Recent advances in the asymmetric catalytic synthesis of chiral 3-hydroxy and 3-aminooxindoles and derivatives: Medicinally relevant compounds

Several oxindole derivatives, of natural or synthetic origin, have been identified as medicinally appealing compounds, with a plethora of bioactivities reported. Chiral 3-hydroxy and 3-aminooxindole scaffolds have captured the attention of several research groups, due to their importance in drug discovery. In this review, we systematically address the wide variety of asymmetric catalytic methodologies employed in the preparation of these relevant chiral scaffolds, present in many biologically active compounds and/or natural products. Special focus will be given to the nature of the catalyst used.     

Assessment of pharmacokinetic interaction between piracetam and l‐carnitine in healthy subjects

A rapid, sensitive and specific method for quantifying piracetam in human plasma using Piracetam d‐8 as the internal standard (IS) is described. The analyte and the IS were extracted from plasma by one‐step precipitation of protein using an acetonitrile (100%). The extracts were analyzed by high‐performance liquid chromatography coupled with electrospray tandem mass spectrometry (HPLC‐MS/MS). The method had a chromatographic run time of 3.8 min and a linear calibration curve over the range 0.5–50 µg/mL (r > 0.99). This LC‐MS‐MS procedure was used to assess the bioavailability of two piracetam formulations: piracetam + l‐carnitine (Piracar®; 270/330 mg tablet) and piracetam (Nootropil®; 800 mg tablet) in healthy volunteers of both sexes. The geometric means with corresponding 90% confidence interval (CI) for test/reference percentage ratios were 88.49% (90% CI = 81.19 – 96.46) for peak concentration/dose and 102.55% (90% CI = 100.62 – 104.51) for AUC_inf/dose. The limit of quantitation of 0.5 µg/mL is well suited for pharmacokinetic studies in healthy volunteers. It was concluded that piracetam (Piracar®; 270/330 mg tablet) has a bioavailability equivalent to the piracetam (Nootropil®; 800 mg tablet) formulation with regard to both the rate and the extent of absorption. Copyright © 2015 John Wiley & Sons, Ltd.     

Simultaneous Determination of Nickel and Cobalt Using a Solid Bismuth Vibrating Electrode by Adsorptive Cathodic Stripping Voltammetry

A simple, fast, sensitive and greener voltammetric procedure for simultaneous analysis of nickel (Ni) and cobalt (Co) by square wave adsorptive cathodic stripping voltammetry (SW‐AdCSV) using a solid bismuth vibrating electrode is presented for the first time. The procedure enables to determine Ni together with Co, in ammonia buffer 0.1 M (pH 9.2) and in the presence of oxygen, and involves an adsorptive accumulation of metal‐dimethylglyoxime (Ni‐DMG and Co‐DMG) complexes on the electrode surface. For Ni and Co, the detection limits, obtained with 30 s of accumulation time, were 0.6 and 1.0 µg L^?1, respectively. The method was free of metals (Cd²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Fe³⁺ and Pb²⁺ up to 50 µg L^?1, Al³⁺ and Mn²⁺ up to 500 µg L^?1; Zn²⁺ up to 300 µg L^?1) interferences up to the concentrations mentioned in brackets. The proposed method was validated for simultaneous determination of Ni and Co in a certified reference surface and river waters with good results.     

Simultaneous Anodic Stripping Voltammetric Determination of Pb and Cd,Using a Vibrating Gold Microwire Electrode,Assisted by Chemometric Techniques

