Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Agglomération contrôlée de latex par formation de complexes tensioactifs anioniques : copolymères à blocs à base de poly(oxyde d’éthylène)

For polystyrene–poly(ethylene oxide) (PS–PEO) diblock copolymers, as micellar dispersions in aqueous medium, the formation of complexes with anionic surfactants, such as sodium dodecylsulfate (SDS) could be confirmed. The number of SDS molecules fixed per EO unit is close to the values reported for the SDS–PEO homopolymer interaction. Advantage of this type of complexation was taken to develop a controlled agglomeration process for SDS stabilized PS and PVC latexes by using as agglomerants ‘hairy’ latexes of PS and PVC that have been synthesized in the presence of PS–PEO block copolymers and that carry therefore a fringe of PEO sequences on their surface. The complexation of SDS by these surface-anchored PEO chains leads to the destabilization of the anionic latex, which has a tendency to precipitate onto the surface of the agglomerant latex. The average particle size and the size distribution of the agglomerated particles were studied as a function of the weight and number ratio of the two types of latexes involved in the agglomeration process, as well as in function of the surface coverage by SDS and PEO respectively. By adjusting these parameters, it was possible to obtain, with an efficiency of almost 100%, latex agglomerates with a monomodal distribution in the size range of 1 to 40 μm. An agglomeration mechanism could be outlined taking into account the complexation capacity and the specific surface of the agglomerating ‘hairy’ latex. To cite this article: P. Peter et al., C. R. Chimie 6 (2003).     

Zum Nachweis der Oxyde von Molybdän,Wolfram und Vanadin

Zusammenfassung Es wird eine sehr empfindliche Reaktion zum Nachweis der Oxyde des Molybdäns, Wolframs und Vanadins angegeben. Sie beruht auf der Abscheidung von braunem Thallium(III)-oxydhydrat, aus ammoniakalischer Lösung von Thallium(I)-salzen auf Zusatz von Wasserstoffsuperoxyd und den oben genannten Oxyden, die hiebei als Katalysatoren wirken.Herrn Prof. Dr.Emil Abel, dem österreichischen Altmeister der Katalysenforschung, zum 80. Geburtstag.     

Spontaneous dissolution of a single-wall carbon nanotube salt

Upon reduction with alkali metals, single-wall carbon nanotubes (SWNTS) are shown to form polyelectrolyte salts that are soluble in polar organic solvents without any sonication, use of surfactants, or functionalization whatsoever, thus forming true thermodynamically stable solutions of naked SWNTs.     

The preparation of a cabbage reference material for environmental monitoring and food analysis

 Cabbage is frequently used in environmental monitoring and food control, and, hence, cabbage reference materials (RMs) are required for ensuring quality assurance. A cabbage RM was prepared in view of certification of specific elements from the "black list" of high toxicological interest and nutritive importance. All tasks of the RM production (production of the plant material, cutting and freeze-drying, determination of the residual water content, preparation of the RM, homogeneity testing, stability testing, certification measurements) are described in detail. Received: 12 November 1999 / Accepted: 29 January 2000     

An efficient and simple aminobenzannulation reaction: pyrrolidine as a trigger for the synthesis of 1-amino-acridines

[reaction: see text] A new aminobenzannulation methodology has been developed and applied successfully to the synthesis of 1-amino-acridines. The key and last step goes through an enamine intermediate that was detected in some cases. When pyrrolidine and powdered 4 A molecular sieves were used, the enamine synthesis and the aminobenzannulation step took place subsequently, whereas for other secondary amines, neutral Al(2)O(3) or PtCl(2) catalysis was necessary.     

Optimized intermolecular potential for aromatic hydrocarbons based on anisotropic united atoms. III. Polyaromatic and naphthenoaromatic hydrocarbons

In this third article of the series, a new anisotropic united atoms (AUA) intermolecular potential parameter set has been proposed for the carbon force centers connecting the aromatic rings of polyaromatic hydrocarbons to predict thermodynamic properties using both the Gibbs ensemble and NPT Monte Carlo simulations. The model uses the same parameters as previous AUA models used for the aromatic CH force centers. The optimization procedure is based on the minimization of a dimensionless error criterion incorporating various thermodynamic data of naphthalene at 400 and 550 K. The new model has been evaluated on a series of polyaromatic and naphthenoaromatic hydrocarbons over a wide range of temperatures up to near-critical conditions. Vaporization enthalpy, liquid density, and normal boiling temperature are reproduced with good accuracy. The new potential parameters have also been tested successfully on toluene, 1,3,5-trimethylbenzene, styrene, m-xylene, n-hexylbenzene, and n-dodecylbenzene to demonstrate their transferability to alkylbenzenes.     

Evaluation of glycoalkaloids in tubers of genetically modified virus Y-resistant potato plants (var. Désirée) by non-aqueous capillary electrophoresis coupled with electrospray ionization mass spectrometry (NACE–ESI–MS)

The glycoalkaloid content of transgenic potatoes was evaluated by an optimised method based on non-aqueous capillary electrophoresis coupled on-line with electrospray ionization-mass spectrometry (NACE-ESI-MS). The potato material consisted of tubers from a conventional cv. Désirée and from three lines of modified plants resistant, intermediate and susceptible to infection by potato virus Y (PVY). The main glycoalkaloids were confirmed to be alpha-solanine and alpha-chaconine with parent ion masses m/z 852 and 868, respectively. In addition, an unknown minor peak at m/z 850.6 was found both in conventional (control) and susceptible line potato tubers. Such a compound exhibited an MS(2) spectrum with fragments ions at 704 and 396 m/z derived by loss of two ions, i.e. m/z 146 and 307, most likely corresponding to a rhamnose unit and a [glucose-(rhamnose)(2)] moiety, respectively. Up to 30-80-fold higher concentrations of total glycoalkaloids were found in the peel compared to flesh samples of all tubers examined. TGA content was nearly doubled in peel samples of resistant compared to control lines, and these levels were lower than the limit recommended for food safety, i.e. 20-60 mg of TGA per 100 g fresh weight. Moreover, it was established that tubers produced by virus-resistant clones are substantially equivalent in glycoalkaloid contents to those produced by conventional potato varieties.     

A l'aube de la micro-analyse

Résumé L'auteur rappelle un certain nombre de découvertes notamment des XVII^e et XVIII^e siècles ayant conduit à des tests microchimiques encore utilisés de nos jours. Les découvertes géniales d'Emich prennent ainsi, par contraste, plus de valeur; son euvre est véritablement celle d'un pionnier.

---

Summary The author calls attention to a certain number of discoveries, notably of the 17th and 18th centuries, which have led to microchemical tests still in use today. The brilliant discoveries ofEmich therefore acquire more value by contrast. His work is really that of a pioneer.

---

Zusammenfassung Eine Reihe von Entdeckungen, insbesondere des 17. und 18. Jahrhunderts, werden angeführt, die zu mikrochemischen Reaktionen geführt haben, die auch heute noch in Anwendung stehen. Die genialen EntdeckungenEmichs erwiesen sich als noch wertvoller; sein Werk ist in Wahrheit das eines Pioniers.