Role of measurement uncertainty in conformity assessment in legal metrology and trade

There is increasing interest in the role of measurement uncertainty in conformity assessment, particularly where measurements are in support of fair trade, health & safety and the environment. A lack of clarity, however, in treating measurement uncertainties and in setting specification limits for compliance may sometimes lead to drastic consequences. Examples concerning conformity assessment, particularly in the measurement of trace quantities (Cd in plastics and antibiotic trace residues in shrimps), are amongst cases identified in the ongoing EU project MetroTrade, which can be significant impediments to international trade. This paper considers the present status of the role of measurement uncertainty in conformity testing, covering both recent work in international standardisation and physical metrology (e.g. OIML recommendations on weighing). One conclusion is that, while much has been achieved, there still exists some work to be done in order to facilitate acceptance of conformity from both customer and supplier and avoid perceived barriers to trade and serious international trade disputes.Presented at the MetroTrade Workshop on Traceability and Measurement Uncertainty in Testing, 30–31 January 2003, Berlin, GermanyAn erratum to this article can be found at     

Glycosyl disulfides: novel glycosylating reagents with flexible aglycon alteration

[reaction: see text] Glycosyl disulfides have been shown for the first time to be effective glycosyl donors. Glucosylation and galactosylation of a panel of representative alcohol acceptors allowed the formation of 28 simple glycosides, disaccharides, and glycoamino acids in yields of up to 90%. As well as providing a novel class of effective glycosyl donors, the ability to easily alter the nature of the aglycon and the ability to differently activate donors that differ only in their aglycon simply through altering conditions lends glycosyl disulfide donors to their use in latent-active reactivity tuning strategies.     

Platelet adhesion to photodynamic therapy-treated extracellular matrix proteins

Photodynamic therapy (PDT) produces reactive species that alter vascular wall biology and vessel wall proteins. In this study, we examined platelet adhesion to PDT-treated (photosensitizer = Photofrin; fluence 100 J/cm2; lambda = 630 nm) extracellular matrix (ECM), fibrinogen, von Willebrand factor (vWF) and collagen Types I and III, under flow conditions in a recirculating perfusion chamber. Platelet adhesion was quantified by image analysis. The effect of PDT on vWF was assessed by measuring the binding of domain-specific antibodies to treated vWF. PDT significantly decreased platelet adhesion to the ECM, fibrinogen and vWF. However, PDT of collagen resulted in significantly increased platelet adhesion, with large aggregate formation. PDT affected mostly the A1 (glycoprotein [GP]-Ib-binding site), A2 and A3 (collagen-binding site) domains of vWF but not the D'-D3 (factor VIII-binding site) and B-C1 (GP-IIb/IIIa-binding site) domains. In conclusion, PDT can alter the ECM, resulting in decreased platelet adhesion. However, vessels with high collagen content, such as veins and small arteries, may become increasingly prone to thrombosis. The results of this study may thus play a role in understanding the thrombogenic properties and mechanisms of vascular PDT.     

Rational design of transglutaminase substrate peptides for rapid enzymatic formation of hydrogels

Short peptide substrates with high specificity toward transglutaminase (TGase) enzyme were designed, characterized, and coupled to a biocompatible polymer, allowing for rapid enzymatic cross-linking of peptide-polymer conjugates into hydrogels. Eight acyl acceptor Lys-peptide substrates and three acyl donor Gln-peptide substrates were rationally designed and synthesized. The kinetic constants of these peptides toward tissue transglutaminase were measured by enzyme assay using RP-HPLC analysis with the aid of LC-ESI/MS. Several acyl donor and acyl acceptor peptides with high specificities toward TGase were identified, including a few containing the unusual amino acid l-3,4-dihydroxylphenylalanine (DOPA), which is found in the adhesive proteins secreted by marine and freshwater mussels. Acyl donor and acyl acceptor peptides with high substrate specificities were separately coupled to branched poly(ethylene glycol) (PEG) polymer molecules. Equimolar solutions of these polymer-peptide conjugates rapidly formed hydrogels in less than 2 min in the presence of transglutaminase under physiological conditions. The use of biocompatible building blocks, their rapid solidification from a liquid precursor under physiologic conditions, and the ability to incorporate adhesive amino acid residues using biologically benign enzymatic cross-linking are advantageous properties for the use of such materials for tissue repair, drug delivery, and tissue engineering applications.     

An in situ FTIR-ATR study of polyacrylate adsorbed onto hematite at high pH and high ionic strength

