Synthesis of ordered ZnO nanowire arrays from aqueous solution using AAO template

In this paper we report a simple method that enables the easy fabrication of ordered ZnO nanowire arrays using Anodic Aluminium Oxide (AAO) template. We have used a vacuum injection technique to fill solution into the pores of an AAO template. The AAO template has been fabricated by a two-step anodization process using 0.3 M oxalic acid (H₂C₂O₄) solution under a constant voltage of 40 V. The AAO template formed through this process has been detached from Al substrate via an anodic voltage pulse using perchloric acid (HClO₄) solution (70%). The nanowires of ZnO have been synthesized by injecting the saturated Zn(NO₃)₂ solution into the pores of the detached AAO template using a vacuum pump. The ZnO nanowires synthesized by this technique have been found dense & continuous with uniform diameter throughout the length of the wire. The structural characteristics of AAO template and ZnO nanowires have been studied by Field Emission Scanning Electron Microscope (FESEM), Atomic force microscope (AFM) and Transmission Electron Microscope (TEM).     

The impact of ultra thin silicon nitride buffer layer on GaN growth on Si (1 1 1) by RF-MBE

Ultra thin films of pure silicon nitride were grown on a Si (1 1 1) surface by exposing the surface to radio-frequency (RF) nitrogen plasma with a high content of nitrogen atoms. The effect of annealing of silicon nitride surface was investigated with core-level photoelectron spectroscopy. The Si 2p photoelectron spectra reveals a characteristic series of components for the Si species, not only in stoichiometric Si₃N₄ (Si⁴⁺) but also in the intermediate nitridation states with one (Si¹⁺) or three (Si³⁺) nitrogen nearest neighbors. The Si 2p core-level shifts for the Si¹⁺, Si³⁺, and Si⁴⁺ components are determined to be 0.64, 2.20, and 3.05 eV, respectively. In annealed sample it has been observed that the Si⁴⁺ component in the Si 2p spectra is significantly improved, which clearly indicates the crystalline nature of silicon nitride. The high resolution X-ray diffraction (HRXRD), scanning electron microscopy (SEM) and photoluminescence (PL) studies showed a significant improvement of the crystalline qualities and enhancement of the optical properties of GaN grown on the stoichiometric Si₃N₄ by molecular beam epitaxy (MBE).     

NIR to visible upconversion in Er/Yb co-doped CaYAl3O7 phosphor obtained by solution combustion process

Using the combustion synthesis, CaYAl₃O₇:Er³⁺ phosphor powders co-doped with Yb³⁺ have been prepared at low temperatures (550 °C) in a few minutes. Formation of the compound was confirmed by X-ray powder diffraction. Near-infrared to visible upconversion fluorescence emission in the Er³⁺ doped CaYAl₃O₇ phosphor powder has been observed. The effect of co-doping with triply ionized ytterbium in the CaYAl₃O₇:Er³⁺ phosphor has been studied and the process involved is discussed.     

Effect of annealing on structural and electrical properties of the Li–Mn–O thin films, prepared by high frequency RF magnetron sputtering

Li–Mn–O thin film cathode materials are prepared by high frequency (27.12 MHz) RF magnetron sputtering. The high RF frequency gives higher deposition rates without compromising on the quality of the films. This investigation focuses on the effects of post-annealing on the micro-structural, morphological and electrical properties of Li–Mn–O films. It is observed that with the increase of annealing temperature the crystallinity as well as the electrical conductivity of the films increases. The films annealed at 600–700 °C are found to have high structural perfection and good electrical properties.     

Designing of endlessly single mode polarization maintaining highly birefringent nonlinear micro-structure fiber at telecommunication window by FV-FEM

An endlessly single mode highly polarization maintaining nonlinear microstructure fiber at telecommunication window is reported via full-vector finite element method. By taking three ring hexagonal PCF with suitable fiber parameter such as air hole diameter in cladding region d = 0.8 μm, pitch 2.3 μm and introducing four symmetrical large air holes near core region d′ = 2 μm, single mode (V_eff ≤ π), small effective mode area 2.7 μm², nonlinear co-efficient 44.39 W⁻¹ km⁻¹, high phase birefringence of the order of 10⁻³ and group birefringence of the order of 10⁻⁴ with beat length 0.3 μm at wavelength 1.55 μm are achieved.     

Multiple Quantum Well in static magnetic field and intense laser pulses

The energy spectrum and dipole matrix elements of a multiple quantum well (MQW) system has been calculated numerically by solving the time-independent Schrödinger equation using finite difference method, in the presence of magnetic field. The effect of barrier width is also investigated. The energy difference between the levels of various minibands and the energy difference between various levels of the same miniband is calculated for different number of wells in the MQW. Finally, the dynamics of the system in short laser pulses has been calculated numerically by solving the time-dependent Schrödinger equation. The effect of magnetic field on the dynamics is clearly shown and explained.     

