Préparation,configuration et réduction électrochimique d'α-cyano β-nitrostyrènes. Synthèse d'amino-5 isoxazoles

Z α-Cyano-β-nitrostyrenes were prepared by nitration with dinitrogentetroxide of the corresponding α-cyanostyrenes. Elsomers were obtained by photoirradiation of Z isomers. The electrochemical reduction of these cyanonitro compounds generates the α-cyanooximes which lead, according to the experimental conditions(ring closure or hydrolysis), either to 5-aminoisoxazoles or to β-ketonitriles.     

Study of Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile for odorant biosensors

To make ultrathin films for the fabrication of artificial olfactory systems, odorant biosensors, we have investigated mixed Langmuir and Langmuir-Blodgett films of odorant-binding protein/amphiphile. Under optimized experimental conditions (phosphate buffer solution, pH 7.5, OBP-1F concentration of 4 mg L(-1), target pressure 35 mN m(-1)), the mixed monolayer at the air/water interface is very stable and has been efficiently transferred onto gold supports, which were previously functionalized by self-assembled monolayers (SAMs) with 1-octadecanethiol (ODT). Atomic force microscopy and electrochemical impedance spectroscopy were used to characterize mixed Langmuir-Blodgett (LB) films before and after contact with a specific odorant molecule, isoamyl acetate. AFM phase images show a higher contrast after contact with the odorant molecule due to the new structure of the OBP-1F/ODA LB film. Non-Faradaic electrochemical spectroscopy (EIS) is used to quantify the effect of the odorant based on the electrical properties of the OBP-1F/ODA LB film, as its resistance strongly decreases from 1.18 MOmega (before contact) to 25 kOmega (after contact).     

pH-controlled change of the metal coordination in a dicopper(II) complex of the ligand H-BPMP: crystal structures, magnetic properties, and catecholase activity

The dinucleating ligand 2,6-bis[(bis(2-pyridylmethyl)amino)methyl]-4-methylphenol (H-BPMP) has been used to synthesize the three dinuclear Cu(II) complexes [Cu2(BPMP)(OH)][ClO4](2).0.5C4H8O (1), [Cu2(BPMP)(H2O)2](ClO4)(3).4H2O (2), and [Cu2(H-BPMP)][(ClO4)4].2CH3CN (3). X-ray diffraction studies reveal that 1 is a mu-hydroxo, mu-phenoxo complex, 2 a diaqua, mu-phenoxo complex, and 3 a binuclear complex with Cu-Cu distances of 2.96, 4.32, and 6.92 A, respectively. Magnetization measurements reveal that 1 is moderately antiferromagnetically coupled while 2 and 3 are essentially uncoupled. The electronic spectra in acetonitrile or in water solutions give results in accordance with the solid-state structures. 1 is EPR-silent, in agreement with the antiferromagnetic coupling between the two copper atoms. The X-band spectrum of powdered 2 is consistent with a tetragonally elongated square pyramid geometry around the Cu(II) ions, in accordance with the solid-state structure, while the spectrum in frozen solution suggests a change in the coordination geometry. The EPR spectra of 3 corroborate the solid-state and UV-visible studies. The 1H NMR spectra also lead to observations in accordance with the conclusions from other spectroscopies. The electrochemical behavior of 1 and 2 in acetonitrile or in water solutions shows that the first reduction (Cu(II)Cu(II)-Cu(II)Cu(I) redox couple) is reversible and the second (formation of Cu(I)Cu(I) irreversible. In water, 1 and 2 are reversibly interconverted upon acid/base titration (pK 4.95). In basic medium a new species, 4, is reversibly formed (pK 12.0), identified as the bishydroxo complex. Only 1 exhibits catecholase activity (oxidation of 3,5-di-tert-butylcatechol to the corresponding quinone, vmax = 1.1 x 10(-6) M-1 s-1 and KM = 1.49 mM). The results indicate that the pH dependence of the catalytic abilities of the complexes is related to changes in the coordination sphere of the metal centers.     

