Luminescent Di‐ and Trinuclear Boron Complexes Based on Aromatic Iminopyrrolyl Spacer Ligands: Synthesis,Characterization, and Application in OLEDs

New bis‐ and tris(iminopyrrole)‐functionalized linear (1,2‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 2 ), 1,3‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 3 ), 1,4‐(HNC₄H₃‐C(H)?N)₂‐C₆H₄ ( 4 ), 4,4′‐(HNC₄H₃‐C(H)?N)₂‐(C₆H₄‐C₆H₄) ( 5 ), 1,5‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 6 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₀H₆ ( 7 ), 2,6‐(HNC₄H₃C‐(H)?N)₂‐C₁₄H₈ ( 8 )) and star‐shaped (1,3,5‐(HNC₄H₃‐C(H)?N‐1,4‐C₆H₄)₃‐C₆H₃ ( 9 )) π‐conjugated molecules were synthesized by the condensation reactions of 2‐formylpyrrole ( 1 ) with several aromatic di‐ and triamines. The corresponding linear diboron chelate complexes (Ph₂B[1,3‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 10 ), Ph₂B[1,4‐bis(iminopyrrolyl)‐phenyl]BPh₂ ( 11 ), Ph₂B[4,4′‐bis(iminopyrrolyl)‐biphenyl]BPh₂ ( 12 ), Ph₂B[1,5‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 13 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐naphthyl]BPh₂ ( 14 ), Ph₂B[2,6‐bis(iminopyrrolyl)‐anthracenyl]BPh₂ ( 15 )) and the star‐shaped triboron complex ([4′,4′′,4′′′‐tris(iminopyrrolyl)‐1,3,5‐triphenylbenzene](BPh₂)₃ ( 16 )) were obtained in moderate to good yields, by the treatment of 3 – 9 with B(C₆H₅)₃. The ligand precursors are non‐emissive, whereas most of their boron complexes are highly fluorescent; their emission color depends on the π‐conjugation length. The photophysical properties of the luminescent polyboron compounds were measured, showing good solution fluorescence quantum yields ranging from 0.15 to 0.69. DFT and time‐dependent DFT calculations confirmed that molecules 10 and 16 are blue emitters, because only one of the iminopyrrolyl groups becomes planar in the singlet excited state, whereas the second (and third) keeps the same geometry. Compound 13 , in which planarity is not achieved in any of the groups, is poorly emissive. In the other examples ( 11 , 12 , 14 , and 15 ), the LUMO is stabilized, narrowing the gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital (HOMO–LUMO), and the two iminopyrrolyl groups become planar, extending the size of the π‐system, to afford green to yellow emissions. Organic light‐emitting diodes (OLEDs) were fabricated by using the new polyboron complexes and their luminance was found to be in the order of 2400 cd m^?2, for single layer devices, increasing to 4400 cd m^?2 when a hole‐transporting layer is used.     

Sensitive and Multiplexed On‐chip microRNA Profiling in Oil‐Isolated Hydrogel Chambers

Although microRNAs (miRNAs) have been shown to be excellent indicators of disease state, current profiling platforms are insufficient for clinical translation. Here, we demonstrate a versatile hydrogel‐based microfluidic approach and novel amplification scheme for entirely on‐chip, sensitive, and highly specific miRNA detection without the risk of sequence bias. A simulation‐driven approach is used to engineer the hydrogel geometry and the gel‐reaction environment is chemically optimized for robust detection performance. The assay provides 22.6 fM sensitivity over a three log range, demonstrates multiplexing across at least four targets, and requires just 10.3 ng of total RNA input in a 2 hour and 15 minutes assay.     

Interface Engineering of a CoOx/Ta3N5 Photocatalyst for Unprecedented Water Oxidation Performance under Visible‐Light‐Irradiation

Cocatalysts have been extensively used to promote water oxidation efficiency in solar‐to‐chemical energy conversion, but the influence of interface compatibility between semiconductor and cocatalyst has been rarely addressed. Here we demonstrate a feasible strategy of interface wettability modification to enhance water oxidation efficiency of the state‐of‐the‐art CoO_x/Ta₃N₅ system. When the hydrophobic feature of a Ta₃N₅ semiconductor was modulated to a hydrophilic one by in situ or ex situ surface coating with a magnesia nanolayer (2–5 nm), the interfacial contact between the hydrophilic CoO_x cocatalyst and the modified hydrophilic Ta₃N₅ semiconductor was greatly improved. Consequently, the visible‐light‐driven photocatalytic oxygen evolution rate of the resulting CoO_x/MgO(in)–Ta₃N₅ photocatalyst is ca. 23 times that of the pristine Ta₃N₅ sample, with a new record (11.3 %) of apparent quantum efficiency (AQE) under 500–600 nm illumination.     

Synthesis and Characterization of 2‐Pyridylsulfur Pentafluorides

Current approaches to prepare SF₅‐substituted heterocycles during the synthesis of targeted heterocyclic compounds require the use of SF₅‐functionalized aryl or alkyne reagents or SF₅Cl as a source of the SF₅ functional group. Herein we report that excess oxidative fluorination of 2,2′‐dipyridyl disulfide with a KF/Cl₂/MeCN system leads to the formation of thirteen new 2‐pyridylsulfur chlorotetrafluorides (2‐SF₄Cl‐pyridines). These molecules are found to undergo further chlorine–fluorine exchange reactions by treatment with silver(I) fluoride enabling ready access to a series of ten new substituted 2‐pyridylsulfur pentafluorides (2‐SF₅‐pyridines). This is the first preparatively simple and readily scalable example of the transformation of an existing heterocyclic sulfur functionality to prepare SF₅‐substituted heterocycles.     

