Stability of Ibuprofen in its Inclusion Complex with β-Cyclodextrin

The ibuprofen--cyclodextrin inclusion complex was prepared by theco-precipitation method. The identity of the obtained product was verified by X-ray and thermogravimetric techniques. The effect of -cyclodextrin on the stability of ibuprofen was analysed.     

Spectrum analysis of U-doped LaBr3 single crystals. Part 1: crystal-field analysis

Single crystals of U³⁺:LaBr₃ were grown by the Bridgman-Stockbarger technique. High-resolution polarized absorption spectra of the crystals were recorded at 4.2 K in the 4000-50,000 cm⁻¹ range. Sixty-four experimental crystal-field energy levels of the U³⁺ ion were fitted to a semiempirical Hamiltonian employing free-ion, one-electron crystal-field as well as two-particle correlation crystal-field (CCF) operators with an r.m.s. deviation of 28 cm⁻¹. The performed analysis of the spectra enabled the determination of crystal-field parameters and assignment of the observed 5f³→5f³ transitions. The effects of selected CCF operators on the splitting of some specific U³⁺ multiplets have been investigated and the obtained values of Hamiltonian parameters are discussed and compared with those reported in previous analyses.     

Electrospray mass spectrometry and tandem mass spectrometry of the natural mixture of cyclic peptides from linseed

The cyclic peptides from linseed are composed exclusively of the hydrophobic amino acids: Phe, Leu, Ile, Val, Met, Pro, and Trp. Because these compounds does not contain functional groups which undergo easily protonation or deprotonation. their ionization in solvents used usually for peptide analysis is not efficient. A rapid and sensitive procedure for detection and structure elucidation of the cyclic peptides based on ionization with Na+ and NH4+ ions. A cationisation of methionine containing peptides with methyl iodide has been also described. The extract of seeds of Linum utitatissimum was analyzed directly by ESI-MS and neutral loss ESI-MS/MS technique. The analysis confirms the presence of cyclolinopeptides reported previously: CLA (c(Pro-Pro-Phe-Phe-Leu-Ile-Ile-Leu-Val), and CLB (c(Pro-Pro-Phe-Phe-Val-Ile-Met-Ile-Leu)). Cyclolinopeptides CLC, CLD, CLE, and CLG, which contain methionine oxide, were detected in relatively small quantities. These peptides results likely from the oxidation of their not reported precursors: CLD' (c (Pro- Phe-Phe-Trp-Ile-Met-Leu-Leu)), CLE'(c (Pro-Leu-Phe-Ile-Met-Leu-Val-Phe)), CLF (c (Pro-Phe-Phe-Trp- Val-Met-Leu-Met), and CLG (c (Pro-Phe-Phe-Trp-Ile-Met-Leu-Met), present at higher concentrations in the extract protected from atmospheric oxygen. The sequences of the unreported cyclic peptides were proposed on the basis of CID experiments and homology with peptides described by Morita,1,2 and supported by the fragmentation of synthetic analogues of CLA of a known structure.     

Kinetics of self-condensation of acetone over heterogeneous Ba(OH)2 and Sr(OH)2 catalysts

Catalytic performance of Ba(OH)₂ and Sr(OH)₂ in self-condensation of acetone was examined in the temperature range from 273 to 303 K. A kinetic model of second order with respect to acetone was used for interpretation of the results obtained for the diacetone alcohol formation.This revised version was published online in December 2005 with corrections to the Cover Date.     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

Improvement of the Derjaguin-Broekhoff-de Boer theory for the capillary condensation/evaporation of nitrogen in spherical cavities and its application for the pore size analysis of silicas with ordered cagelike mesopores

In a previous work, we proposed an improvement of the Derjaguin-Broekhoff-de Boer (DBdB) theory for capillary condensation/evaporation in open-ended cylindrical mesopores. In this paper, we report a further extension of this approach to the capillary condensation/evaporation of nitrogen in siliceous spherical cavities. The main idea of this improvement is to employ the Gibbs-Tolman-Koenig-Buff equation to predict the variation of the surface tension in spherical mesopores. In addition, the statistical film thickness (the so-called t-curve), which is evaluated accurately on the basis of adsorption isotherms measured for MCM-41 materials, is used instead of the originally proposed t-curve to take into account the excess chemical potential due to the surface forces. It is shown that the aforementioned modifications of the original DBdB theory that was refined by Ravikovitch and Neimark have significant implications for the pore size analysis of cagelike mesoporous silicas. To verify the proposed improvement of the DBdB pore size analysis (IDBdB), two series of FDU-1 samples, which are well-defined cagelike mesoporous materials (composed of siliceous spherical cavities interconnected by short necks), were used for the evaluation of the pore size distributions (PSDs). The correlation between the spinodal condensation point in the spherical pores predicted by the nonlocal density functional theory (NDFT) developed by Ravikovitch and Neimark and that predicted by the IDBdB theory is very good in the whole range of mesopores. This feature is mirrored to the realistic PSD characterized by the bimodal structure of pores computed from the IDBdB theory. As in the case of open-ended cylindrical pores, the improvement of the classical DBdB theory preserves its simplicity and simultaneously ensures a significant improvement of the pore size analysis, which is confirmed by the independent estimation of the average pore size by the NDFT and the powder X-ray diffraction method.     

