BLUE LIGHT-EMITTING COIL-ROD-COIL BLOCK OLIGOMERS WITH RIGID p-HEXAPHENYL AS CHROMOPHORE

The synthesis and characterization of coil-rod-coil triblock oligomers, poly（ethylene oxide）-b-p-hexaphenyl-b- poly（ethylene oxide）, are described. The number of repeating ethylene oxide units in each flexible block are 3 （EO3-PHP- EO3）, 8 （EOs-PHP-EO8）, 13 （EO13-PHP-EO13）, and 17 （EO17-PHP-EO17）, respectively. The structures of these oligomers are confirmed by ^1H-NMR, 13C-NMR, EA, and MALDI-TOF mass spectrometry. The introduction of soluble poly（ethylene oxide） coils to the rigid p-hexaphenyl segment significantly improves the solubility of the oligomers, so they can form smooth thin films by spin-coating from their solutions. The oligomers are quite thermally stable and have 1% weight loss temperatures at above 340℃ under nitrogen. They can emit strong blue light in both solution and film state, and have fluorescence quantum yields of about 40% in chloroform. They are expected to have potential applications in optoelectronic devices.     

E,E-1,4-二[2′,2″-(苯并噁唑基乙烯基)]苯及其衍生物的合成和光性能研究

合成了E,E-1,4-二[2′,2″-(苯并(口恶)唑基乙烯基)]苯及衍生物共14种,测定了它们的熔点、红外光谱、核磁共振氢谱、紫外吸收光谱和荧光发射光谱、荧光量子产率及激光性能。     

Poly（meta-phenylene） Derivative with Rigid Twisted Biphenyl Units in Backbone： Synthesis, Structural Characterization, Photophysical Properties and Electroluminescence

A soluble poly(meta-phenylene)derivative with rigid twisted biphenyl unit was synthesized by the Yamamoto coupling reaction.The polymer is soluble in common organic solvents,and the number-average molecular weight is about 6500.The UV-Vis and quantum chemical calculation indicate that the different conformation segments named "conformers" exist in the polymer backbones;it was also further confirmed by the single crystal X-ray diffraction study of the dimeric model compound.The π-π transition of biphenyl segments of twisted and planar conformations made the polymer exhibit a strong absorption around 256 nm and a weak absorption at about 300 nm.Furthermore,the polymer exhibits a strong UV photoluminescence at 372 nm when the excitation wavelengths are longer than 300 nm.The ultraviolet-emitting electroluminescence(EL)device with the single layer structure shows EL λmax of the derivative at 370 nm.     

Multilayer poly(vinyl alcohol)-adsorbed coating on poly(dimethylsiloxane) microfluidic chips for biopolymer separation

A poly(dimethylsiloxane) (PDMS) microfluidic chip surface was modified by multilayer-adsorbed and heat-immobilized poly(vinyl alcohol) (PVA) after oxygen plasma treatment. The reflection absorption infrared spectrum (RAIRS) showed that 88% hydrolyzed PVA adsorbed more strongly than 100% hydrolyzed one on the oxygen plasma-pretreated PDMS surface, and they all had little adsorption on original PDMS surface. Repeating the coating procedure three times was found to produce the most robust and effective coating. PVA coating converted the original PDMS surface from a hydrophobic one into a hydrophilic surface, and suppressed electroosmotic flow (EOF) in the range of pH 3-11. More than 1,000,000 plates/m and baseline resolution were obtained for separation of fluorescently labeled basic proteins (lysozyme, ribonuclease B). Fluorescently labeled acidic proteins (bovine serum albumin, beta-lactoglobulin) and fragments of dsDNA phiX174 RF/HaeIII were also separated satisfactorily in the three-layer 88% PVA-coated PDMS microchip. Good separation of basic proteins was obtained for about 70 consecutive runs.     

Filtered backprojection for the reconstruction of a high-resolution (4,2)D CH3-NH NOESY spectrum on a 29 kDa protein

Projection-reconstruction (PR) NMR enables rapid collection of multidimensional NMR data. NOESY represents a particularly difficult challenge for currently existing reconstruction algorithms, as it requires the quantitative reconstruction of an unknown number of peaks, at full sensitivity. We have demonstrated the successful application of PR-NMR to NOESY by determining the 4D methyl/amide NOESY spectrum of a 29 kDa protein, human carbonic anhydrase II, from 2D projections, using filtered backprojection for reconstruction. Compared with a 3D control spectrum, all expected peaks were faithfully reconstructed, with correct volumes and with no artifacts. Filtered backprojection thus provides a way to obtain high-resolution 4D NOESY data in the time required for conventional 3D data collection.     

