Molecularly imprinted polymer-based solid-phase extraction combined with molecularly imprinted polymer-based sensor for detection of uric acid

The development of an easy-to-use, rapid, robust and inexpensive technique is required which can measure the basal concentration of uric acid (UA) lower than 1.0 x 10(-7)M ( approximately 0.017 mgL(-1)) in biological samples to attend the problem of hypouricemia. In the present work an artificial receptor for UA, silica gel-bonded molecularly imprinted polymer (MIP), was used as a sorbent for molecularly imprinted solid-phase extraction (MISPE) in column chromatography. The use of a sensor based on a MIP-modified hanging mercury drop electrode (HMDE), as reported from our laboratory, could estimate UA with detection limit as low as 0.024 mgL(-1) under the optimized conditions of differential pulse, cathodic stripping voltammetric (DPCSV) measurement. However, in the current investigation, with the use of the combination of MISPE followed by detection with a MIP-based HMDE sensor, the minimum detectable concentration could go down to 0.0008 mgL(-1) (RSD=0.63%, S/N=3). The same MIP receptor for both MISPE and the corresponding sensor was able to enhance the preconcentration of analyte substantially so as to attain the desired level of sensitivity; and that to without any interference (cross-reactivity) from other structurally related analogues including the major interferent like ascorbic acid prevalent in the aqueous environment of biological samples.     

Engineering mono- and multi-valent inhibitors on a modular scaffold

Here we exploit the simple, ultra-stable, modular architecture of consensus-designed tetratricopeptide repeat proteins (CTPRs) to create a platform capable of displaying both single as well as multiple functions and with diverse programmable geometrical arrangements by grafting non-helical short linear binding motifs (SLiMs) onto the loops between adjacent repeats. As proof of concept, we built synthetic CTPRs to bind and inhibit the human tankyrase proteins (hTNKS), which play a key role in Wnt signaling and are upregulated in cancer. A series of mono-valent and multi-valent hTNKS binders was assembled. To fully exploit the modular scaffold and to further diversify the multi-valent geometry, we engineered the binding modules with two different formats, one monomeric and the other trimeric. We show that the designed proteins are stable, correctly folded and capable of binding to and inhibiting the cellular activity of hTNKS leading to downregulation of the Wnt pathway. Multivalency in both the CTPR protein arrays and the hTNKS target results in the formation of large macromolecular assemblies, which can be visualized both in vitro and in the cell. When delivered into the cell by nanoparticle encapsulation, the multivalent CTPR proteins displayed exceptional activity. They are able to inhibit Wnt signaling where small molecule inhibitors have failed to date. Our results point to the tremendous potential of the CTPR platform to exploit a range of SLiMs and assemble synthetic binding molecules with built-in multivalent capabilities and precise, pre-programmed geometries.     

A brief review on miniaturized electrochemiluminescence devices: From fabrication to applications

Miniaturized electrochemiluminescence (ECL) systems are widely recognized as a highly detection, user-friendly, and turnkey strategy to develop point-of-care-testing devices. The ECL sensing approach provides numerous advantages over other methods, including high signal-to-noise ratio and measurement with minimal or no background signal. The ECL signal can be easily controlled by a small external potential while providing high sensitivity and decreased electrode fouling, resulting in the use of ECL-based miniaturized systems for detection and monitoring of different analytes, including DNA and bacteria. In this work, different types of miniaturized ECL systems with various fabrication techniques are reviewed and their application in point-of-care-testing is thoroughly discussed. Furthermore, such ECL platforms have been summarized based on the type of the ECL mechanism, electrodes, range of detection, and limit of detection. Finally, some of the upcoming technological interventions to make such a miniaturized ECL platform amenable for portable and on-field analysis have been discussed.     

Experimental studies on droplet characteristics in a microfluidic flow focusing droplet generator: effect of continuous phase on droplet encapsulation

The European Physical Journal E - Interaction of cytoskeletal filaments, motor proteins, and crosslinking proteins drives important cellular processes such as cell division and cell movement....     

Dielectric and electrical properties of a tungsten bronze tantalate ceramic

Using high temperature solid state reaction the polycrystalline sample of K₂Pb₂Dy₂W₂Ti₄Ta₄O₃₀ was prepared. Single-phase compound formation was confirmed by preliminary X-ray structural analysis. The surface morphology recorded by scanning electron microscope at room temperature exhibits a dense uniform grain distribution on the surface of the sample. Ferroelectricity in the material is confirmed by the variation of polarization with temperature. The temperature and frequency dependence of electrical parameters (impedance, modulus, conductivity, etc.) of the material exhibits a strong correlation with its microstructure (i.e., bulk, grain boundary, etc.) and electrical properties. A typical Arrhenius behavior was observed in the temperature dependence of dc conductivity. The nature of frequency dependence of ac conductivity obeys Jonscher's universal power law. The variation of current with temperature shows that the material has high pyroelectric coefficient and figure of merit, thus making it useful for pyroelectric sensors with working temperature upto 500 °C.     