Formal Mathematical Analysis of the Existence of the Common Intersection Point in Relation to Determining the Parameters Describing Ion Adsorption at the Oxide/Electrolyte Interface: Comparison of the Triple and Four-Layer Models

For most oxide/electrolyte systems potentiometric titration curves measured for different ionic strengths have a Common Intersection Point (CIP) which corresponds to the Point of Zero Charge (PZC). However, there are systems where a CIP exists but the surface charge at this point does not equal zero (PZC CIP). In this paper theoretical analysis of the systems in which the PZC and CIP do not coincide is presented. It is based on the well-known 2-pK surface charging approach and Triple Layer Model (TLM) as well as the Four Layer Model (FLM) of the electric double layer. The appropriate mathematical criterion for CIP existence was applied with detailed derivations, both for TLM and FLM. Having determined in this manner the parameter values, one can draw proper conclusions about the features of oxide/electrolyte adsorption systems, in which PZC and CIP do not coincide. The values of adsorption parameters are found by fitting simultaneously the obtained theoretical expressions to both of the experimental titration isotherms, and to the individual isotherms of electrolyte cation adsorption measured using radiometric methods.     

Solvent-mediated folding of a doubly charged anion

The microsolvation of the suberate dianion, -O2C(CH2)6CO2-, with two separate charge centers was studied by photoelectron spectroscopy and molecular dynamics simulation one solvent molecule at a time for up to 20 waters. It is shown that the two negative charges are solvated in the linear suberate alternately. As the solvent number increases, the negative charges are screened and a conformation change occurs at 16 waters, where the cooperative hydrogen bonding of water is large enough to overcome the Coulomb repulsion and pull the two negative charges closer through a water bridge. This conformation change, revealed both from the experiment and from the simulation, is a manifestation of the hydrophilic and hydrophobic forces at the molecular level.     

Mimicking photosynthesis in a computationally designed synthetic metalloprotein

While advances in protein design have made possible the construction of protein architectures with nativelike properties and predictable structures and function, there are as of yet no examples of functional, protein-based, solar energy conversion systems. This communication describes the design and characterization of an artificial reaction center (RC) protein that closely resembles the function of the natural photosynthetic RC. The synthetic protein, designed by the protein design program CORE, participates in multiple reduction/oxidation cycles with exogenous acceptors/donors following photoexcitation. The designed metalloprotein, aRC, consists of a tetrahelical bundle functionalized with two bis-histidine bound metal cofactors: a Ru(bpy)2 moiety and a heme group. Two distinct bis-histidine binding sites were engineered for each of these metal centers. Photoexcitation of aRC results in rapid ET from the RuII complex to the heme group (kET >/= 5 x 1010 s-1) yielding a long-lived (70 ns) charge-separated state (CSS), RuIII/FeII. This long-lived CSS participates in subsequent ET reactions with exogenous donors and acceptors in multiple photocycles, thus mimicking the basic function of native photosynthetic RCs. This study illustrates the successful design and construction of a protein-based functional charge separation device using a combination of automated computational protein design and knowledge of the engineering principles of biological electron tunneling extracted from natural electron-transfer systems. To our knowledge, this represents the first example of a functional protein-based artificial reaction center.     

Direct Clay-Catalyzed Friedel-Crafts Arylation and Chlorination of the Hydrocarbon Adamantane

Multiple chlorinations and arylations at the tertiary positions of adamantane are promoted by FeCl₃-doped K10 montmorillonite in CCl₄ or in aromatic solvents. The process, remarkably easy to implement, can be tailored to selective formation of monosubstituted 1-adamantyl derivatives or 1,3-disubstituted adamantanes. The process achieves alkylation at the meta- and para-positions of toluene leading to a purely statistical distribution and displays no substrate specificity in competition experiments between toluene and benzene.