Copper reagents: a new and efficient solution for the selective addition of metallated propargylic amines to aldehydes

[reaction: see text] Anti alpha-amino-homopropargylic alcohols are prepared by addition of metallated propargylic amines to aldehydes. Among the four organometallic (LI, Zn, Ti, Cu) derivatives used, the most effective are the copper reagents.     

High-pressure structure of Li2CO3

The high-pressure behavior of Li₂CO₃ is studied up to 25 GPa with synchrotron angle-dispersive powder X-ray diffraction in diamond anvil cells and synthesis using a multi-anvil apparatus. A new non-quenchable hexagonal polymorph (P6₃/mcm, Z=2) occurs above 10 GPa with carbonate groups in a staggered configuration along the c-axis—a=4.4568(2) Å and c=5.1254(6) Å at 10 GPa. Two columns of face-shared distorted octahedra around the Li atoms are linked through octahedral edges. The oxygen atoms are coordinated to one carbon atom and four lithium atoms to form a distorted square pyramid. Splittings of X-ray reflections for the new polymorph observed above about 22 GPa under non-hydrostatic conditions arise from orthorhombic or monoclinic distortions of the hexagonal lattice. The results of this study are discussed in relation to the structural features found in other Me₂CO₃ carbonates (Me: Na, K, Rb, Cs) at atmospheric conditions.     

Further studies on dppm-stabilized mixed-metal clusters: X-ray structure of PdPtCoCl(CO)3(μ-dppm)2 1

The metalloligated mixed-metal cluster [PdPtCo₂(CO)₇(-dppm)₂] (2) (dppm = -Ph₂PCH₂PPh₂) possesses numerous potential reaction centers (e.g., metal(s), metal-metal bonds, CO, and dppm ligands) and this has previously led to an investigation of the site selectivity of reactions with nucleophiles. The exocyclic CO(CO)₄ fragment was substituted with a chloride ligand and the resulting chiral, triangular cluster PdPtCoCl(CO)₃(-dppm)₂ (4) has been structurally characterized. The Pd-Co and Pt-Co edges of this almost equilateral triangle are bridged by a dppm ligand, and two of the three carbonyls borne by the Co atom are semi-triply bridging above and below the plane of the metals. The Co(CO)₃P fragment behaves as an anionic 4-electron donor organometallic bridging group toward thed ⁹-d ⁹ Pd(I)-Pt(I) unit. Crystal data for4, monoclinic space groupP2₁/n with Z=4 in a unit cell of dimensionsa=12.291(3),b=19.321(4),c=23.680(5) Å,=100.05(2)°. The structure has been solved from diffractometer data by Patterson, Fourier methods and refined by full-matrix least squares on the basis of 3512 observed reflections (l>3) toR(F) andR _w(F) values of 0.059 and 0.061.Dedicated to Professor L. F. Dahl on the occasion of his 65th birthday, with our sincere congratulations and best wishes.     

Effect of the Coil Angle in an Inductively Coupled Plasma Torch: A Novel Two-Dimensional Model

A two-dimensional model has been developed for the calculation of the electromagnetic (EM) fields generated by spiral coil currents, in order to obtain a better representation of the actual configuration used in a typical inductively coupled plasma (ICP) torch. In order to obtain the EM fields in a two-dimensional model, the change of EM field in tangential direction is neglected and the coil is assumed to be a concentric cylinder. In order to justify our assumption, the EM, flow and temperature fields resulting from five-ring coil and concentric cylinder coil are compared and the results are almost the same except for the EM field in the vicinity of the coil. In the case of the spiral coil, the coil current is inclined with respect to the horizontal plane. Therefore current in the cylinder coil is assumed to have the same inclined angle, which is split into tangential and axial components. The axial electric field and hence an axial current in plasma is induced by the axial component of the spiral coil current. Charge density is accumulated in the plasma, since the axial current cannot form a loop. In order to obtain the EM field and the charge distribution in the plasma generated by the spiral coil, the equations of axial vector potential and electrostatic potential have been derived. Due to the swirling Lorentz force (J_z×B_r) an axisymmetrical swirling fluid model is used to simulate the plasma flow in an axisymetrical configuration. With an inclined angle of the coil current being 3.7° and the frequency being 3 MHz, computational results show that the swirling Lorentz force causes plasma swirling with a maximum speed of 3.41 m/s near the plasma center when the injected sheath gas and central gas are not swirling. In these conditions, the real and imaginary parts of the maximum electrostatic potential are 0.95 V and 1.66 V, respectively. When the electrostatic field is neglected, the swirling velocity of the plasma is 3.95 m/s.     

