Structure-Photodynamic Activity Relationships of a Series of 4-Substituted Zinc Phthalocyanines

Abstract— Radioiodinated zinc phthalocyanine including [¹²⁵I]ZnPcI₄ and differently sulfonated [⁶⁵Zn]ZnPcS (ZnPcS₄, ZnPcS₃, ZnPcS₂ and ZnPcS_1.75, a mixture of adjacent di and 25% mono) were prepared in order to study cell uptake and release kinetics in EMT-6 cells. The same compounds were evaluated for their in vitro phototoxicity and the biological parameters were compared to partition coefficients to arrive at quantitative structure-activity relationships (QSAR). At 1 μM in 1% serum, at 37°C, all dyes showed rapid cell uptake during the first hour followed by a slow accumulation phase. After 24 h, the highest cellular concentration was observed with the lipophilic ZnPcI₄, followed by the amphiphilic ZnPcS₂ and ZnPcS_1.75. The hydrophilic ZnPcS₄ and ZnPcS₃ showed lower uptake. Dye release from dyeloaded cells during incubation in dye-free medium could reach up to 60% and was shown to depend mainly on the amount of drug incorporated rather than the type of compound. These results suggest that care should be taken in interpreting dye toxicity data, which involve in vitro cell manipulations in dye-free medium, particularly during in vitro/in vivo protocols. The EMT-6 cell survival after 1 h or 24 h incubation with 1 μM dye in 1% serum followed by exposure to red light was assessed by means of the colorimetric 3-(4,5-dimethylthiazol-2-yl)-diphenyl-tetrazolium bromide (MTT) assay. Photocytotoxicities correlated inversely with the tendencies of the dyes to aggregate. Increased dye uptake by the cells also correlated with their activities, except for the lipophilic ZnPcI₄, which showed the highest cell uptake but little phototoxicity. The QSAR between phototoxicity and the log of the partition coefficients (phosphate-buffered saline and n-octanol) gave a parabola with optimal partition values corresponding to the adjacent sulfonated ZnPcS₂.     

A one-pot synthesis of functionalized 2,2-disubstituted 2H-1-benzopyrans

The synthesis of functionalized 2,2-disubstituted 2H-1-benzopyrans was achieved by condensing 2,3,5-trimethylhydroquinone (TMHQ) with ,β-unsaturated aldehydes or ,β-unsaturated acetals under acidic conditions.     

Application of relaxation periods during electrodialysis of a casein solution: Impact on anion-exchange membrane fouling

Electrodialysis (ED) is a membrane process used on a large scale. However, one of the common problems is fouling of ion-exchange membranes stacked in the cell. The use of pulsed power, consisting in applying a constant current density during a fixed time of application (T_on) followed by a pause duration (T_off), was demonstrated recently as an effective fouling mitigation method for electrodialysis. Up until now, no work has investigated the potential of electrodialysis using pulsed electric field on protein fouling. The aim of the present work was to study the influence of pulsed electric field (PEF) with a low frequency square shaped periodic signal (T_on = 10 s–T_off = 10 s, T_on = 10 s–T_off = 40 s) in comparison with dc current during electrodialysis of a casein solution at different current densities (10, 20 and 30 mA/cm²) on membrane fouling. It appeared from these results that PEF, under certain conditions of pulse, would avoid fouling on anion-exchange membranes. For 10 s–40 s pulsed electric field conditions, no fouling was observed with any density, while for 10 s–10 s PEF conditions, fouling appeared only at current density over 10 mA/cm². dc current, whatever the current density conditions, led to a fouling on the diluate side of the AEM. Furthermore, when fouling occurred, magnitude layer thickness and dry weight increased with the applied current density. The nature of the fouling was identified as 97% protein. The protein fouling would be due to the dissociation of water molecules and/or heat increase at the anion-exchange membrane interface. The relaxation time of the pulse would limit both phenomena on the membrane.     

Periodic Mesoporous Organosilica Nanoparticles for CO2 Adsorption at Standard Temperature and Pressure

(1) Background: Due to human activities, greenhouse gas (GHG) concentrations in the atmosphere are constantly rising, causing the greenhouse effect. Among GHGs, carbon dioxide (CO₂) is responsible for about two-thirds of the total energy imbalance which is the origin of the increase in the Earth’s temperature. (2) Methods: In this field, we describe the development of periodic mesoporous organosilica nanoparticles (PMO NPs) used to capture and store CO₂ present in the atmosphere. Several types of PMO NP (bis(triethoxysilyl)ethane (BTEE) as matrix, co-condensed with trialkoxysilylated aminopyridine (py) and trialkoxysilylated bipyridine (Etbipy and iPrbipy)) were synthesized by means of the sol-gel procedure, then characterized with different techniques (DLS, TEM, FTIR, BET). A systematic evaluation of CO₂ adsorption was carried out at 298 K and 273 K, at low pressure. (3) Results: The best values of CO₂ adsorption were obtained with 6% bipyridine: 1.045 mmol·g⁻¹ at 298 K and 2.26 mmol·g⁻¹ at 273 K. (4) Conclusions: The synthetized BTEE/aminopyridine or bipyridine PMO NPs showed significant results and could be promising for carbon capture and storage (CCS) application.     

