Photomagnetism of a sym‐cis‐Dithiocyanato Iron(II) Complex with a Tetradentate N,N′‐Bis(2‐pyridylmethyl)1,2‐ethanediamine Ligand

A comprehensive study of the magnetic and photomagnetic behaviors of cis‐[Fe(picen)(NCS)₂] (picen=N,N′‐bis(2‐pyridylmethyl)1,2‐ethanediamine) was carried out. The spin‐equilibration was extremely slow in the vicinity of the thermal spin‐transition. When the cooling speed was slower than 0.1 K min^?1, this complex was characterized by an abrupt thermal spin‐transition at about 70 K. Measurement of the kinetics in the range 60–70 K was performed to approach the quasi‐static hysteresis loop. At low temperatures, the metastable HS state was quenched by a rapid freezing process and the critical T(TIESST) temperature, which was associated with the thermally induced excited spin‐state‐trapping (TIESST) effect, was measured. At 10 K, this complex also exhibited the well‐known light‐induced excited spin‐state‐trapping (LIESST) effect and the T(LIESST) temperature was determined. The kinetics of the metastable HS states, which were generated from the freezing effect and from the light‐induced excitation, was studied. Single‐crystal X‐ray diffraction as a function of speed‐cooling and light conditions at 30 K revealed the mechanism of the spin‐crossover in this complex as well as some direct relationships between its structural properties and its spin state. This spin‐crossover (SCO) material represents a fascinating example in which the metastability of the HS state is in close vicinity to the thermal spin‐transition region. Moreover, it is a beautiful example of a complex in which the metastable HS states can be generated, and then compared, either by the freezing effect or by the LIESST effect.     

Synthesis of 2-(1-aminocyclopropyl)pyrrolidine-3,4-diol derivatives applying titanium-mediated reaction conditions

The titanium-mediated cyclopropanation reaction using Ti(OⁱPr)₃Me/EtMgBr/BF₃·OEt₂ has been applied to various 2-cyanopyrrolidines for the synthesis of functionalized 2-(1-aminocyclopropyl)pyrrolidine-3,4-diol derivatives (dideoxyiminoalditols). Under the same experimental conditions the trans-5-azidomethyl-2-cyanopyrrolidine derivative was not cyclopropanated but reduced into the corresponding 5-amino-2-cyano derivative. After polyol deprotection 2-(1-aminocyclopropyl)pyrrolidine-3,4-diols were obtained and their inhibitory activity towards 13 glycosidases has been evaluated. (2S,3S,4R,5S)-2-(1-Aminocyclopropyl)-5-methylpyrrolidine-3,4-diol (38), which has the same absolute configuration as l-fucose, is a moderate (IC₅₀=44 μM), but selective, inhibitor of α-l-fucosidase from human placenta.     

Temperature and wavelength dependent trap filling in M2Si5N8:Eu (M=Ca,Sr, Ba) persistent phosphors

The evaluation of persistent phosphors is often focused on the processes right after the excitation, namely on the shape of the afterglow decay curve and the duration of the afterglow, in combination with thermoluminescence glow curve analysis. In this paper we study in detail the trap filling process in europium-doped alkaline earth silicon nitrides (Ca₂Si₅N₈:Eu, Sr₂Si₅N₈:Eu and Ba₂Si₅N₈:Eu), i.e., how the persistent luminescence can be induced. Both the temperature at which the phosphors are excited and the spectral distribution of the excitation light on the ability to store energy in the phosphors' lattices are investigated. We show that for these phosphors this storage process is thermally activated upon excitation in the lower 5d excited states of Eu²⁺, with the lowest thermal barrier for europium doped Ca₂Si₅N₈. Also, the influence of co-doping with thulium on the trap filling and afterglow behavior is studied. Finally there exists a clear relation between the luminescence quenching temperature and the trap filling efficiency. The latter relation can be utilized to select new efficient 5d–4f based afterglow phosphors.     

Photoinduced electron transfer in Os(terpyridine)-biphenylene-(bi)pyridinium assemblies

A series of linearly arranged donor-spacer-acceptor (D-S-A) systems 1-3, has been prepared and characterized. These dyads combine an Os(II)bis(terpyridine) unit as the photoactivable electron donor (D), a biphenylene (2) or phenylene-xylylene (3) fragment as the spacer (S), and a N-aryl-2,6-diphenylpyridinium electrophore (with aryl = 4-pyridyl or 4-pyridylium in 1 or 2/3, respectively) as the acceptor (A). Their absorption spectra, redox behavior, and luminescence properties (both at 77 K in rigid matrix and at 298 K in fluid solution) have been studied. The electronic structure and spectroscopic properties of a representative compound of the series (i.e., 2) have also been investigated at the theoretical level, performing Density Functional Theory (DFT)-based calculations. Time-dependent transient absorption spectra of 1-3 have also been recorded at room temperature. The results indicate that efficient photoinduced oxidative electron transfer takes place in the D-S-A systems at room temperature in fluid solution, for which rate constants (in the range 4 × 10(8)-2 × 10(10) s(-1)) depend on the driving force of the process and the spacer nature. In all the D-S-A systems, charge recombination is faster than photoinduced charge separation, in spite of the relatively large energy of the D(+)-S-A(-) charge-separated states (between 1.47 and 1.78 eV for the various species), which would suggest that the charge recombination occurs in the Marcus inverted region. Considerations based on superexchange mechanism suggest that the reason for the fast charge recombination is the presence of a virtual D-S(+)-A(-) state at low energy--because of the involvement of the easily oxidizable biphenylene spacer--which is beneficial for charge recombination via superexchange but unsuitable for photoinduced charge separation. To further support the above statement, we prepared a fourth D-S-A species, 4, analogous to 2 but with a (hardly oxidizable) single phenylene fragment serving as the spacer. For such a species, charge recombination (about 3 × 10(10) s(-1)) is slower than photoinduced charge separation (about 1 × 10(11) s(-1)), thereby confirming our suggestions.     