Multimodal approach for diagnosis of bacterial etiology in brain abscess

Background and purpose

Proton magnetic resonance spectroscopy (PMRS) has high sensitivity and specificity for the detection of pyogenic brain abscess and the categorization of bacteria. But the metabolite patterns failed to evaluate the etiology of disease when the culture results are sterile. The aim of the present study is to compare the multimodality techniques viz., conventional culture, MR spectroscopy and 16S rRNA PCR and sequencing for rapid diagnosis of etiology in brain abscess and evaluate the PMRS in culture sterile samples and also demonstrate the sensitivity and specificity of these techniques.

Methods

Thirty five patients underwent MRI on a 3 T MRI and in-vivo PMRS for the diagnosis and evaluation of various resonances of metabolites such as lipid (LIP), lactate (LAC), acetate (AC), amino acid (AC), succinate (SUC). Pus was collected for identification of etiologic agents by culture and molecular method.

Results

In 35 samples, metabolite patterns were as follows: LIP/LAC/AA, n = 17, LIP/LAC/AA/SUC with or without AC, n = 17 and LIP/LAC/AA/AC, n = 1. Culture showed bacterial growth in 22 samples (18 aerobic/facultative anaerobic, 9 anaerobic) whereas molecular method was detected 26 aerobic/facultative anaerobic, 13 anaerobic, 4 microaerophilic bacteria. Among the 13 sterile samples, molecular method detected 16 microorganisms along with 3 mixed infections and PMRS recognized metabolite patterns as LIP/LAC/AA, n = 5 and LIP/LAC/AA/SUC with or without AC, n = 8. The sensitivity of in-vivo PMRS in sterile samples was 100% and 75%, and specificity was 75% and 100% for aerobic and anaerobic organisms respectively.

Conclusion

Based on metabolite resonances, PMRS can detect slow growing and fastidious organisms and classify them into aerobic and anaerobic bacteria which are difficult to culture by conventional method. It can categorize microorganisms even in culture sterile samples with rational sensitivity and specificity which may allow early choice of targeted therapy.     

Optical and electrical studies of as-prepared and annealed Se-Te-Bi thin films

The effect of thermal annealing on the electrical and optical properties of a thin film of Se-Te-Bi alloy has been studied. It has been found that the mechanism of optical absorption follows a non-direct transition. The optical band-gap decreases with an increase in the Bismuth concentration. The electrical conductivity of the as-deposited and annealed films has been found to be of Arrhenius type. The results are discussed on the basis of rearrangements of defects and disorders in the chalcogenide systems. PACS 71.23.An; 73.61.-r; 73.61Jc; 74.25Gz; 78.66Jg     

Influence of small DC bias field on the electrical behaviour of Sr- and Mg-doped lanthanum gallate

One of the promising electrolyte materials for solid oxide fuel cells application, Sr- and Mg-doped lanthanum gallate La_0.9Sr_0.1Ga_0.8Mg_0.2O_3-δ (LSGM), is synthesized by conventional solid state ceramic route. X-ray Rietveld analysis confirms the formation of main orthorhombic phase at room temperature along with a few minor secondary phases. SEM micrograph reveals the grain and grainboundary morphology of the system. Electrical conductivity of the LSGM sample is measured in the temperature range 573–873 K and in the frequency range 20 Hz–1 MHz at a few small DC bias fields (at 0.0, 0.5, 1.0, 1.5 and 2.0 V). The conductivity spectra show power-law behaviour. Electrical conductivity of the sample is found to be weakly dependent on DC bias field. This is attributed to field-dependent bulk and grainboundary conduction processes. In the present system, under investigated bias field range, the possibility of formation of Schottky barrier is ruled out. The concept of grainboundary channel (pathway) modulation on the application of bias field is proposed.     

Synthesis and characterization of Ni-Zn ferrite nanoparticles

Nickel zinc ferrite nanoparticles Ni_xZn_1−xFe₂O₄ (x=0.1, 0.3, 0.5) have been synthesized by a chemical co-precipitation method. The samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, electron paramagnetic resonance, dc magnetization and ac susceptibility measurements. The X-ray diffraction patterns confirm the synthesis of single crystalline Ni_xZn_1−xFe₂O₄ nanoparticles. The lattice parameter decreases with increase in Ni content resulting in a reduction in lattice strain. Similarly crystallite size increases with the concentration of Ni. The magnetic measurements show the superparamagnetic nature of the samples for x=0.1 and 0.3 whereas for x=0.5 the material is ferromagnetic. The saturation magnetization is 23.95 emu/g and increases with increase in Ni content. The superparamagnetic nature of the samples is supported by the EPR and ac susceptibility measurement studies. The blocking temperature increases with Ni concentration. The increase in blocking temperature is explained by the redistribution of the cations on tetrahedral (A) and octahedral (B) sites.