A Safety Strategy for Producing Poly(Acrylic Acid) of Low Molar Mass

The synthesis of poly(acrylic acid) (PAA) of low molar mass under safe conditions is difficult due to the high polymerization rate of acrylic acid (AA) and the fast heat generation. The aqueous‐solution “semibatch” polymerization of non‐ionized AA in almost starved conditions involves high initiator loads when low molar masses are required. This article proposes the simultaneous feeding of AA and nonconventional chain transfer agents (CTA) as a strategy aimed at controlling both the molar masses and the generated heat rate. Three CTAs are investigated: 2‐mercaptoethanol, thioglycolic acid, and isopropyl alcohol. Even when PAA of relatively low molar mass can be produced by adequately selecting the flow rates and concentrations of both AA and CTA, it is found that the nature of CTA can have a significant effect on the polymerizations kinetics. The mechanisms responsible for these effects are discussed with the help of a representative mathematical model.

     

β-N-Heterocyclic Cyclobutane Carboximides: Synthesis through a Tandem Base-Catalyzed Amidation/aza-Michael Addition Protocol and Facile Transformations

A stereoselective one-pot double derivatization of cyclobutene-1-carboxylic acid via a mild organic base catalyzed amidation/aza-Michael addition of benzo[d]oxazol-2(3H)-ones has been developed. This unprecedented tandem reaction provides access to novel β-N-heterocyclic cyclobutane carboximide derivatives with a trans geometry. The carboximide moiety reacts smoothly with nucleophiles, allowing access to diverse derivatives of trans-β-N-heterocyclic cyclobutanecarboxylic acid, including peptidomimetic structures.     

Design and performance of BOREAS,the beamline for resonant X‐ray absorption and scattering experiments at the ALBA synchrotron light source

The optical design of the BOREAS beamline operating at the ALBA synchrotron radiation facility is described. BOREAS is dedicated to resonant X‐ray absorption and scattering experiments using soft X‐rays, in an unusually extended photon energy range from 80 to above 4000 eV, and with full polarization control. Its optical scheme includes a fixed‐included‐angle, variable‐line‐spacing grating monochromator and a pair of refocusing mirrors, equipped with benders, in a Kirkpatrick–Baez arrangement. It is equipped with two end‐stations, one for X‐ray magnetic circular dichroism and the other for resonant magnetic scattering. The commissioning results show that the expected beamline performance is achieved both in terms of energy resolution and of photon flux at the sample position.     

Tricarbonyl rhenium(I) complexes containing a bridging 2,5-diphenyl-1,3,4-oxadiazole ligand: structural, spectroscopic, electrochemical, and computational characterization

The three complexes [Re2(mu-X1)(mu-X2)(CO)6(mu-ppd-kappaN3:kappaN4)] (X1, X2 ) H, 1; X1 ) H, X2 ) Cl, 2; X1, X2 ) Cl, 3; ppd) 2,5-diphenyl-1,3,4-oxadiazole) have been synthesized by different routes, involving the reaction of [Re4(mu3-H)4(CO)12]with ppd for 1, the reaction of 1 with HCl for 2, and the reaction of [ReCl(CO)5] with ppd for 3. The three complexes possess a different number of valence electrons, so the formal Re-Re bond order varies from 2 to 1 to 0 in complexes 1, 2, and 3, respectively. This is reflected in the Re-Re bond distance (277.9, 297.9, and 358.5 pm in the same series)and in the stability of the complexes in the coordinating solvent acetonitrile (t1/2 for ppd displacement 13.6, 4.5, and 3.7 h,for 1, 2, and 3, respectively). Both experimental and calculated structures indicates that coordination induces a distortion from planarity of the diphenyloxadiazole moiety due to the interaction of the equatorial carbonyls with the bridging ppd,which increases on going from 1 to 2 to 3 (dihedral angle between the oxadiazole and the phenyl rings 18.4 degrees, 23.3 degrees, and 45.0 degrees, respectively). The UV spectra show pi-pi* transitions of the oxadiazole ligand (which shift to higher energy on increasing the distortion from the planarity, from 252 to 267 nm) and metal-to-ligand charge transfer absorptions (from 300 to 362 nm). Upon irradiation between 340 and 380 nm, complex 2 only features a weak broad emission at 527 nm(phi)0.02%), whereas upon excitation at 300 nm, the emission typical of free ppd is observed, suggesting photodissociation.Cyclic voltammetry investigations in acetonitrile showed that the three complexes exhibit ligand-centered irreversible reduction peaks (from -1.83 to -1.93 V vs Fc+|Fc), shifted to more positive values with respect to free ppd (-2.50 V). The shift however is smaller than in the analogous derivatives containing 1,2-diazines, suggesting a smaller electron depletion of the heterocycle ligand upon coordination. The complexes also show a metal-centered, bi-electronic, irreversible oxidation peak (from 1.05 to 1.37 V vs Fc+/Fc). A combined density functional and time-dependent density functional (TD DFT)study allowed us to understand the factors affecting the stability of the three complexes and to rationalize their electrochemical and photophysical properties in terms of their electronic structure.     