Intermolecular C-h amination of complex molecules: insights into the factors governing the selectivity

Transition-metal-catalyzed C-H amination via nitrene insertion allows the direct transformation of a C-H into a C-N bond. Given the ubiquity of C-H bonds in organic compounds, such a process raises the problem of regio- and chemoselectivity, a challenging goal even more difficult to tackle as the complexity of the substrate increases. Whereas excellent regiocontrol can be achieved by the use of an appropriate tether securing intramolecular addition of the nitrene, the intermolecular C-H amination remains much less predictable. This study aims at addressing this issue by capitalizing on an efficient stereoselective nitrene transfer involving the combination of a chiral aminating agent 1 with a chiral rhodium catalyst 2. Allylic C-H amination of terpenes and enol ethers occurs with excellent yields as well as with high regio-, chemo-, and diastereoselectivity as a result of the combination of steric and electronic factors. Conjugation of allylic C-H bonds with the π-bond would explain the chemoselectivity observed for cyclic substrates. Alkanes used in stoichiometric amounts are also efficiently functionalized with a net preference for tertiary equatorial C-H bonds. The selectivity, in this case, can be rationalized by steric and hyperconjugative effects. This study, therefore, provides useful information to better predict the site of C-H amination of complex molecules.     

Cyclodysidins A–D,cyclic lipopeptides from the marine sponge-derived Streptomyces strain RV15

Four new cyclic lipopeptides, cyclo-(AFA-Ser-Gln-Asn-Tyr-Asn-Ser-Thr), named cyclodysidins A–D, were isolated from the broth culture of Streptomyces strain RV15 associated with the marine sponge Dysidea tupha. The sequences of the amino acid building blocks in the compounds and their structures were determined by 1D- and 2D-NMR techniques and CID-MS/MS experiments. The absolute configurations of all α-amino acids were determined by HPLC analysis after derivatization with Marfey’s reagent and comparison with commercially available reference samples, while those two of the β-amino fatty acids were determined by using racemic and enantiopure reference samples synthetically prepared.     

Improving the Selectivity of the Phosphoric Acid β-Elimination on a Biotinylated Phosphopeptide

This study aims at improving the MALDI-TOF detection of a phosphorylated peptide containing a cysteine residue by ??-elimination of H₃PO₄ hardly enriched by classical methods. The experimental conditions were optimized on this phosphopeptide (biot-pAdd) and its nonphosphorylated counterpart (biot-Add). The major side-reactions were H₂S elimination on the cysteine residues and H₂O elimination on the non phosphorylated serine residue of biot-Add. The former dilutes the MALDI-TOF signal for the desired species. The latter gives a product similar to what is obtained by H₃PO₄ elimination and should prompt to caution when working with a mixture between phosphorylated and non phosphorylated peptides. Modifications on the solvent, the reaction temperature and time, the nature, and concentration of the base were made. Major improvement of the selectivity of the reaction was observed in 30?% ACN, at room temperature for 4?h. However, these optimizations are specific to these sequences and should be performed anew for different peptides. The selectivity of the reaction towards H₃PO₄ elimination is improved, but the persistence of side-reactions renders a previous sample fractionation necessary. In these optimized conditions, the ionization enhancement is 3-fold and the detection limits for biot-pAdd are similar to biot-Add (100?fmol).     

An integrated chemical biology approach provides insight into cdk2 functional redundancy and inhibitor sensitivity

1. Download : Download high-res image (204KB)
2. Download : Download full-size image

Highlights? Demonstration that Cdk2 is rate-limiting for DNA replication due to insufficient Cdk1 activity ? A simple bioinformatic approach to design inhibitor resistant mutations in kinases ? Demonstration of distinct binding modes and selectivity of Cdk inhibitors ? Identification of kinetic and structural mechanisms of inhibitor resistance     

Identification and structural characterization of the synthetic cannabinoid 3‐(1‐adamantoyl)‐1‐pentylindole as an additive in ‘herbal incense’

Since the end of 2010, more than 20 synthetic cannabimimetics have been identified in ‘Spice’ products, demonstrating the enormous dynamic in this field. In an effort to cope with the problem, many countries have already undertaken legal measures by putting some of these compounds under control. Nevertheless, once a number of compounds were scheduled, they were soon replaced by other synthetic cannabinoids. In this article, we report the identification of a new – and due to its substitution pattern rather uncommon – cannabimimetic found in several ‘herbal incense’ products. The GC–EI mass spectrum first led to misidentification as the alpha‐methyl‐derivative of JWH‐250. However, since both substances show different retention indices, thin‐layer chromatography was used to isolate the unknown compound. After application of nuclear magnetic resonance spectroscopy, high‐resolution MS and GC–MS/MS techniques, the compound was identified as 3‐(1‐adamantoyl)‐1‐pentylindole, a derivative of JWH‐018 carrying an adamantoyl moiety instead of a naphthoyl group. This finding supports that the listing of synthetic cannabinoids as prohibited substances triggers the appearance of compounds with uncommon substituents. Moreover, it emphasizes the necessity of being aware of the risk of misidentification when using techniques sometimes providing only limited structural information like GC–MS. Copyright © 2012 John Wiley & Sons, Ltd.