Detection of banned meat and bone meal in feedstuffs by near-infrared microscopic analysis of the dense sediment fraction

In this paper we present an alternative method for detection of meat and bone meal (MBM) in feedstuffs by near-infrared microscopic (NIRM) analysis of the particles in the sediment fraction (dense fraction (d >1.62) from dichloroethylene) of compound feeds. To apply this method the particles of the sediment fraction are spread on a sample holder and presented to the NIR microscope. By using the pointer of the microscope the infrared beam is focussed on each particle and the NIR spectrum (1112–2500 nm) is collected. This method can be used to detect the presence of MBM at concentrations as low as 0.05% mass fraction. When results from the NIRM method were compared with the classical microscopic method, a coefficient of determination (R²) of 0.87 was obtained. The results of this study demonstrated that this method could be proposed as a complementary tool for the detection of banned MBM in feedstuffs by reinforcement of the monitoring of feeds.     

Electrical conductance of CHCl3 solutions of polyethylene oxide doped with KCI

CHCl3 solutions containing a few percent polyethylene oxide PEO (M_W = 200 000) or the low-molecular model dioxane are stirred at 50°C during more than 100 h in the presence of small amounts of KCl. The specific conductance, the viscosity and the density of the solutions are measured at 25°C as a function of time. Both PEO and dioxane act as ligands improving the solubility of KCl. The relaxation times are of the order of several hours. After 40 h or more the viscosity of the solutions increases in a spectacular way. However, the most striking observation is that the specific conductance of the polymeric solutions at 25°C is systematically 5% higher than the value measured with the same sample at 45°C, just as for metals. The effect of the dilution of the primary stirred solutions either in the pure solvent or in the initial polymer solution is investigated. These results are discussed in terms of a three-step mechanism in the polymer systems: (1) Loading of the coils to polymeric cations with a full elementary charge, as a consequence of charge transfer interactions of the crown-ether type with numerous K⁺ ions penetrating into the coils; (2) Electron tunnelling conduction of the Hamill—Ceulemans type from one positive coil to the neighbouring one; (3) Alteration of the structure of the coils and of their hydrodynamic radius by the motions of K⁺ in the coils. These ‘brachiation’ motions by a hopping mechanism result from an increased mobility of the complexed K⁺ ions, which is also the origin of the Zundel effect. They do not directly contribute to the conductance but are responsible for the delayed increase of the viscosity.     

Le diptérocarpol—II Stéréochimie en C-13 et en C-17

Various reactions of ring D of dipterocarpol (hydroxy-dammarenone-II) show this triterpene to have the configuration 13β, 17H, in accordance with biogenetic speculations.     

Hydrogel networks of poly(ethylene oxide) star-molecules supported by expanded polytetrafluoroethylene membranes: characterization, biocompatibility evaluation and glucose diffusion characteristics

The present work discusses the grafting by electron beam irradiation of poly(ethylene oxide) (PEO) star-shaped polymers onto porous expanded polytetrafluoroethylene (EXPTFE) surfaces. The resulting materials are intended to combine the good biocompatible properties of PEO with the outstanding mechanical properties of PTFE. The star-shaped PEOs were synthesized via anionic polymerization. 3 Mev electron beam irradiation was applied to graft these PEO stars onto porous EXPTFE surfaces. The hydrophobic EXPTFE surface had to be pre-modified with N-vinylpyrrolidone. ESCA was used to quantify the amount of grafted star-shaped PEO. Unmodified EXPTFE surfaces are well known, when implanted in a body, to be rapidly covered by a layer of cells and fibrin. The EXPTFE coated with PEO were implanted in the peritoneal cavity of rats (or under the back skin). This implantation did not induce any inflammation reactions and SEM analysis had attested the absence of adsorbed cells and fibrin. The glucose diffusion properties of these membranes were studied by a lag time analysis method and compared to those of pure PEO hydrogels. As expected, glucose diffuses through the hydrogel coated membrane and diffusion is not affected by the presence of the EXPTFE membrane.     

Regioselective palladium-catalyzed phenylation of ethyl 4-oxazolecarboxylate

The efficient and regioselective palladium-catalyzed C-2 arylation of ethyl 4-oxazolecarboxylate 1 with phenyliodide is described. The different parameters (solvent, base, ligand and catalyst) for the optimal conditions of this arylation process have been screened.