Study on the formation of the ketonic defects in the thermal degradation of ladder-type poly(p-phenylenes) by vibrational spectroscopy

We have investigated the thermal degradation in air by Fourier transform infrared spectroscopy of a ladder-type copolymer containing fluorene units in the backbone (Me-LPF), to reveal the formation of the ketonic defects. As thermal treatment of Me-LPF film at 200 degrees C in air proceeds, a new group of complex absorption bands due to degradation products arises in the range between 1800 and 1600 cm(-1). The observed overlapping bands were separated and assigned by utilizing the second-derivative IR spectral analysis, which can narrow the peak width to one-third of the originals and thereby eases the analysis. The degraded products were assigned as fluorenone (1718 cm(-1)) and benzophenone (Ar-(C=O)-Ar) (1665 cm(-1)), formed by the oxidation of the backbone, and acylphenone (Ar-(C=O)-R) (1685 cm(-1)) from the side chain. The fluorenone was found to be the major component among the degraded products in the main chain, and the time and temperature dependence indicated that the oxidation is a kind of autocatalytic radical-chain process. The oxidation can reach a very high degree (approximately 30% for 6 h oxidation at 240 degrees C estimated by absorption of the alkyl). Our results suggest the possibility of the oxidation of the 9-bialkylfluorene sites. We propose that the degradation of the alkyl in the side chain can help the radicals to propagate in the chain reaction.     

A Density Functional Theory Study on Electronic Structure and Second—order Nonlinear Optical Properties of Some Push—Pull Molecules

Time-dependent density-functional theory(TDDFT)has been applied to calculate the electronic structure and second-order nonlinear optical(NLO) properties of some organic molecules.The two-dimensional(2-D)charge transfer charateristics of calculated molecules were studied and compared with corresponding experimental results.All the theoretical results agree well with the measurement.For 2-D molecule with two-fold symmetry,the dominant charge transfer is off-diagonal,while for three-fold symmetry 2-D molecule,the dominant charge transfer is not only between branches and central group but also among branches.     

氢在钯单晶表面的解离与在体相的扩散

氢分子在金属表面的解离吸附与氢原子在金属体相的扩散是个典型的表面过程.前者在甲烷化及合成氨等基础化工反应中起着关键作用;后者常常导致金属材料的脆化与断裂,但过渡金属及其合金是安全和优良的储氢材料.因此,研究氢分子在金属表面的解离吸附与氢原子在金属体相的扩散,是多相催化与金属物理广泛感兴趣的课题,具有重要的理论和应用价值.本文采用分子动力学方法初步探讨了二者之间的关联.分子催化动力学为从微观层次上研究上述课题提供了一种理论方法.本文采用经过我们改进的半经验LEPS方法,计算了氢分子在Pd(100)和(110)晶面的解离和氢原子在钯表面与体相扩散的相互作用位能面,并根据计算结果探讨了其微观机理.     

基质辅助激光解吸附飞行时间质谱分析缩合单宁的阳离子化问题

以单价金属离子Cs 和Na 作为离子化试剂,对3种缩合单宁进行基质辅助激光解吸附飞行时间(MALD I-TOF)质谱分析。加入Na 作为阳离子化试剂,能得到较高质量的质谱图。但由于实验通道中几乎不可能完全去除的K 的干扰而会高估棓儿茶酚/表棓儿茶酚单元的组成比例,从而影响对棓儿茶酚/表棓儿茶酚单元存在与否的判断;选择Cs 作为阳离子化试剂可以避免此问题,但在复杂的缩合单宁分析中,同样因为杂质离子Na 和K 的干扰而使得质谱图变得更复杂;未去离子处理直接对缩合单宁进行MALD I-TOF质谱分析与去离子并加入Cs 的处理比去离子并加入Na 能检测到更高聚合度的高聚物,检测到离子峰强度最高的聚合物随离子不同而不同。     

A Selective Cholesterol Biosensor Based on Composite Film Modified Electrode for Amperometric Detection

An amperometric cholesterol biosensor based on immobilization of cholesterol oxidase in a Prussian blue (PB)/polypyrrole (PPy) composite film on the surface of a glassy carbon electrode was fabricated. Hydrogen peroxide produced by the enzymatic reaction was catalytically reduced on the PB film electrode at 0 V with a sensitivity of 39 μA (mol/L)^?1. Cholesterol in the concentration range of 10^?5 ? 10^?4 mol/L was determined with a detection limit of 6 × 10^?7 mol/L by amperometric method. Normal coexisting compounds in the bio‐samples such as ascorbic acid and uric acid do not interfere with the determination. The excellent properties of the sensor in sensitivity and selectivity are attributed to the PB/PPy layer modified on the sensor.