Au2trien: a dinuclear gold(III) complex with unprecedented structura features

The X-ray structure of a dinuclear gold(III) complex, Au2trien, shows the presence of two square planar gold(III) centers bridged by a nitrogen donor, in a very unusual fashion.     

Tunable Linear and Nonlinear Optical Properties from Room Temperature Phosphorescent Cyclic Triimidazole-Pyrene Bio-Probe

Organic materials with multiple emissions tunable by external stimuli represent a great challenge. TTPyr, crystallizing in different polymorphs, shows a very rich photophyisics comprising excitation-dependent fluorescence and phosphorescence at ambient conditions, and mechanochromic and thermochromic behavior. Transformation among the different species has been followed by thermal and X-ray diffraction analyses and the emissive features interpreted through structural results and DFT/TDDFT calculations. Particularly intriguing is the polymorph TTPyr(HT), serendipitously obtained at high temperature but stable also at room temperature, whose non-centrosymmetric structure guarantees an SHG efficiency 10 times higher than that of standard urea. Its crystal packing, where only the TT units are strongly rigidified by π-π stacking interactions while the Pyr moieties possess partial conformational freedom, is responsible for the observed dual fluorescence. The potentialities of TTPyr for bioimaging have been successfully established.     

[Re5(μ-H)4(CO)20]− and [Re5(μ-H)5(CO)20], Two Isolobal Analogues of Cyclopentane

The first five-membered rings of metal atoms connected by M–M or M-H-M bonds only have been obtained by a Re₂+Re₃ condensation in which a polyhydride acts as a bridging bidentate ligand toward a coordinatively unsaturated fragment (see scheme below). In spite of the octahedral coordination of the Re centers, the Re₅ rings display conformations (twisted and envelope) comparable with those observed for organic five-membered rings of tetrahedral carbon atoms.     

Study of ruthenium(II) complexes with anticancer drugs as ligands. Design of metal-based phototherapeutic agents

