Simultaneous determination of neodymium, erbium and holmium in rare earth mixtures with 2-phenyltrifluoroacetone and octylphenol poly(ethyleneglycol) ether by third-derivative spectrophotometry

The complexes of the rare earth metals with 2-phenyltrifluoroacetone in the presence of TX-100 are reported. The characteristic absorbances of neodymium, holmium and erbium complexes can be increased by factors of 8.5, 31 and 15 respectively, compared to those of the cholrides. The third-derivative spectra have been used to eliminate the interference of cerium, and the sensitivities are increased again by factors of 7.4, 5.5 and 6.5. A method for the direct determination of neodymium, erbium and holmium in rare earth mixtures is proposed.     

Alcaloides steroidiques—CLXVII : Synthese d'azides tertiaires en serie alicyclique—III

Treatment of steroidal tertiary alcohols or olefins with N₃H/BF₃—éthérate/benzene gave 5-azido, 13-azido and 14-azido steroids. Reaction mechanism has been discussed. Chemical degradation and ¹³C NMR study confirmed structural assignments.     

Multicolor, one- and two-photon imaging of enzymatic activities in live cells with fluorescently Quenched Activity-Based Probes (qABPs)

Fluorescence imaging provides an indispensable way to locate and monitor biological targets within complex and dynamic intracellular environments. Of the various imaging agents currently available, small molecule-based probes provide a powerful tool for live cell imaging, primarily due to their desirable properties, including cell permeability (as a result of their smaller sizes), chemical tractability (e.g., different molecular structures/designs can be installed), and amenability to imaging a wide variety of biological events. With a few exceptions, most existing small molecule probes are however not suitable for in vivo bioimaging experiments in which high-resolution studies of enzyme activity and localization are necessary. In this article, we reported a new class of fluorescently Quenched Activity-Based Probes (qABPs) which are highly modular, and can sensitively image (through multiple enzyme turnovers leading to fluorescence signal amplification) different types of enzyme activities in live mammalian cells with good spatial and temporal resolution. We have also incorporated two-photon dyes into our modular probe design, enabling for the first time activity-based, fluorogenic two-photon imaging of enzyme activities. This, hence, expands the repertoire of 'smart', responsive probes currently available for live cell bioimaging experiments.     

Determination of lead by selective chelatometric titration with HEDTA after separation as its sulphate by an improved method of precipitation

A selective titrimetric determination of Pb after separation by a modified method of precipitation as its sulphate is proposed. Pb(II), present as the perchlorate, is precipitated by gentle boiling in 3.6M H(2)SO(4) presaturated with PbSO(4) and free from any extraneous anions. The customary time-consuming evaporation to fumes of sulphuric acid is dispensed with. The precipitate is collected, and dissolved in excess of HEDTA, the surplus of which is back-titrated with Zn(II) at pH 5.0-5.5. Use of Catechol Violet and Xylenol Orange as a mixed indicator gives a sharper end-point. The standard deviation of the proposed method for 60 mg of lead is 0.35 mg. The method has been successfully used to determine Pb in non-ferrous alloys.     

Core-shell structured electrode materials for lithium ion batteries

Recent progress in studies of several types of core-shell structured electrode materials, including TiO₂/C, Si/C, Si/SiO _x , LiCoO₂/C, and LiFePO₄/C nanocomposites, including details of their preparation and their electrochemical performance is briefly reviewed. Results clearly show that the coating shell can effectively prevent the aggregation of the nanosized cores, which are the electrochemically active materials. In addition, the diffusion coefficients of lithium ions can be increased, and the reversibility of lithium intercalation and deintercalation is improved. As a result, the cycling behavior is greatly improved. The reviewed results suggest that core-shell nanocomposites are a good starting point for further development of new promising electrode materials.

---

Electron energy loss studies of room-temperature co adsorption on Cu(100) induced by electron or ion irradiation

A custom-built multi-technique portable spectrometer was used to study the vibrational (and electronic) excitations associated with the “anomalous” CO adsorption recently observed on clean and oxidized Cu(100) surfaces at room temperature. Results from the electron energy loss (and thermal desorption) experiments have provided strong evidence for in-situ CO production induced by low-energy electron or ion irradiation of CO or C₂H₄ on Cu(100). In particular, the C-O vibrational stretch frequency for the room-temperature CO adsorption was found to be red-shifted by 9 meV from its nominal position (259 meV) and could be observed even at temperature as high as 420 K. Several plausible mechanisms involving coadsorbate interactions with CO on metal surfaces have been discussed. A direct interaction model involving partial bonding between CO, adsorbed on an atop site, and a coadsorbed O atom in a four-fold hollow site was found to be adequate in explaining the observed red shift and the apparent stabilization of CO on Cu(100) at room temperature.     