Proton uptake of rhodobacter capsulatus reaction center mutants modified in the primary quinone environment

Flash-induced absorbance spectroscopy was used to analyze the proton uptake and electron transfer properties of photosynthetic reaction centers (RC) of Rhodobacter capsulatus that have been genetically modified near the primary quinone electron acceptor (Q(A)). M246Ala and M247Ala, which are symmetry-related to the positions of two acidic groups, L212Glu and L213Asp, in the secondary quinone electron acceptor (QB) protein environment, have been mutated to Glu and Asp, respectively. The pH dependence of the stoichiometry of proton uptake upon formation of the P+Q(A)- (H+/P+Q(A)-) and PQ(A) (H+/Q(A)-) (P is the primary electron donor, a noncovalently linked bacteriochlorophyll dimer) states have been measured in the M246Ala --> Glu and the M247Ala --> Asp mutant RC, in the M246Ala-M247Ala --> Glu-Asp double mutant and in the wild type (WT). Our results show that the introduction of an acidic group (Glu or Asp) in the QA protein region induces notable additional proton uptake over a large pH region (approximately 6-9), which reflects a delocalized response of the protein to the formation of Q(A)-. This may indicate the existence of a widely spread proton reservoir in the cytoplasmic region of the protein. Interestingly, the pH titration curves of the proton release caused by the formation of P+ (H+/P+: difference between H+/P+Q(A)- and H+/PQ(A)- curves) are nearly superimposable in the WT and the M246Ala --> Glu mutant RC, but substantial additional proton release is detected between pH 7 and 9 in the M247Ala --> Asp mutant RC. This effect can be accounted for by an increased proton release by the P+ environment in the M247Ala --> Asp mutant. The M247Ala --> Asp mutation reveals the existence of an energetic and conformational coupling between donor and acceptor sides of the RC at a distance of nearly 30A.     

A doubly deprotonated form of calix[6]arene: Crystal and molecular structure of (calix[6]arene-2H)2−·(HNEt 3 + )2

The doubly deprotonated form of calix[6]arene, with two protonated triethylamines as counter-ions, crystallizes in the monoclinic system: space groupP2₁/n,a=8.465(4),b=17.822(8),c=15.182(6) Å,=90.18(4)°,V=2291(2) ų,Z=2. Refinement led to a final conventionalR value of 0.063 for 1046 reflections. The macrocycle conformation is not apinched cone, usual for freeR-calix[6]arene, but a distorted 1,2,3-alternate cone, since the molecule lies on a symmetry center. Furthermore, one of the torsion angles defined by the methylene bridges is near to zero, which is unusual in calixarene structures. Supplementary Data relating to this article (atomic coordinates for hydrogen atoms, anisotropic displacement parameters for oxygen and nitrogen atoms, and observed and calculated structure factors) are deposited with the British Library as Supplementary Publication No. SUP 82182 (7 pages).     

Carboxylate-substituted radicals from phenylselenide derivatives. Designs on models for coenzyme B12-dependent enzyme-catalyzed rearrangements

Laser flash photolysis (266 nm) of alpha- and beta-phenylselenyl esters, carboxylic acids, and carboxylates in aqueous acetonitrile media gave the corresponding radicals by homolytic cleavage of the phenylselenyl groups. In the beta-substituted systems, acid and carboxylate radicals reacted in intramolecular reporter reactions with approximately equal rate constants. For the alpha-substituted systems, an ester- and carboxylic acid-substituted radical reacted in an intramolecular reporter reaction with the same rate constants, but the analogous alpha-carboxylate radical, a radical anion, reacted an order of magnitude less rapidly and with an activation energy that is 3 kcal/mol greater than that found for analogues. A kinetic titration of the equilibrating alpha-acid and alpha-carboxylate radicals gave pKa = 4.6. The results indicate that alpha-ester and alpha-carboxylic acid radicals are unlikely to be appropriate models for alpha-carboxylate radicals, the intermediates formed in a large subset of coenzyme B12-dependent enzyme-catalyzed reactions.     