A finite deformation nonlinear thermo-elastic model that mimics plasticity during monotonic loading

We present and study a nonlinear thermo-elastic constitutive model that under monotonic loading closely reproduces the response seen in plasticity, showing the initial stiff elastic response, kneeing as if yielding, and then showing response resembling post-yield hardening. The proposed large deformation thermo-elastic response model is constructed based on four physically identifiable mechanical parameters, that are closely related to the parameters used to construct plasticity models, thermal expansion parameters and two thermodynamic parameters. The four mechanical parameters are the initial elastic shear and bulk moduli, the yield point in shear, the hardening slope in shear. The thermodynamic parameters are the heat capacity at a reference temperature and its rate of change with changes of temperature. The model can be considered an alternate to deformation plasticity models currently used and, as such, can be used as a lightweight substitute for plasticity modeling in certain analysis. Since the proposed model is thermodynamically based, not only thermal effects are integrated into the model, but also the stress is calculated in terms of the applied deformation, allowing the model to be integrated with other models when conducting numerical analysis. We study the response of the proposed model under simple shear, uniaxial extension, confined compression, partially-confined compression, and biaxial extension. We incorporate the elastic model into ABAQUS using its UMAT subroutine for solid elements and using UHYPER for shell elements. We compare the large deformation response from the proposed elastic model with J2-plasticity, and with plasticity and deformation plasticity models implemented in ABAQUS. The model in most cases compares very favorably to all such models. This comparison is done for both homogeneous and non-homogeneous problems including the case of a cantilever beam under tip loading. We show that for the problems that it applies to, the models run in approximately one tenth the computational time and with one tenth the number of iterations needed to conduct the analysis using the plasticity model in ABAQUS.     

Self-assembly of C60, SWNTs and few-layer graphene and their binary composites at the organic-aqueous interface

Self-assembly of C(60), single-walled carbon nanotubes (SWNTs) and few-layer graphene at the toluene-water interface has been investigated, starting with different concentrations of the nanocarbons in the organic phase and carrying out the assembly to different extents. Morphologies and structures of the films formed at the interface have been investigated by electron microscopy and other techniques. In the case of C(60), the films exhibit hcp and fcc structures depending on the starting concentration in the organic phase, the films being single crystalline under certain conditions. Self-assembly of the composites formed by pairs of nanocarbons (C(60)-SWNT, C(60)-few-layer graphene and SWNT-few-layer graphene) at the interface has been studied by electron microscopy. Raman spectroscopy and electronic absorption spectroscopy of the films formed at the interface have revealed the occurrence of charge-transfer interaction between SWNTs and C(60) as well as between few-layer graphene and C(60).     

DNA interaction, superoxide scavenging and cytotoxicity studies on new copper(II) complexes derived from a tridentate ligand

The copper complexes [Cu(Pyimpy)(H₂O)](ClO₄)₂ (1), [Cu(Pyimpy)₂](ClO₄)₂ (2), [Cu(Pyimpy)(Cl)₂]·2H₂O (3·2H₂O), [Cu(Pyimpy)(N₃)(ClO₄)]₂ (4) and [Cu(Pyimpy)(SCN)(ClO₄)]₂ (5) were synthesized and characterized by spectroscopic techniques, crystal structures and electrochemical studies (Pyimpy: (2-((2-phenyl-2-(pyridin-2-l)hydrazono)methyl)pyridine)). The superoxide scavenging activity of the two water soluble complexes 1 and 3 was examined. DNA interaction studies by UV-Vis absorption spectral changes during a titration experiment indicated the generation of new species. These small molecule SOD mimics exhibited excellent DNA cleavage activity in the presence of H₂O₂ as well as 2-mercaptoethanol. Complexes 1-5 exhibited better cytotoxicity compared to CuCl₂·2H₂O and the ligand Pyimpy, and showed more potency than cisplatin for MCF-7, PC-3 and HEK-293 cells. Complex 3 exhibited the highest potency for MCF-7, PC-3 and HEK-293 cells compared to the other complexes.     

Synthesis and structural characterization of pincer type bicyclic diacyloxy- and diazaselenuranes

Synthesis and structural characterization of a new class of pincer type bicyclic diacyloxy- and diazaselenuranes is reported. The reaction of dimethyl 2-bromo-5-tert-butylisophthalate (28) with sodium benzeneselenolate affords the corresponding monoselenide, dimethyl 5-tert-butyl-2-(phenylselanyl)isophthalate (29). Reduction of 29 with LiAlH(4) provides 5-tert-butyl-2-(phenylselanyl)-1,3-phenylene)dimethanol 31. Oxidation of 29 or its hydrolyzed derivative, 5-tert-butyl-2-(phenylselanyl)isophthalic acid (30), with H(2)O(2) results in the formation of bicyclic diacyloxyselenurane (25). The reaction of 30 with aniline using the DCC coupling reaction gives 5-tert-butyl-N(1),N(3)-diphenyl-2-(phenylselanyl)isophthalamide (38). Reaction of 38 with H(2)O(2) leads to the formation of the corresponding bicyclic diazaselenurane (27) via selenoxide intermediate 39. Compounds 25, 27, 29 and 31 were characterized by single crystal X-ray crystallography. The structural aspects of the pincer type bicyclic chalcogenuranes are investigated using experimental and computational studies and compared with the related systems.