Examination of analyte partitioning to monocationic and dicationic imidazolium-based ionic liquid aggregates using solid-phase microextraction-gas chromatography

Solid phase microextraction coupled to gas chromatography has been used to study the partitioning behaviour of several analytes to four monocationic and two dicationic imidazolium-based ionic liquid (IL) aggregates. The 14 different analytes studied consisted of aliphatic hydrocarbons, polycyclic aromatic hydrocarbons, phenols, and esters. The obtained partition coefficients for analytes that exhibited partitioning into the IL-aggregates ranged from 30 to 5200. Hydrophobic analytes (with octanol-water partition coefficients higher than 300) appear to be preferably extracted over more polar analytes revealing the possibility of carrying out selective extractions using these aggregate systems. Monocationic IL-aggregates generally exhibited higher partition coefficients compared to analogous dicationic ILs. The micellar shape of the IL-aggregates also influences the extent of analyte partitioning.     

Subsolidus phase relations and crystal structure of compounds in the PrOx-CaO-CuO system

The subsolidus phase relations of the PrO_x-CaO-CuO pseudo-ternary system sintered at 950-1000°C have been investigated by X-ray powder diffraction. In this system, there exist one compound Ca₁₀Pr₄Cu₂₄O₄₁, one Ca₂Pr₂Cu₅O₁₀-based solid solution, seven three-phase regions and two two-phase regions. The crystal structures of Ca₁₀Pr₄Cu₂₄O₄₁ and Ca₂Pr₂Cu₅O₁₀-based solid solution have been determined. Compound Ca₁₀Pr₄Cu₂₄O₄₁ crystallizes in an orthorhombic cell with space group D_2h²⁰−Cccm, Z=4. Its lattice parameters are a=11.278(2) Å, b=12.448(3) Å and c=27.486(8) Å. The crystal structure of Ca₂Pr₂Cu₅O₁₀-based solid solution is an incommensurate phase based on the orthorhombic NaCuO₂ type subcell. The lattice parameters of the subcell of the Ca_2.4Pr_1.6Cu₅O₁₀ are a₀=2.8246(7) Å, b₀=6.3693(5) Å, c₀=10.679(1) Å, and those of the orthorhombic superstructure are with a=5a₀, b=b₀, c=5c₀. The Ca_2.4Pr_1.6Cu₅O₁₀ structure can also be determined by using a monoclinic supercell with space group C_2h⁵−P2₁/c, Z=4, a=5a₀, b=b₀, and β=104.79(1)° or 136.60(1)°, V=5a₀b₀c₀.     

Self-gelatinizable copolymer immobilized glucose biosensor based on prussian blue modified graphite electrode

A novel poly(vinyl alcohol) grafting 4-vinylpyridine self-gelatinizable copolymer was adapted to immobilize glucose oxidase. The reduction of hydrogen peroxide (H2O2) was detected at a Prussian Blue (PB) modified graphite electrode. A stable and sensitive glucose amperometric biosensor is described. The copolymer is a good biocompatible polymer in which the glucose oxidase retains high activity. Moreover, the copolymer can adhere firmly to the inorganic PB membrane. The sensor showed an apparent Michaelis-Menten constant of 18 +/- 0.2 mM and a maximum current density of 1.14 microA cm-2 mM-1. The linear range is from 5 microM to 4.5 mM glucose and the detection limit is 0.5 microM glucose. The catalytic efficiency of PB for the reduction of H2O2 is higher than that for the oxidation of H2O2. Glucose concentrations in serum samples from healthy persons and diabetic patients were determined using the sensor. The results compared well with those provided by the hospital using a spectroscopy method.     

Unraveling the relationship between structure and stabilization of triarylpyridines as G-quadruplex binding ligands

A series of novel 2,4,6-triarylpyridines have been synthesized and their interactions with intramolecular G-quadruplexes have been measured by F?rster Resonance Energy Transfer (FRET) melting and Fluorescent Intercalator Displacement (FID) assays. A few of these compounds exhibit stabilization of G4-DNA that is comparable to other benchmark G4-DNA ligands with fair to excellent G4-DNA vs. duplex selectivity and significant cytotoxicity towards HeLa cells. The nature of the 4-aryl substituents along with side chain length governs the G4-DNA stabilization ability of the compounds. In addition, we demonstrate that there is a strong correlation between the ability of the compounds to stabilize the same G4-DNA sequence in K(+) and Na(+) conditions and a strong correlation between the ability of the compounds to stabilize different G4-DNA sequences in K(+) or Na(+) buffer.