Interactions between cellulose nanofibers and retention systems in flocculation of recycled fibers

Although the positive effect that cellulose nanofibers (CNF) can have on paper strength is known, their effect on flocculation during papermaking is not well understood, and most relevant studies have been carried out in presence of only cationic starch. Flocculation is the key to ensuring retention of fibers, fines, and fillers, and furthermore floc properties have a great influence on paper quality. The aim of this research is to study the interactions between CNF and flocculants by assessing the effect of two types of CNF, from eucalyptus and corn, on the flocculation process induced by three different retention systems [a dual system, polyvinylamine (PVA), and cationic starch as reference]. The results showed that CNF interacted with the flocculants in different ways, affecting flocculation efficiency and floc properties. In general, addition of CNF increased floc stability and minimized overdosing effects. Moreover, presence of CNF increased floc size for given PVA dose; therefore, CNF addition could contribute to improve the wet end in the paper machine if combined with the optimal flocculant and dose.     

Time-dependent internal Quantum Efficiency and diffusion Modulation Transfer Function of N/P photodiodes

The minority carrier continuity equation has been solved with the Green’s function approach in a N/P photodiode under the low-level injection assumption. The analytical solution obtained with this approach depends on the three spatial coordinates and on time. The diffusion and the collection of the excess minority carriers have been studied during the transitional period corresponding to very short integration times. The internal Quantum Efficiency and the diffusion Modulation Transfer Function have been calculated according to time. The simulations showed that they evolve with time until their steady-state values. When the integration time is very short, this evolution has to be taken into account for the estimation of the sensitivity of a photodiode and the contrast on an image of a sensor based on several adjacent N/P-type photodiodes.     

Fundamental problems of solid mechanics in high technologies

The paper provides an analytical review of some fundamental problems of solid mechanics in high technologies. The review relies partly on the invited report presented by the authors at the 10th All-Russian Congress on Theoretical and Applied Mechanics held in Nizhny Novgorod in 2011. Attention is focused on the problems involved in technologies of materials with a bulk fine-grained (nano) structure and in technologies used to control mechanical properties of surfaces and interfaces.     

Novel (R)-(+)-limonene-derived ligands: synthesis and application in asymmetric transfer hydrogenations

(R)-(+)-Limonene was transformed into mono-N-tosylated-1,2-diamine derivatives using an N-tosylaziridination procedure followed by sodium azide treatment and reduction on Pd/C. The ligands obtained proved effective in the asymmetric transfer hydrogenation protocol on aromatic ketones.     

Luminescent cellulose fibers activated by Eu3+-doped nanoparticles

UV- active cellulose fibers were obtained by dry-wet method spinning an 8?% by weight α-cellulose solution in N-methylomorpholine-N-oxide (NMMO) modified by europium-doped gadolinium oxyfluoride Gd₄O₃F₆:Eu³⁺ containing 5?mol (%) of the dopant. Photoluminescent nanoparticles were introduced in the in powder form into a polymer matrix during the process of cellulose dissolution in NMMO. The dependencies of emission intensity on excitation energy and the concentration of Gd₄O₃F₆:Eu³⁺ nanoparticles in the final cellulosic products were examined by photoluminescence spectroscopy (excitation and emission). The fiber structure was studied by X-ray powder diffraction analysis. The size and dispersity of the nanoparticles in the polymer matrix were evaluated using scanning electron microscopy and X-ray microanalysis. The influence of different concentration particles (in the range from 0.5 to 5?% by weight) on the mechanical properties of the fibers, such as tenacity and elongation at break, were determined.     

Structure and crystallization of sub-elementary fibrils of bacterial cellulose isolated by using a fluorescent brightening agent

The structure and crystallization of carefully isolated sub-elementary fibrils (SEFs) of bacterial cellulose have been investigated using TEM, WAXD, and high-resolution solid-state ¹³C NMR. The addition of a suitable amount of fluorescent brightener (FB) to the incubation medium of Acetobacter xylinum effectively suppressed the aggregation of the SEFs into the microfibrils, as previously reported. However, this study confirmed for the first time that serious structural change in the SEFs occurs during the removal of excess FB by washing with buffer solutions having pH values higher than 6 or with the alkaline aqueous solution that was frequently used in previous studies. In contrast, the isolation of unmodified SEFs was successfully performed by utilizing a washing protocol employing pH 7 citrate–phosphate buffer solution containing 1% sodium dodecyl sulfate. High-resolution solid-state ¹³C NMR and WAXD measurements revealed that the SEFs thus isolated are in the noncrystalline state in which the pyranose rings of the almost parallel cellulose chains appear to be stacked on each other. The respective CH₂OH groups of the SEFs adopt the gt conformation instead of the tg conformation found in cellulose I _α and I _β crystals, and undergo significantly enhanced molecular motion in the absence of intermolecular hydrogen bonding associated with these groups. The main chains are also subject to rapid motional fluctuations while maintaining the parallel orientation of the respective chains, indicating that the SEFs have a liquid crystal-like structure with high molecular mobility. Moreover, the SEFs crystallize into cellulose I _β when the FB molecules that may adhere to the surface of the SEFs are removed by extraction with boiling 70 v/v% ethanol and 0.1N NaOH aqueous solution. On the basis of these results, the crystallization of the SEFs into the I _α and I _β forms is discussed, including the possible formation of the crystalline-noncrystalline periodic structure in native cellulose.     

Critical re-investigation of the alditol acetate method for analysis of substituent distribution in methyl cellulose

The alditol acetate method is a common procedure for sugar analysis, also applied to determine the substituent distribution in monomer units of polysaccharide ethers like methyl cellulose by gas liquid chromatography. Consisting of several preparation and work-up steps this procedure is both time consuming and prone to side reactions that promote discrimination of single constituents, especially when no peralkylation step is performed prior to hydrolysis. As a consequence results scatter in dependence on individual treatment and conditions. In the context of this work these critical points were overcome by strict but simplified work-up procedures and using acid instead of alkaline catalyzed acetylation. Under the acidic conditions the tedious removal of borate is no longer necessary and a reduced time requirement was achieved as well as good reproducibility. Comparison with independent reference methods excluded a systematic error of the method and confirmed the results obtained. Without peralkylation, i.e. in the presence of free hydroxyl groups, another fast modification of the method using DMSO as solvent, no removal of borate, and 1-methylimidazole as catalyst for acetylation was found to produce a systematic error.     

The effect of drying method on the properties and nanoscale structure of cellulose whiskers

Cellulose whiskers were prepared from wood- and cotton-based microcrystalline cellulose and dried by two methods: freeze-drying or air-drying. The effect of drying method on the properties and structure of the whiskers were studied. Furthermore, the influence of the source of cellulose on the nanoscale structure was investigated. Drying method was observed to slightly influence the thermal stability of cellulose whiskers, whereas the char residue varied significantly depending on the drying process performed. Small- and wide-angle X-ray scattering and solid state nuclear magnetic resonance spectroscopy were used to examine the crystallinity and nanoscale structure of the dried whiskers. It was observed that the crystal structure and crystallinity of cellulose whiskers remained during all treatments, whereas their nanoscale structure was significantly influenced by drying method, neutralization, and source of cellulose. Relationships between thermal behavior and nanoscale structure were reported and discussed.