From Distinct Metallopeptoids to Self-Assembled Supramolecular Architectures

The construction of synthetic protein mimics is a central goal in chemistry. A known approach for achieving this goal is the self-assembly of synthetic biomimetic sequences into supramolecular structures. Obtaining different 3D structures via a simple sequence modification, however, is still challenging. Herein we present the design and synthesis of biomimetic architectures, via the self-assembly of distinct copper-peptoid duplexes. We demonstrate that changing only one non-coordinating side-chain within the peptoids—sequence-specific N-substituted glycine oligomers—leads to different supramolecular structures. Four peptoid trimers incorporating 2,2’-bipyridine and pyridine ligands, and a non-coordinating but rather a structure-directed bulky group were synthesized, and their solutions were treated with Cu²⁺ in a 1:1 ratio. Single-crystal X-ray analysis of the products revealed the self-assembly of each peptoid into a metallopeptoid duplex, followed by the self-assembly of multiple duplexes and their packing into a three-dimensional supramolecular architecture via hydrogen bonding and π–π interactions. Tuning the non-coordinating side-chain enables to regulate both the final structure being either a tightly packed helical rod or a nano-channel, and the pore width of the nano-channels. Importantly, all the metallopeptoids structures are stable in aqueous solution as verified by cryo-TEM measurements and supported by UV/Vis and EPR spectroscopies and by ESI-MS analysis. Thus, we could also demonstrate the selective recognition abilities of the nano-channels towards glycerol.     

Aromatic Aza-Claisen Rearrangement of Arylpropargylammonium Salts Generated in situ from Arynes and Tertiary Propargylamines

The charge-accelerated aza-Claisen rearrangement of ammonium salts serves as a key step in the construction of complex nitrogen-containing molecules. However, much less attention has been paid to the aromatic aza-Claisen rearrangement than to the aliphatic one. Herein, we report an unprecedented aromatic aza-Claisen rearrangement of arylpropargylammonium salts, generated in situ from arynes and tertiary propargylamines, delivering structurally diverse 2-propargylanilines in moderate to good yields with high regioselectivity. This rearrangement proceeds in the absence of strong bases or transition metals, is compatible with moisture and air, tolerates a wide variety of functional groups, and is amenable to forming 11- to 13-membered heterocycles with a triple bond. The 2-propargylaniline products were treated with aluminum chloride in ethanol to afford multisubstituted indoles in moderate to excellent yields. Finally, a series of deuterium-labeling experiments was performed to elucidate the reaction mechanism.     

A Carbocationic Triarylmethane-Based Porous Covalent Organic Network

A thermally stable carbocationic covalent organic network (CON), named RIO-70 was prepared from pararosaniline hydrochloride, an inexpensive dye, and triformylphloroglucinol in solvothermal conditions. This nanoporous organic material has shown a specific surface area of 990 m² g⁻¹ and pore size of 10.3 Å. The material has CO₂ uptake of 2.14 mmol g⁻¹ (0.5 bar), 2.7 mmol g⁻¹ (1 bar), and 6.8 mmol g⁻¹ (20 bar), the latter corresponding to 3 CO₂ molecules adsorbed per pore per sheet. It is shown to be a semiconductor, with electrical conductivity (σ) of 3.17×10⁻⁷ S cm⁻¹, which increases to 5.26×10⁻⁴ S cm⁻¹ upon exposure to I₂ vapor. DFT calculations using periodic conditions support the findings.     

The Effect of Auxiliary Nitrogenated Linkers on the Design of New Cadmium-Based Coordination Polymers as Sensors for the Detection of Explosive Materials

Three new cadmium-based coordination polymers, denoted [Cd(hfipbb)(4,4’-bipy)] ( CdPF-1 ), [Cd(hfipbb)(2,2’-bipy)] ( CdPF-2 ), and [Cd(hfipbb)(1,10-phen)] ( CdPF-3 ), have been hydrothermally synthesized by using the well-known V-shaped organic linker 4,4’-(hexafluoroisopropylidene)bis(benzoic acid) (H₂hfipbb), together with different nitrogenated auxiliary linkers. Considering the d¹⁰ configuration of the transition metal selected, the luminescent properties for these CdPF-n materials were explored, finding that materials CdPF-2 and CdPF-3 act as excellent sensors in the detection of explosive nitro aromatic compounds. The photoluminescence properties of CdPF-2 and CdPF-3 revealed that significant and sensitive fluorescence quenching was observed toward NP (nitrophenol) for CdPF-2 and PA (picric acid) for CdPF-3 in MeOH suspensions.     

