All-solid-state CW frequency-doubling Nd:LuVO<Subscript>4</Subscript>/KTP laser with 2.3 W output power at 545 nm

Efficient and compact green-yellow laser output at 545 nm is generated by intracavity frequency doubling of a continuous-wave (CW) diode-pumped Nd:LuVO₄ laser at 1089 nm under the condition of suppressing the higher gain transition near 1066 nm. With 18.7 W of diode pump power and the frequency-doubling crystal KTiOPO₄(KTP), as high as 2.3 W of CW output power at 545 nm is achieved, corresponding to an optical-to-optical conversion efficiency of 12.3%; the output power stability over 4 h is better than 5.4%.     

Long pulse duration of the UV laser with a multi-reflected cavity: Experiment and modeling

The long pulse operation of ultraviolet (UV) laser attributed to multi-reflection is presented on an acousto-optic (AO) Q-switched ultraviolet laser system blocking green light inside a cavity. The ultraviolet laser with the highest average power of 456 mW is obtained with 20 kHz repetition-rate. The numerical simulation of UV pulse broadening was studied using Gaussian curve approximation. The conclusion suggests that the short multi-reflected cavity and high incident pump power will be beneficial to alleviate the width broadening effect. The results, for the first time, would provide the technology for controlling the pulse width of an AO Q-switched DUV laser.     

Fabrication of two biomimetic superhydrophobic polymeric surfaces

Two biomimetic superhydrophobic polymeric surfaces were obtained by a simple approach under ambient atmosphere. Water and ethanol were used as the nonsolvents in the method of phase separation in different systems. The influences of various factors in the process were investigated. Both of the as-prepared films showed excellent superhydrophobicity, depending on the high contact angle and the low contact angle hysteresis. Moreover, the classic and a new modified Cassie-Baxter relation were used on the polystyrene and poly-α-methyl styrene films to confirm the superhydrophobic performance.     

Spin-glass behavior and magnetocaloric effect in melt-spun TbCuAl alloys

Magnetic properties and magnetocaloric effects of amorphous and crystalline TbCuAl ribbons are investigated by measuring their ac susceptibilities including a nonlinear term and dc magnetizations. The in-phase third harmonic ac susceptibility is found to be negative. It can be well fitted by the expression at high temperatures, indicating a spin-glass behavior in amorphous TbCuAl alloy. ΔT_f(ω)/[T_f(ω)Δlog₁₀ω], a possible distinguishing criterion to judge the presence of a spin-glass behavior is ∼0.011. The frequency-dependent data can be well fitted by the conventional critical slowing down law and the spin-glass transition temperature is obtained to be 20.1 K. The maximum of magnetic entropy change reaches 4.5 J kg⁻¹ K⁻¹ for a field change of 0-50 000 Oe, while the crystalline TbCuAl compound experiences a simple ferromagnetic-to-paramagnetic phase transition. The peak value of magnetic entropy change is obtained at the Curie temperature and reaches 14.4 J kg⁻¹ K⁻¹ for the same field change, which is much larger than that of amorphous TbCuAl alloy.     

Luminescence and scintillation of Eu2+‐doped high silica glass

High silica glass doped with Eu²⁺ ions was prepared as a scintillating material by impregnation of Eu ions into a porous silica glass followed by reduction sintering in CO atmosphere. A dominant emission band of the Eu²⁺ 5d–4f transition peaking around 430 nm was observed in the luminescence spectrum with the excitation peak around 280 nm and no emission from Eu³⁺ was present. Photoluminescence decay kinetics was governed by decay times of a few microseconds. The Eu²⁺‐doped high silica glass exhibited comparable energy resolution and slightly higher photoelectron yield with respect to the Bi₄Ge₃O₁₂ crystal in the pulse height spectra for X‐ray photon energies within 22–60 keV. Furthermore, a factor of 1.2 higher radioluminescence intensity was observed as well. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Photorefractive shearing interferometer

A novel method of obtaining shearing interferogram by slightly moving the crystal in a photorefractive interferometer is proposed. This method can measure the phase of an object itself instead of its diffraction field, and it is easy to realize continuously changeable shearing distance in any lateral direction and introduce carrier fringes at the same time. Both the theoretical analysis and experimental verification are given.     

Origin of the surface recombination centers in ZnO nanorods arrays by X-ray photoelectron spectroscopy

The surface composition of as-grown and annealed ZnO nanorods arrays (ZNAs) grown by a two-step chemical bath deposition method has been investigated by X-ray photoelectron spectroscopy (XPS). XPS confirms the presence of OH bonds and specific chemisorbed oxygen on the surface of ZNAs, as well as H bonds on surfaces which has been first time observed in the XPS spectra. The experimental results indicated that the OH and H bonds play the dominant role in facilitating surface recombination but specific chemisorbed oxygen also likely affect the surface recombination. Annealing can largely remove the OH and H bonds and transform the composition of the other chemisorbed oxygen at the surface to more closely resemble that of high temperature grown ZNAs, all of which suppresses surface recombination according to time-resolved photoluminescence measurements.     

Preparation and characterization of SnO2 nanoparticles using high power pulsed laser

Tin dioxide (SnO₂) nanoparticles having 3 nm size were synthesized by irradiating pure tin metal using high power Nd:YAG laser in deionized water. Formation of nano-SnO₂ crystallites was confirmed by X-ray diffraction (XRD) and AFM study. UV-vis absorption spectral studies showed a peak at 240 nm. FTIR spectrum showed a band in the range of 400-700 cm⁻¹ which was assigned to Sn-O antisymmetric vibrations. Photoluminescence spectrum of synthesized SnO₂ nanoparticles showed peak corresponding to 3.175, 2.901 and 2.613 eV respectively.     

High magnetostriction at low fields of (Tb1−xDyx)0.2Pr0.8(Fe0.4Co0.6)1.88C0.05 intermetallic compounds

The structure and magnetostriction of the (Tb_1−xDy_x)_0.2Pr_0.8(Fe_0.4Co_0.6)_1.88C_0.05 intermetallic compounds (0≤x≤1) were studied by X-ray diffraction and magnetic measurements. The formation of an approximate single Laves phase with a MgCu2-type cubic structure was observed in this series of compounds. It was found that the Curie temperature and the saturation magnetization of the compounds would decrease with increase in the Dy content up to x=1. The magnetostriction λ_a (λ_a=λ_‖-λ_⊥) gently rises when x≤0.6, and follows with a precipitous fall when x exceeds 0.6, with the highest value of λ_a being reached in the compounds with x=0.6. The magnetostriction of all the samples was observed to approach their own saturation in the magnetic fields higher than 4 kOe. This indicates that the addition of a small amount of Dy could effectively improve the low-field magnetostriction of the Tb_0.2Pr_0.8(Fe_0.4Co_0.6)_1.88C_0.05 compounds, which could become a kind of promising magnetostrictive material.