Tuning the Reactivity of Isocyano Group: Synthesis of Imidazoles and Imidazoliums from Propargylamines and Isonitriles in the Presence of Multiple Catalysts

The reaction of propargyl amines with tert‐butylisonitrile in the presence of a catalytic amount of both Yb(OTf)₃ and AgOTf afforded imidazoles, whereas the same reaction with primary and secondary alkylisonitriles, as well as arylisonitriles, in the presence of three metal salts [Yb(OTf)₃/AgOTf/KOTf] resulted in the 1,3,4,5‐tetrasubstituted imidazoliums in excellent yields. Both chiral amines and chiral isonitriles can be used to provide corresponding chiral heterocycles without racemization. In this multiple catalytic system, Yb(OTf)₃ catalyzed the insertion of isonitriles to the N? H bond of amines, AgOTf catalyzed the 5‐exo‐dig cyclization of the resulting amidine nitrogen to the tethered triple bond, and KOTf promoted the salt metathesis, thus providing at the same time the counterion to the imidazolium. Against common knowledge, the isocyano group acted in these reactions as a polarized triple bond instead of conventional carbene‐like function.     

A General and Mild Catalytic α‐Alkylation of Unactivated Esters Using Alcohols

Catalytic α‐alkylation of esters with primary alcohols is a desirable process because it uses low‐toxicity agents and generates water as the by‐product. Reported herein is a NCP pincer/Ir catalyst which is highly efficient for α‐alkylation of a broad scope of unactivated esters under mild reaction conditions. For the first time, alcohols alkylate unactivated α‐substituted acyclic esters, lactones, and even methyl and ethyl acetates. This method can be applied to the synthesis of carboxylic acid derivatives with diverse structures and functional groups, some of which would be impossible to access by conventional enolate alkylations with alkyl halides.     

Ba3P5N10Br:Eu2+: A Natural‐White‐Light Single Emitter with a Zeolite Structure Type

Illumination sources based on phosphor‐converted light emitting diode (pcLED) technology are nowadays of great relevance. In particular, illumination‐grade pcLEDs are attracting increasing attention. Regarding this, the application of a single warm‐white‐emitting phosphor could be of great advantage. Herein, we report the synthesis of a novel nitridophosphate zeolite Ba₃P₅N₁₀Br:Eu²⁺. Upon excitation by near‐UV light, natural‐white‐light luminescence was detected. The synthesis of Ba₃P₅N₁₀Br:Eu²⁺ was carried out using the multianvil technique. The crystal structure of Ba₃P₅N₁₀Br:Eu²⁺ was solved and refined by single‐crystal X‐ray diffraction analysis and confirmed by Rietveld refinement and FTIR spectroscopy. Furthermore, spectroscopic luminescence measurements were performed. Through the synthesis of Ba₃P₅N₁₀Br:Eu²⁺, we have shown the great potential of nitridophosphate zeolites to serve as high‐performance luminescence materials.     

Access to Nitriles from Aldehydes Mediated by an Oxoammonium Salt

A scalable, high yielding, rapid route to access an array of nitriles from aldehydes mediated by an oxoammonium salt (4‐acetylamino‐2,2,6,6‐tetramethylpiperidine‐1‐oxoammonium tetrafluoroborate) and hexamethyldisilazane (HMDS) as an ammonia surrogate has been developed. The reaction likely involves two distinct chemical transformations: reversible silyl‐imine formation between HMDS and an aldehyde, followed by oxidation mediated by the oxoammonium salt and desilylation to furnish a nitrile. The spent oxidant can be easily recovered and used to regenerate the oxoammonium salt oxidant.     

On the Role of the Electronic Structure of the Heteronuclear Oxide Cluster [Ga2Mg2O5].+ in the Thermal Activation of Methane and Ethane: An Unusual Doping Effect

The reactivity of the heteronuclear oxide cluster [Ga₂Mg₂O₅]^.+, bearing an unpaired electron at a bridging oxygen atom (O_b^.?), towards methane and ethane has been studied using Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR‐MS). Hydrogen‐atom transfer (HAT) from both methane and ethane to the cluster ion is identified experimentally. The reaction mechanisms of these reactions are elucidated by state‐of‐the‐art quantum chemical calculations. The roles of spin density and charge distributions in HAT processes, as revealed by theory, not only deepen our mechanistic understanding of C? H bond activation but also provide important guidance for the rational design of catalysts by pointing to the particular role of doping effects.     

Depolymerization of Free‐Radical Polymers with Spin Migrations

The mechanism of depolymerization is one of the most essential issues in chemical engineering and materials science. In this work, we investigate the depolymerization reactions of three typical free‐radical poly(alpha‐methylstyrene) tetramers by using first‐principles density functional theory. The calculated results show that these reactions all need to overcome the energy barriers in the range of 0.58 to 0.77 eV, and that breaking the C?C bond at the chain end leads to the dissociation of alpha‐methylstyrene monomers from the polymers. Electronic‐structure analysis indicates that the reactions occur easily at the CR₃ unsaturated end, and that the frontier molecular orbitals that participate in the reactions are mainly localized at the unsaturated ends. Meanwhile, spin population analysis presents the unique net spin‐transfer process in free‐radical depolymerization reactions. We hope the current findings can contribute to understanding the free‐radical depolymerization mechanism and help guide future experiments.