On the existence of thermodynamics for the random energy model

Derrida's random energy model is considered. Almost sure andL ^P convergence of the free energy at any inverse temperature are proven. Rigorous upper and lower bounds to the finite size corrections to the free energy are given.     

Design of organic semiconductors: tuning the electronic properties of pi-conjugated oligothiophenes with the 3,4-ethylenedioxythiophene (EDOT) building block

Hybrid oligothiophenes based on a various combinations of thiophene and 3,4-ethylenedioxythiophene (EDOT) groups have been synthesized. UV/Vis absorption spectra show that the number and relative positions of the EDOT groups considerably affect the width of the HOMO-LUMO gap and the rigidity of the conjugated system. Analysis of the crystallographic structure of two hybrid quaterthiophenes confirms that insertion of two adjacent EDOT units in the middle of the molecule leads to a self-rigidification of the conjugated systems by intramolecular SO interactions. Cyclic voltammetry data shows that the first oxidation potential of the oligomers decreases with increasing chain length and increasing number of EDOT groups for a given chain length. Electrochemical studies and theoretical calculations show that the positions of the EDOT units in the conjugated chain control the potential difference (DeltaE(p)) between the first and second oxidation steps. Moving the EDOT groups from the outer to the inner positions of the conjugated system increases DeltaE(p). Theoretical calculations confirm that this phenomenon reflects an increase of the intramolecular coulombic repulsion between positive charges in the dication. A thin-film field-effect transistor was fabricated by vacuum sublimation of a pentamer with alternating thiophene-EDOT structure, and the hole mobility was determined.     

Molecules organiques coordinees a un metal. : Nouveaux complexes olefiniques d'α-enones par le fer(0)

Heterodienetricarbonyliron complexes react with ligands ( L = PMe₂Ph, P(OMe)₃ or P(OPh)₃) to give the adducts (enone)Fe(CO)₃L with the ethylenic double bond coordinated only to the iron(0). Electron-releasing and low-steric effects of L make the reaction which is specific for enones easier compared to that for dienes. PMe₂Ph allows enone exchange and P(OPh)₃ promotes carbonyl elimination. Ligand influence is shown by infrared spectroscopy and by the shielding of ethylenic protons in NMR spectroscopy.     

Surface and porosity of nanocrystalline boehmite xerogels

Boehmite xerogels are prepared by hydrolysis of Al(OC4H9)3 followed by peptization with HNO3 (H+/Al = 0, 0.07, 0.2). XRD and TEM show that these gels are made of nanosized crystals (5-9 nm in width and 3 nm thick). According to the amount of acid, no significant differences are found in size and shape, but only in the spatial arrangement of the crystallites. Nitrogen adsorption-desorption isotherms of nonpeptized gels are of type IV, whereas isotherms of peptized gels are of type I. These isotherms are analyzed by the t-plot method. The majority of pore volume results from intercrystalline mesopores, but the peptized gels also contain intercrystalline micropores. The particle packing is very dense for the gel peptized with H+/Al = 0.2 (porosity = 0.26), but it is less dense in non-peptized gel (porosity = 0.44). Heating these gels under vacuum creates, from 250 degrees C onwards, an intracrystalline microporosity resulting from the conversion of boehmite into transition alumina. But heating also causes intercrystalline micropores collapsing. The specific surface area increases up to a limit temperature (300 degrees C for nonpeptized gels and 400 degrees C for peptized) beyond which sintering of the particles begins and the surface decreases. The PSD are calculated assuming a cylindrical pore geometry and using the corrected Kelvin equation proposed by Kruk et al. Peptized xerogels give a monomodal distribution with a maximum near 2 nm and no pores are larger than 6 nm. Nonpeptized gels have a bimodal distribution with a narrow peak near to 2 nm and a broad unsymmetrical peak with a maximum at 4 nm. Heating in air above 400 degrees C has a strong effect on the porosity. As the temperature increases, there is a broadening of the distribution and a marked decrease of small pores (below 3 nm). However, even after treatment at 800 degrees C, micropores are still present.