The reaction of trans-[RuCl(2)(PPh(3))(3)] (Ph = C(6)H(5)) with 2-thio-1,3-pyrimidine (HTPYM) and 6-thiopurines (TPs) produced mainly crystalline solids that consist of cis,cis,trans-[Ru(PPh(3))(2)(N,S-TPYM)(2)] (1) and cis,cis,trans-[Ru(PPh(3))(2)(N(7),S-TPs)(2)]X(2) (X = Cl(-), CF(3)SO(3)(-)). In the case of TPs, other coordination isomers have never been isolated and reported. Instead, the mother liquor obtained after filtration of 1 produced red single crystals of trans,cis,cis-[Ru(PPh(3))(2)(N,S-TPYM)(2)].2H(3)O(+).2Cl(-) (2.2H(3)O(+).2Cl(-)). Selected ruthenium(II)-thiobase complexes were studied for their structural, reactivity, spectroscopic, redox, and cytotoxic properties. Single crystals of 1 contain thiopyrimidinato anions chelated to the metal center via N and S. The Ru[bond]N bonds are significantly elongated for 1 [2.122(2) and 2.167(2) A] with respect to 2 [2.063(3) A] because of the trans influence from PPh(3). The coordination pseudo-octahedron for 2 is significantly elongated at the apical sites (PPh(3) ligands). Solutions of cis,cis,trans isomers in air are stable for weeks, whereas those of 2 turn green within 24 h, in agreement with the respective redox potentials. cis,cis,trans- and trans,cis,cis-[Ru(PH(3))(2)(N,S-TPYM)(2)], as optimized through the DFT methods at the Becke3LYP level are in good agreement with experimental geometrical parameters (1 and 2), with cis,cis,trans being more stable than trans,cis,cis by 3.88 kcal. The trend is confirmed by molecular modeling based on semiempirical (ZINDO/1) and molecular mechanics (MM) methods. Cytotoxic activity measurements for cis,cis,trans-[Ru(PPh(3))(N-THZ)(N(7),S -H(2)TP)(2)]Cl(2) (4) (THZ = thiazole, H(2)TP = 6-thiopurine) and cis,cis,trans-[Ru(PPh(3))(2)(N(7),S-HTPR)2]Cl(2) (5) (HTPR = 6-thiopurine riboside) against ovarian cancer cells A2780/S gave IC(50) values of 17 +/- 1 and 29 +/- 9 microM, respectively. Furthermore, the spectral analysis of HTPYM, TPs, and their Ru(II) complexes in solution shows that intense absorptions occur in the UVA/vis region of light, whereas standard nucleobases absorb in the UVB region.     

Hollow-fiber flow field-flow fractionation: a gentle separation method for mass spectrometry of native proteins

Low-impact ionization sources like electrospray ionization (ESI) and matrix-assisted, laser desorption/ionization (MALDI) equipped with time-of-flight (TOF) mass analyzers provide intact protein analysis over a very wide molar mass range. ESI/TOFMS provides also indications on the higher-order structure of intact proteins and non-covalent protein complexes. However, direct analysis of intact proteins mixtures in real samples shows limited success, mainly because spectra become very complex to interpret. This is also due to sample contaminants, and to the mechanism of competitive ionization in ESI or MALDI. Rapid and efficient sample clean-up and separation methods can significantly enhance the power of TOFMS for intact protein analysis. However, if protein native conditions want to be maintained, the methods should affect neither the three-dimensional structure nor the non-covalent chemistry of the proteins. Reversed-phase (RP) HPLC, size-exclusion chromatography (SEC), and capillary zone electrophoresis (CZE) are on-line or off-line coupled to ESI/TOFMS or MALDI/TOFMS. In fact, these separation methods often show limitations when applied to the analysis of native proteins. Organic modifiers and saline buffers are required in the case of RP HPLC or CZE. They can induce protein degradation or affect ionization when MS is performed after separation. High voltages used in CZE can contribute to alter proteins from their native form. In the case of high molar mass proteins, SEC is scarcely selective, and barely able to detect protein aggregates. Sample entanglement/adsorption on the stationary phase can also occur.     

A novel approach to improve operation and performance in flow field-flow fractionation

A new system design and setup are proposed for the combined use of asymmetrical flow field-flow fractionation (AF4) and hollow-fiber flow field-flow fractionation (HF5) within the same instrumentation. To this purpose, three innovations are presented: (a) a new flow control scheme where focusing flow rates are measured in real time allowing to adjust the flow rate ratio as desired; (b) a new HF5 channel design consisting of two sets of ferrule, gasket and cap nut used to mount the fiber inside a tube. This design provides a mechanism for effective and straightforward sealing of the fiber; (c) a new AF4 channel design with only two fluid connections on the upper plate. Only one pump is needed to deliver the necessary flow rates. In the focusing/relaxation step the two parts of the focusing flow and a bypass flow flushing the detectors are created with two splits of the flow from the pump. In the elution mode the cross-flow is measured and controlled with a flow controller device. This leads to reduced pressure pulsations in the channel and improves signal to noise ratio in the detectors. Experimental results of the separation of bovine serum albumin (BSA) and of a mix of four proteins demonstrate a significant improvement in the HF5 separation performance, in terms of efficiency, resolution, and run-to-run reproducibility compared to what has been reported in the literature. Separation performance in HF5 mode is shown to be comparable to the performance in AF4 mode using a channel with two connections in the upper plate.