Deposition of Layer－by－layer Inorganic－organic Nano－hybrid Ultrathin Films onto SBA－15

Deposition of inorganic-organic nano-hybrid ultrathin films onto mesoporous silicate materials has been proven possible by using layer-by-layer assembly method. In combination with sol-gel method, titania, subsequently dye molecules (or polymer) were successfully fabricated onto the inner wall of SBA-15. Their structures were preliminarily characterized by FTIR and solid-state UV-Vis spectroscopy, thermal analysis, and BET surface area measurements,respectively.     

合成1，3－二（3－羟丙基）四甲基二硅氧烷的新方法

用二乙氧基二甲基硅烷与３－氯丙醇反应，合成了新化合物３－氯丙氧基乙氧基二甲基硅烷，然后用格氏反应代替Ｗａｌｔｅｒ的钠缩合反应，最后经水解制备了１，３－二（３－羟丙基）四甲基二硅氧烷，总收率为４２．０％。     

六甲氧基甲基三聚氰胺-多元醇-丙烯酸酯混杂聚合体系的研究

六甲氧基甲基三聚氰胺 (HMMM) 多元醇 丙烯酸酯 酸催化剂混杂聚合体系在高温下同时进行缩聚和自由基聚合并表现出协同效应 .体系中的活泼亚甲基在HMMM的催化下被空气氧化成过氧化氢物 ;过氧化氢物在酸催化下分解成自由基进而引发自由基聚合反应 .研究结果表明 ,体系中存在固化加速的协同效应 ;同时体系中还存在热互补效应 ,丙烯酸酯的自由基聚合反应放出的热可以传递给缩聚反应 ,满足缩聚反应吸热的要求 .混杂聚合得到的高分子合金膜具有优良的机械性能和耐溶剂性能 ,这是由于在混杂聚合过程中形成了互穿聚合物网络 (IPN)结构 .使用潜酸催化剂作为酸的来源 ,可以提高体系的储存稳定性 ;交联 引发剂的使用可以拓宽它的使用范围 ;对超枝化聚合物在混杂体系中的应用也进行了初步研究     

顺式-二(乙二胺)二硝基合钴(Ⅲ)苹果酸盐的晶体结构及手性识别

合成了标题化合物，并用X-射线衍射法确定了该分子的晶体结构。化合物Δ（λλ），Λ（δδ）－cis－[Co（en）2（NO2）2]2d，l-C4H4O5，Co2C12N12O13H22，Mr=657．94．晶体属单斜晶系，空间群为P21/c，晶胞参数：a=13．969（4），b=6.440（1），c＝14．408（4）A，β=94.37（1）°，V=1292．3A3，Z=2，Dc=1．69g／cm3，μ=105.833cm－1，F（000）=668.最终偏离因子R=0.066，Rw=0．085。结构分析表明晶体存在无序现象，其阴离子C4H4O52-有两种排列方式。R-构型和S-构型的几率各为50％，手性识别是通过Δ构型的阳离子与阴离子R-构型C原子上羟基氧形成氢键相互作用；Λ构型的阳离子与阴离子S-构型C原子上羟基氧形成氢键相互作用而实现的。     

脑神经退行性疾病中的有机化学-朊病毒(疯牛病)中的蛋白物理有机化学和自由基化学

通过关于“普里昂”蛋白病毒疾病的已有临床、医学生理、免疫和化学等方面的现象，讨论了朊病毒当中的部分蛋白氧化损伤和蛋白自由基化学本质。     

乙醇-盐-水-5-Br-PADAP体系萃取分离测定钯

研究了在硫酸铵存在下 ,5 Br PADAP乙醇体系中Pd(Ⅱ )、Rh(Ⅲ )、Pt(Ⅳ )的萃取行为及乙醇溶液的分相条件 ,讨论了影响萃取率的各种因素 ,试验表明 ,室温下 ,一定 pH范围内 ,该体系中的Pd(Ⅱ )几乎可完全被乙醇相萃取 ,而Rh(Ⅲ )、Pt(Ⅳ )不被萃取或萃取率很低 ,从而可实现Pd(Ⅱ )、Rh(Ⅲ )、Pt(Ⅳ )混合离子的定量分离 ,同时建立了Pd(Ⅱ )的测定方法。乙醇相中Pd(Ⅱ ) 5 Br PADAP配合物表观摩尔吸光系数为 1.18× 10 5L·mol- 1·cm- 1,钯量在 0～ 9.6 0 μg/10ml范围内符合比耳定律 ,检出限为 0 .0 90 μg/10ml。用该法分离混合样和测定两种活性碳钯催化剂中钯 ,结果满意     

Ultraviolet photolysis of CH2I2 in methanol: O-H insertion and HI elimination reactions to form a dimethoxymethane product

Ultraviolet photolysis of low concentrations of CH2I2 in methanol solution found that CH2I2 is converted into dimethoxymethane and some H+ and I- products. Picosecond time-resolved resonance Raman (ps-TR3) experiments observed that the isodiiodomethane (CH2I-I) photoproduct decayed faster as the concentration of methanol increases, suggesting that isodiiodomethane is reacting with methanol. Ab initio calculations indicate isodiiodomethane is able to react with methanol via an O-H insertion/HI elimination to form an iodoether (ICH2-O-CH3) and HI products. The iodoether can then further react via another O-H insertion/HI elimination reaction to form the dimethoxymethane (CH3-O-CH2-O-CH3) observed in the photochemistry experiments. A reaction mechanism consistent with these experimental and theoretical observations is proposed.     

Comparison of the dehalogenation of dihalomethanes (CH2XI, where X = Cl, Br, I) following ultraviolet photolysis in aqueous and NaCl saltwater environments

The ultraviolet photolysis of low concentrations of CH(2)XI (X = Cl, Br, I) were investigated in water and saltwater solutions by photochemistry and picosecond time-resolved resonance Raman spectroscopy. Photolysis in both kinds of solutions formed mostly CH(2)(OH)(2) and HI and HX products. However, photolysis of the CH(2)XI molecules in saltwater resulted in production of some CH(2)XCl products not observed in aqueous solutions without salt present. The appearance of these new products in saltwater solutions is accompanied by a decrease in the amount of CH(2)(OH)(2), HI, and HX products compared to photolysis in aqueous solutions without salt present. The possible implications for photolysis of CH(2)XI and other polyhalomethanes in seawater and other salt aqueous environments compared to nonsaltwater solvated environments is briefly discussed.     

Facile synthesis of 9-（N-amino-4-fluoromethyl-3-pyrrolidinyl）-2- fluoro-6-aminopurine from trans-4-hydroxy-L-proline

A novel and simple procedure for synthesis of azanucleoside by Mitsunobu reaction between N-(p-nitrobenzyloxycarbonyl)- trans-4-hydroxy-D-proline methyl ester obtained from trans-4-hydroxy-L-proline after six-step reaction and 2-fluoro-6-azidopurine is described,and azanucleoside is fluorinated by new fluridizer 2,2-difluoro-1,3-dimethylimidazolidine (DFI).All reactions could be carded out under mild condition.