Simultaneous anodic stripping voltammetric determination of Pb and Cd is restricted on gold electrodes as a result of the overlapping of these two peaks. This work describes the quantitative determination of a binary mixture system of Pb and Cd, at low concentration levels (up to 15.0 and 10.0 µg L^?1 for Pb and Cd, respectively) by differential pulse anodic stripping voltammetry (DPASV; deposition time of 30 s), using a green electrode (vibrating gold microwire electrode) without purging in a chloride medium (0.5 M NaCl) under moderate acidic conditions (HCl 1.0 mM), assisted by chemometric tools. The application of multivariate curve resolution alternating least squares (MCR‐ALS) for the resolution and quantification of both metals is shown. The optimized MCR‐ALS models showed good prediction ability with concentration prediction errors of 12.4 and 11.4 % for Pb and Cd, respectively. The quantitative results obtained by MCR‐ALS were compared to those obtained with partial least squares (PLS) and classical least squares (CLS) regression methods. For both metals, PLS and MCR‐ALS results are comparable and superior to CLS. For Cd, as a result of the peak shift problem, the application of CLS was unsuitable. MCR‐ALS provides additional advantage compared to PLS since it estimates the pure response of the analytes signal. Finally, the built up multivariate calibration models, based either in MCR‐ALS or PLS regression, allowed to quantify concentrations of Pb and Cd in surface river water samples, with satisfactory results.     

Development and validation studies for determination of phenylpropanoid‐substituted flavan‐3‐ols in semipurified extract of Trichilia catigua by high‐performance liquid chromatography with photodiode array detection

The phenolic compounds are the main phytochemical constituents of the bark of Trichilia catigua and are commonly used for medicinal purposes. An HPLC method for the simultaneous quantification of phenolic compounds (procyanidin B2 (PB2), epicatechin (EPC), chinchonains Ia, Ib, IIa, IIb, catechin, and chrologenic acid) in T. catigua extract was developed and validated. A suitable chromatographic system was selected, which uses a gradient elution with methanol/ACN (75:25), and water both with 0.05% TFA, as mobile phase, column Luna, 280 nm, and flow 0.4 mL/min. Validation of the analytical method was based on the parameters: linearity, precision, LODs and LOQs, accuracy, robustness, and stability. The method showed linearity for PB2 and EPC, in the range 10–120 μg/mL with good correlation coefficients (>0.996). For precision, the repeatability ranged from 1.89 to 3.23%, and the values for accuracy for PB2 and EPC were 95 and 89%, respectively. The LODs and LOQs for PB2 were 1.36 and 4.12 μg/mL, and for EPC were 2.18 and 6.61 μg/mL, respectively. The method was robust under the conditions employed. The proposed method could be employed for quality assessment of T. catigua, as well as pharmaceutical products.     

Performance of hydrophobic interaction ligands for human membrane‐bound catechol‐O‐methyltransferase purification

Despite of membrane catechol‐O‐methyltransferase (MBCOMT, EC 2.1.1.6) physiological importance on catecholamines’ O‐methylation, no studies allowed their total isolation. Therefore, for the first time, we compare the performance of three hydrophobic adsorbents (butyl‐, epoxy‐, and octyl‐Sepharose) in purification of recombinant human COMT (hMBCOMT) from crude Brevibacillus choshinensis cell lysates to develop a sustainable chromatographic process. Hydrophobic matrices were evaluated in terms of selectivity and hMBCOMT's binding and elution conditions. Results show that hMBCOMT's adsorption was promoted on octyl and butyl at ≤375 mM NaH₂PO_4, while on epoxy higher concentrations (>850 mM) were required. Additionally, hMBCOMT's elution was promoted on epoxy, butyl, and octyl using respectively 0.1–0.5, 0.25–1, and 1% of Triton X‐100. On butyl media, a stepwise strategy using 375 and 0 mM NaH₂PO₄, followed by three elution steps at 0.25, 0.7 and 1% Triton X‐100, allowed selective hMBCOMT isolation. In conclusion, significant amounts of MBCOMT were purified with high selectivity on a single chromatography procedure, despite its elution occurs on multiple peaks. Although successful applications of hydrophobic interaction chromatography in purification of membrane proteins are uncommon, we proved that traditional hydrophobic matrices can open a promising unexplored field to fulfill specific requirements for kinetic and pharmacological trials.