Laser–Induced Fluorescence Detection of Carbamates Traces in Water

The absorption and fluorescence spectra of carbaryl (CB), carbofuran (CF) and carbendazim (MBC) have been studied. Fluorescence lifetime and fluorescence quantum yields are also reported as well as the influence of pH, solvent and presence of humic acids on fluorescence. The limit of detection (LD) of the three compounds has been measured by direct analysis by laser-induced fluorescence (LIF) using a pulsed YAG laser with an Optical Parametric Oscillator (OPO) as excitation source and an Intensified Charged Coupled Device (ICCD) camera for the fluorescence detection. Instrumental LD found for CB, for MBC and for CF are respectively 4, 50 and 1000 ng L⁻¹. In tap water, the LD obtained is 800 ng L⁻¹ for MBC and 20,000 ng L⁻¹ for CF. For CB, the use of a time shift between excitation and emission allows to reach a LD of 20 ng L⁻¹ in tap water.     

Temperature Dependence of 1H Paramagnetic Chemical Shifts in Actinide Complexes,Beyond Bleaney's Theory: The AnVIO22+–Dipicolinic Acid Complexes (An=Np,Pu) as an Example

Actinide +VI complexes ( = , and ) with dipicolinic acid derivatives were synthesized and characterized by powder XRD, SQUID magnetometry and NMR spectroscopy. In addition, and complexes were described by first principles CAS based and two-component spin-restricted DFT methods. The analysis of the ¹H paramagnetic NMR chemical shifts for all protons of the ligands according to the X-rays structures shows that the Fermi contact contribution is negligible in agreement with spin density determined by unrestricted DFT. The magnetic susceptibility tensor is determined by combining SQUID, pNMR shifts and Evans’ method. The SO-RASPT2 results fit well the experimental magnetic susceptibility and pNMR chemical shifts. The role of the counterions in the solid phase is pointed out; their presence impacts the magnetic properties of the complex. The temperature dependence of the pNMR chemical shifts has a strong contribution, contrarily to Bleaney's theory for lanthanide complexes. The fitting of the temperature dependence of the pNMR chemical shifts and SQUID magnetic susceptibility by a two-Kramers-doublet model for the complex and a non-Kramers-doublet model for the complex allows for the experimental evaluation of energy gaps and magnetic moments of the paramagnetic center.     

A Synthetic Substrate of DNA Polymerase Deviating from the Bases,Sugar, and Leaving Group of Canonical Deoxynucleoside Triphosphates

1. Download : Download high-res image (116KB)
2. Download : Download full-size image

Highlights? A highly modified nucleotide as substrate for polymerases ? The reversibility of the polymerase reaction at the template level ? Synthesis of a nucleoside with two anomeric centers     

N-Glycosidase treatment with 18O labeling and de novo sequencing argues for flagellin FliC glycopolymorphism in Pseudomonas aeruginosa

In prokaryote organisms, N-glycosylation of proteins is often correlated to cell–cell recognition and extracellular events. Those glycoproteins are potential targets for infection control. To date, many surface-glycosylated proteins from bacterial pathogens have been described. However, N-linked Pseudomonas surface-associated glycoproteins remain underexplored. We report a combined enrichment and labeling strategy to identify major glycoproteins on the outside of microorganisms. More precisely, bacteria were exposed to a mix of biotinylated lectins able to bind with glycoproteins. The latter were then recovered by avidin beads, digested with trypsin, and submitted to mass spectrometry. The targeted mixture of glycoproteins was additionally deglycosylated in the presence of H₂ ¹⁸O to incorporate ¹⁸O during PNGase F treatment and were also analyzed using mass spectrometry. This approach allowed us to identify a few tens of potential N-glycoproteins, among which flagellin FliC was the most abundant. To detect the possible sites of FliC modifications, a de novo sequencing step was also performed to discriminate between spontaneous deamidation and N-glycan loss. This approach led to the proposal of three potential N-glycosylated sites on the primary sequence of FliC: N26, N69, and N439, with two of these three asparagines belonging to an N-X-(S/T) consensus sequence. These observations suggest that flagellin FliC is a heterogeneous protein mixture containing both O- and N-glycoforms.