FTIR-ATR was used to examine in situ the interaction of polyacrylate and hematite at pH 13. Static light scattering and mobility measurements were used to assess solution polyacrylate dimensions and hematite surface charge, respectively. Polyacrylate adsorption occurred only with the addition of electrolyte (e.g., NaCl), and it was found that excess cations, up to approximately 1 M, facilitated adsorption, above which the effect was found to plateau. At pH 13 and at low ionic strength, adsorption of polyacrylate onto hematite is facilitated by cations in solution shielding both the negative acrylate functionality of the polymer and the negative hematite surface. The shielding of the hematite surface continues to increase with increasing salt concentration up to a measured 3 M. Similarly, the shielding of the polymer increased with electrolyte concentration up to approximately 1 M salt, beyond which no further increase in shielding was observed. At this concentration the polymer assumes a finite minimum size in solution that ultimately limits the amount adsorbed. The dimension of the polymer in solution was found to be independent of monovalent cation type. Thus, at high pH and high ionic strength adsorption is determined by the degree of hematite surface charge reduction. The cation-hematite surface interaction was found to be specific, with lithium leading to greater polyacrylate adsorption than sodium, which was followed by cesium. The stronger affinity of lithium for the hematite surface over sodium and cesium is indicative of the inverse lyotropic adsorption series and has been rationalized in the past by the "structure-making-structure-breaking" model. These results provide a useful insight into the likely adsorption mechanism for polyacrylate flocculants at high pH and ionic strength onto residues in the Bayer processing of bauxite.     

Ab-Initio MRD-CI calculations for breaking a chemical bond in a molecule in a crystal or other solid environment. II.H3C—NO2 decomposition of nitromethane in a nitromethane crystal with voids

Recently we extended our strategy for MRD-CI (multireference double excitation-configuration interaction) calculations based on localized/local orbitals and an “effective” CI Hamiltonian for molecular decompositions of large molecules to breaking a chemical bond in a molecule in a crystal or other solid environment. Our technique involves solving a quantum chemical ab-initio SCF explicitly for a system of a reference molecule surrounded by a number of other molecules in the multipole environment of more distant neighbors. The resulting canonical molecular orbitals are then localized and the localized occupied and virtual orbitals in the region of interest are included explicitly in the MRD-CI with the remainder of the occupied localized orbitals being folded into an “effective” CI Hamiltonian. The MRD-CI calculations are carried out for breaking a bond in the reference molecule. This method is completely general. The space treated explicitly quantum chemically and the surrounding space can have voids, defects, deformations, dislocations, impurities, dopants, edges and surfaces, boundaries, etc. We previously applied this procedure successfully to the H₃C? NO₂ bond dissociation of nitromethane in a nitromethane crystal with extensive testing of the number of molecules that have to be included explicitly in the SCF and how many molecules have to be represented by more distant multipoles. The results indicated that it took more energy to dissociate the H₃C? NO₂ bond when the nitromethane molecule was in the crystal than it did to dissociate that bond in the free nitromethane molecule. In this present study we have investigated the effect of voids (both in the nitromethane molecules treated explicitly in the SCF and those in the environment represented by multipoles) on the calculated H₃C? NO₂ bond dissociation energies.     

Immobilization of several multienzyme systems on porous glass beads

Equimolar concentrations of malate dehydrogenase (EC 1.1.1.37) and fumarase (EC 4.2.1.2) and equimolar concentrations of malate dehydrogenase and citrate synthase (EC 4.1.3.7) were simultaneously immobilized to alkylamine porous silica beads with gluteraldehyde. The activity of each enzyme in the two-enzyme immobilized systems was determined and exact concentrations of the free nonimmobilized enzymes were prepared. The activities of the coupled free and coupled immobilized systems were measured, and it was observed that there was a 10-fold enhancement in the catalysis of the immobilized enzymes.     

Synthesis of porphyrins bearing 1-4 hydroxymethyl groups and other one-carbon oxygenic substituents in distinct patterns

Porphyrins that bear one-carbon oxygenic substituents (hydroxymethyl, formyl, ester) directly attached to the macrocycle afford a compact architecture of utility for diverse applications. Routes to 9 porphyrins bearing such groups in distinct architectures (A₄-, trans-A₂-, trans-A₂B₂-, trans-AB-, and trans-AB₂C-porphyrins) have been explored (A=hydroxymethyl), including porphyrins bearing two one-carbon units in different oxidation states (hydroxymethyl/ester, formyl/ester). The hydroxymethyl group was introduced via TBDMS-protected dipyrromethane precursors.     

New peptidomimetic polymers for antifouling surfaces

Exposure of therapeutic and diagnostic medical devices to biological fluids is often accompanied by interfacial adsorption of proteins, cells, and microorganisms. Biofouling of surfaces can lead to compromised device performance or increased cost and in some cases may be life-threatening to the patient. Although numerous antifouling polymer coatings have enjoyed short-term success in preventing protein and cell adsorption on surfaces, none have proven ideal for conferring long-term biofouling resistance. Here we describe a new biomimetic antifouling N-substituted glycine polymer (peptoid) containing a C-terminal peptide anchor derived from residues found in mussel adhesive proteins for robust attachment of the polymer onto surfaces. The methoxyethyl side chain of the peptoid portion of the polymer was chosen for its chemical resemblance to the repeat unit of the known antifouling polymer poly(ethylene glycol) (PEG), whereas the composition of the 5-mer anchoring peptide was chosen to directly mimic the DOPA- and Lys-rich sequence of a known mussel adhesive protein. Surfaces modified with this biomimetic peptide-peptoid conjugate exhibited dramatic reduction of serum protein adsorption and resistance to mammalian cell attachment for over 5 months in an in vitro assay. These new synthetic peptide based antifouling polymers may provide long-term control of surface biofouling in the physiologic, marine, and industrial environments.