of the biofilm, iron was found in a form of ferrihydrite; in the anaerobic face against the rock, iron was found as very small siderite particles. Laboratory incubations of the biofilm microbial consortium showed different mineral species could be formed. When the microbial consortium from the biofilm was incubated with magnetite grains, up to about 10% of the iron was altered in three weeks to hematite. The ability of the consortium to precipitate iron both as Fe²⁺ and Fe³⁺ in close proximity may have a bearing on the deposition of banded iron formations. These reactions could also be important in microbially induced corrosion.     

Photodiffraction in InGaAs/InGaAsP multiple quantum wells enclosed in a microcavity

We report new results on the diffraction properties of photoinduced gratings in InGaAs/InGaAsP MQW structures. The original feature of this device is that the QWs are enclosed in an asymmetric Fabry–Perot microcavity in order to increase the diffraction efficiency. We observe oscillations in the diffraction efficiency due to resonant effects in the microcavity. The experimental spectra are compared with theory. Diffraction efficiency at 1.55 μm attains a maximum value of 2.7% at a write beam fluence of 260 μ J cm⁻², and then decreases at higher fluences. We explain this phenomenon by an absorption saturation at high excitation.     

The Characterisation of the Products of Reduction of Chinkombe Ilmenite

The characterisation of iron-containing species in Chinkombe ilmenite and its reduction products was undertaken using Mössbauer Spectroscopic techniques. The ore was reduced by graphite in an inert atmosphere. The effects of such variables as quantity of reductant, temperature and preoxidation were investigated. The ore was completely reduced to alpha-iron and titanium dioxide with 20% carbon for a period of one hour at 1373 K. Chemical mechanisms are proposed for the reduction and oxidation of Chinkombe ilmenite. In the processing of ilmenite to obtain synthetic rutile, the ultimate desire is to separate the Fe phase from the TiO₂. Mössbauer Spectroscopy has unambiguously confirmed the desired transformation of the iron phase according to thermodynamic predictions. The information gained would be used to choose the conditions of the reduction process. The alpha-iron could be separated physically or chemically from the completely reduced product mass to obtain synthetic titanium dioxide suitable for the paint industry.     

Thickness and temperature dependence of subsidiary absorption thresholds in yttrium-iron-garnet thin films

The microwave subsidiary absorption threshold in tangentially magnetized yttrium-iron-garnet (YIG) films was measured as a function of the static magnetic field, film thickness and decrease in the 0.3–3 μm range is observed. The effect is explained quantitatively by using modified Damon-Eshbach dispersion relations which take into account exchange interactions.

The effect of temperature on h_crit, the smallest threshold field amplitude, in the 250<T< 450 K temperature range can be expressed by an empirical relationship h_crit M_s(T)^-1.6 where M_s is the saturation magnetization. This h_crit vs M_s relationship is similar to that obtained for the magnetization dependence of parallel pump thresholds in Li-Ti ferrite compounds.