DFT study on H2O activation by stepped and planar Rh surfaces

In this research the effect of steps (lower coordinated surface atoms) and the presence of pre-adsorbed oxygen on the activation energy of water are studied with DFT. Without oxygen water activation is found to be structure insensitive. When oxygen is adsorbed on the surface and acts as the acceptor for the hydrogen at the step edge, the barrier will decrease significantly.     

Magnetically induced decrease in droplet contact angle on nanostructured surfaces

We report a magnetic technique for altering the apparent contact angle of aqueous droplets deposited on a nanostructured surface. Polymeric tubes with embedded superparamagnetic magnetite (Fe(3)O(4)) nanoparticles were prepared via layer-by-layer deposition in the 800 nm diameter pores of polycarbonate track-etched (PCTE) membranes. Etching away the original membrane yields a superparamagnetic film composed of mostly vertical tubes attached to a rigid substrate. We demonstrate that the apparent contact angle of pure water droplets deposited on the nanostructured film is highly sensitive to the ante situm strength of an applied magnetic field, decreasing linearly from 117 ± 1.3° at no applied field to 105 ± 0.4° at an applied field of approximately 500 G. Importantly, this decrease in contact angle did not require an inordinately strong magnetic field: a 15° decrease in contact angle was observed even with a standard alnico bar magnet. We interpret the observed contact angle behavior in terms of magnetically induced conformation changes in the film nanostructure, and we discuss the implications for reversibly switching substrates from hydrophilic to hydrophobic via externally tunable magnetic fields.     

Mono- and dinuclear iron complexes of bis(1-methylimidazol-2-yl)ketone (bik): structure, magnetic properties, and catalytic oxidation studies

The newly synthesized dinuclear complex [Fe(III)(2)(μ-OH)(2)(bik)(4)](NO(3))(4) (1) (bik, bis(1-methylimidazol-2-yl)ketone) shows rather short Fe···Fe (3.0723(6) ?) and Fe-O distances (1.941(2)/1.949(2) ?) compared to other unsupported Fe(III)(2)(μ-OH)(2) complexes. The bridging hydroxide groups of 1 are strongly hydrogen-bonded to a nitrate anion. The (57)Fe isomer shift (δ = 0.45 mm s(-1)) and quadrupole splitting (ΔE(Q) = 0.26 mm s(-1)) obtained from Mo?ssbauer spectroscopy are consistent with the presence of two identical high-spin iron(III) sites. Variable-temperature magnetic susceptibility studies revealed antiferromagnetic exchange (J = 35.9 cm(-1) and H = JS(1)·S(2)) of the metal ions. The optimized DFT geometry of the cation of 1 in the gas phase agrees well with the crystal structure, but both the Fe···Fe and Fe-OH distances are overestimated (3.281 and 2.034 ?, respectively). The agreement in these parameters improves dramatically (3.074 and 1.966 ?) when the hydrogen-bonded nitrate groups are included, reducing the value calculated for J by 35%. Spontaneous reduction of 1 was observed in methanol, yielding a blue [Fe(II)(bik)(3)](2+) species. Variable-temperature magnetic susceptibility measurements of [Fe(II)(bik)(3)](OTf)(2) (2) revealed spin-crossover behavior. Thermal hysteresis was observed with 2, due to a loss of cocrystallized solvent molecules, as monitored by thermogravimetric analysis. The hysteresis disappears once the solvent is fully depleted by thermal cycling. [Fe(II)(bik)(3)](OTf)(2) (2) catalyzes the oxidation of alkanes with t-BuOOH. High selectivity for tertiary C-H bond oxidation was observed with adamantane (3°/2° value of 29.6); low alcohol/ketone ratios in cyclohexane and ethylbenzene oxidation, a strong dependence of total turnover number on the presence of O(2), and a low retention of configuration in cis-1,2-dimethylcyclohexane oxidation were observed. Stereoselective oxidation of olefins with dihydrogen peroxide yielding epoxides was observed under both limiting oxidant and substrate conditions.     

Using wavelets to analyze AFM images of thin films: surface micelles and supported lipid bilayers

This paper presents micro- and nanoanalysis of thin films based on images obtained by atomic force microscopy (AFM). The analysis exploits the discrete wavelet transform and the resulting wavelet spectrum to study surface features. It is demonstrated that the wavelet technique can characterize micro- and nanosurface features and distinguish between similar surface structures. The use of a feature extraction method is shown. The method involves the separation of certain frequency content from the original AFM images and analyzing the data independently to gain quantitative information about the images. By using the feature extraction method, soft surfaces in water are analyzed and nanofeatures are measured. The packing of surface micelles of sodium dodecyl sulfate on a self-assembled monolayer is analyzed. The characteristics of pore formation, due to penetration of the antibacterial peptide protegrin, into a solid-supported lipid bilayer are quantified. The sizes of the pores are obtained, and it is observed that the line tension of the pores reduces the fluctuations of the lipid bilayer.     

The rational design of modified Cinchona alkaloid catalysts. Application to a new asymmetric synthesis of chiral chromanes

A new asymmetric synthesis of 2-substituted chiral chromanes has been achieved. The key step is the intramolecular conjugate addition of a phenolic nucleophile on a α,β-unsaturated ester catalyzed by Cinchona alkaloids. The high ee’s obtained with cinchonine and its derivatives have been rationalized by ab initio quantum chemistry calculations of transition state structures.     

Poly(ethylene glycol)–poly(L‐lactide) star block copolymer hydrogels crosslinked by metal–ligand coordination

The aqueous solution behavior and thermoreversible gelation properties of pyridine‐end‐functionalized poly(ethylene glycol)–poly(L ‐lactide) (PEG–(PLLA)₈–py) star block copolymers in the presence of coordinating transition metal ions were studied. In aqueous solutions, the macromonomers self‐assembled into micelles and micellar aggregates at low concentrations and formed physically crosslinked, thermoreversible hydrogels above a critical gel concentration (CGC) of 8% w/v. In the presence of transition metal ions like Cu(II), Co(II), or Mn(II), the aggregate dimensions increased. Above the CGC, the gel–sol transition shifted to higher temperatures due to the formation of additional crosslinks from intermolecular coordination complexes between metal ions and pyridine ligands. Furthermore, as an example, PEG–(PLLA)₈–py hydrogels stabilized by Mn(II)–pyridine coordination complexes were more resistant against degradation/dissolution when placed in phosphate buffered saline at 37 °C when compared with hydrogels prepared in water. Importantly, the stabilizing effect of metal–ligand coordination was noticeable at very low Cu(II) concentrations, which have been reported to be noncytotoxic for fibroblasts in vitro. These novel PEG–(PLLA)₈–py metallo‐hydrogels, which are the first systems to combine metal–ligand coordination with the advantageous properties of PEG–PLLA copolymer hydrogels, are appealing materials that may find use in biomedical as well as environmental applications like the removal of heavy metal ions from waste streams. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of novel azanorbornylpurine derivatives

Azanorbornylpurine derivatives were prepared by Mitsunobu reaction of appropriate hydroxyazanorbornane derivative with 6-chloropurine or construction of purine base at azanorbornylamines. The prepared target compounds were evaluated for antiviral activity and effect on neuronal and muscle nicotinic acetylcholine receptors.