Synthesis and Biological Activity of Ferrocenyl and Ruthenocenyl Analogues of Etoposide: Discovery of a Novel Dual Inhibitor of Topoisomerase II Activity and Tubulin Polymerization

Two series of the ferrocenyl and ruthenocenyl analogues of etoposide bearing 1,2,3-triazolyl or aminoalkyl linker were synthesized and evaluated for their cytotoxic properties, influence on the cell cycle, ability to induce tubulin polymerization, and inhibition of topoisomerase II activity. We found that the replacement of the etoposide carbohydrate moiety with a metallocenyl group led to organometallic conjugates exhibiting differentiated antiproliferative activity. Biological studies demonstrated that two ferrocenylalkylamino conjugates were notably more active than etoposide, with submicromolar or low-micromolar IC₅₀ values towards SW620, etoposide-resistant SW620E, and methotrexate-resistant SW620M cancer cell lines. Moreover, the simplest ferrocenylmethylamino conjugate exerted dual inhibitory action against tubulin polymerization and topoisomerase II activity while other studied compounds affected only topoisomerase II activity.     

Filling the Charge–Discharge Voltage Gap in Flexible Hybrid Zinc-Based Batteries by Utilizing a Pseudocapacitive Material

The high charge–discharge voltage gap is one of the main bottlenecks of zinc–air batteries (ZABs) because of the kinetically sluggish oxygen reduction/evolution reactions (ORR/OER) on the oxygen electrode side. Thus, an efficient bifunctional catalyst for ORR and OER is highly desired. Herein, honeycomb-like MnCo₂O_4.5 spheres were used as an efficient bifunctional electrocatalyst. It was demonstrated that both ORR and OER catalytic activity are promoted by Mn^IV-induced oxygen vacancy defects and multiple active sites. Importantly, the multivalent ions present in the material and its defect structure endow stable pseudocapacitance within the inactive region of ORR and OER; as a result, a low charge–discharge voltage gap (0.43 V at 10 mA cm⁻²) was achieved when it was employed in a flexible hybrid Zn-based battery. This mechanism provides unprecedented and valuable insights for the development of next-generation metal–air batteries.     

Electrochemical Tri- and Difluoromethylation-Triggered Cyclization Accompanied by the Oxidative Cleavage of Indole Derivatives

Considering their unique roles in organic synthesis, and pharmaceutical and agrochemical applications, the development of fluoroalkylation, cyclization, and indole oxidative cleavage are important topics. Herein, an unprecedented electrochemical tri- and difluoromethylation/cyclization/indole oxidative cleavage process occurring in an undivided cell is presented. The protocol employs a readily prepared Langlois reagent as the fluoroalkyl source, affording a series of tri- or difluoromethylated 2-(2-acetylphenyl)isoquinoline-1,3-diones in good yields with excellent stereoselectivity. It is worth noting that this new methodology merges the fluoroalkylation/cyclization of N-substituted acrylamide alkenes with the oxidative cleavage of an indole C(2)=C(3) bond under external oxidant-free conditions.     

Novel WS2/Fe0.95S1.05 Hierarchical Nanosphere as a Highly Efficient Electrocatalyst for Hydrogen Evolution Reaction

Fe_0.95S_1.05 with high reactivity and stability was incorporated into WS₂ nanosheets via a one-step solvothermal method for the first time. The resulted hybrid catalyst has much higher catalytic activity than WS₂ and Fe_0.95S_1.05 alone, and the optimal WS₂/Fe_0.95S_1.05 hybrid catalyst was found by adjusting the feed ratio. The addition of Fe_0.95S_1.05 was proven to be able to enhance the hydrogen evolution reaction (HER) activity of WS₂, and vice versa. At the same time, it was found that the catalytic effect of the hybrid catalyst was the best when the feed ratio was W : Fe=2 : 1. In other words, we confirmed that there is a synergistic effect between W- and Fe-based sulfide hybrid catalysts, and validated that the reason for the improved HER performance is the strong interaction between the two in the middle sulfur. WS₂/Fe_0.95S_1.05-2 hybrid catalyst leads to enhanced HER activity, which shows a low overpotential of ∼0.172 V at 10 mA cm⁻², low Tafel slope of ∼53.47 mV/decade. This study supplies innovative synthesis of a highly active WS₂/Fe_0.95S_1.05 hybrid catalyst for HER.     

A Novel Reactivity of Phosphanylalumane (>P−Al<): Reversible Addition of a Saturated Interelement Bond to Olefins

The reversible addition of olefins to a phosphanylalumane, P−Al single-bond species, was investigated. The P−Al bond added to ethylene and relatively small terminal alkenes (propylene and hex-1-ene) at room temperature to give the corresponding alkene adducts. Heating the terminal alkene adducts released the corresponding alkenes and regenerated the P−Al bond, but no release of ethylene was observed even under vacuum conditions. The reactivity of ethylene adduct as a new saturated C₂ vicinal P/Al-based FLP was also investigated. The ethylene adduct was found to undergo complexation with nitriles to give the corresponding nitrile adducts to the Al center, which retained the ethylene tether as in the case of the corresponding P/B-based FLP. However, the reactivity of ethylene toward CO₂ and benzaldehyde differed from that of the P/B system giving the corresponding adducts.