Thermische Zersetzung von CuInSe2, LiInSe2 und LiInTe2

The thermal decompositions of CuInSe₂, LiInSe₂ and LiInTe₂ in vacuum at high temperatures were studied by using TG/DTG coupled with mass spectrometry. For CuInSe₂, two steps were found to be significant. Up to 1000 °C Se₂ and In₂Se evaporate, followed later by Cu₂Se. The Li-containing compounds show similar behaviour. However, Li⁺ was already detected during the first step. Obviously, Li₂Se dissociates more readily than Cu₂Se. No Cu⁺ species were detected up to the complete evaporation of CuInSe₂.     

Imaging the activity of nitrate reductase by means of a scanning electrochemical microscope

Scanning electrochemical microscopy (SECM) was used to characterize immobilized nitrate reductase (NaR) from Pseudonomonas stutzeri (E.C. 1.7.99.4). Nitrate reductase with membrane fragment was embedded in a polyurethane hydrogel in a capillary and solubilized NaR without membrane fragment was covalently coupled to a diaminoethyl-cellulose-carbamitate film on glass. After systematic studies of possible mediators, SECM feedback imaging of both forms of immobilized NaR was accomplished with methylviologen as redox mediator.     

über Katalysatoren- und Fermentmodelle (1)

Ohne Zusammenfassung Die Arbeit wurde aus Mitteln des Marshall-Planes (ERP-Mittel) und mit Spenden aus dem „Fonds Chemie“ ausgeführt. Wir sprechen den zust?ndigen Stellen für die Gew?hrung der Beihilfe unseren verbindlichsten Dank aus. Der Deutschen Forschungsgemeinschaft danken wir für die überlassung einer Ultrazentrifuge, den Behring-Werken für die uns zur Verfügung gestellten Serumalbumin- und -globulin-Pr?parate.     

Über die Bestimmung der Richtung von Übergangsmomenten in länglichen Molekülen aus Messungen des IR-Dichroismus, 1. Mitt.: Grundlegende theoretische Behandlung

Zusammenfassung Es wird eine allgemeine Beziehung zwischen dem dichroitischen Verhältnis, dem Ausmaß der Orientierung und dem Winkel zwischen der Richtung des Übergangsmomentes und der Molekül-Längsachse abgeleitet. Mit dieser Beziehung ist es prinzipiell möglich, auch bei nicht vollständiger Orientierung der Moleküle eine genaue Bestimmung der Richtung von Übergangsmomenten vorzunehmen.

---

Determination of the direction of transition moments on oblong molecules by measurement of infrared dichroism, I

A general relation between dichroic ratio, degree of orientation and the angle between direction of transition moment and longitudinal axis of the molecule is derived. By this relation it will be possible in prineiple to determine exactly the direction of transition moments even when the molecules of the sample are only partially oriented.

---

---

Mit 3 Abbildungen     

IR-spektroskopische Untersuchungen wäßriger Lösungen mit Hilfe der ATR-Technik

The ATR-method is qualified for measuring aqueous solutions if the multiplereflection technique is used in such a way that strong water absorptions do not cover a large part of the information on the spectrum. The single-reflection technique is mainly suitable for solutions of 2-molar and higher concentrations. Organic acids, phenols, amides, saccharides and anorganic compounds had been measured. A practical example proved that there is the possibility of also taking quantitative measurements with the ATR-method.     

[3+2]-cycloreactions of 1,2-diacylcyclopropenes with ynamines. Aminofurane- versus aminocyclopentadiene-formation

Electron deficient 1,2-diacylcyclopropenes represent synthetic equivalent for both acylcarbenes and vinylcarbenes; in their cycloreaction with ynamines aminofuranes and/or aminocyclopentadienes are formed.     

Optimization of a wet chemical continuous flow analysis method exemplified by the determinations of kjeldahl nitrogen and total phosphorus

The optimization of a rather complex wet chemical analysis method, such as the measurement of Kjeldahl nitrogen or total phosphorus with the Technicon AutoAnalyzer, is extremely tedious when purely empirical approaches are used. A mathematical model of the different stages of the measuring method (digestion, neutralization and color reaction) is described. The system can then be optimized for maximum measuring sensitivity. Optimization is done by solving numerically the non-linear optimization problem with constraints. The starting values for the optimization algorithm were found by varying these values systematically within the tolerated range, with checks that none of the constraints were violated. The theoretical results predict an increase in sensitivity by a factor of 15 compared to the method used previously. In practice, the sensitivity was increased by a factor of 10 for the total phosphorus method. For the simultaneous low-level determinations of Kjeldahl nitrogen and total phosphorus some problems of stability remain.     

Beiträge zur Analyse nuklearer Rohmaterialien. X

Zusammenfassung Eine Methode wurde beschrieben, die es ermöglicht, Mangan von großen Mengen Uran zu trennen und der Endbestimmung mittels Spektrophotometrie zugänglich zu machen. Die Abtrennung des Mangans aus der Uranmatrix erfolgt durch Adsorption auf einer Säule des stark sauren Kationenaustauschers Dowex 50, X8 aus einer Mischung von 80 Vol.% Hexon, 10 Vol.% Aceton und 10 Vol.% 12-m Salpetersäure. Nach Elution des adsorbierten Mangans mittels 2-m Salpetersäure wird dieses unter Anwendung der Formaldoximmethode spektrophotometrisch bestimmt. Das Verfahren wurde zur Bestimmung des Mangans in U₃O₈-Standardproben (0,9 bis 8,1 ppm Mn) herangezogen und dabei eine sehr gute Übereinstimmung der Resultate erzielt.

---

Contributions to the analysis of nuclear raw materials. X

Summary A method has been described that makes possible to separate manganese from large amounts of uranium and to render possible the end-determination by means of spectrophotometry. The separation of the manganese and of the uranium material is conducted by adsorption on a column of the strongly acidic cation exchanger Dowex 50, X 8 from a mixture of 80 vol.% hexone, 10 vol.% acetone and 10 vol.% of 12M nitric acid. Following elution of the adsorbed manganese by means of 2M nitric acid the manganese is determined spectrophotometrically by employing the formaldoxime method. The method was employed for the determination of manganese in standard specimens of U₃O₈ (0.9 to 8.1 ppm manganese) and a very good agreement of the results was achieved.

     

Heavy metals in human urinary calculi

Summary Heavy metals are incorporated in human urinary calculi during a complex pathological process. The trace metals cadmium, lead, chromium, nickel and mercury are determined with regard to significance in pathogenesis and therapy. The amounts of cadmium, lead and chromium were determined as well directly in the solid sample as after chemical digestion by Zeeman-GFAAS. Both analyzing techniques show corresponding results. Nickel could be determined after chemical digestion only, while mercury was determined by a solid sampling technique. The evaluation of the results of trace metal analysis in the pilot study of 11 urinary calculi showed increased amounts of lead and cadmium compared to the results of tartar and salivary calculi.     

133Xe release during post-irradiation annealing of uranium metal in the presence of a constant volume of air

The fractional release of¹³³Xe at different temperatures was studied as a function of time in the presence of an atmosphere of air during post-irradiation annealing of uranium metal. It was found that the relation between the fractional release and t^1/2 is irregular. There is an initial step in the annealing curves (at the temperature range of 400–710°C) which decreases by increasing temperature and totally disappears at the high temperature of 800–1000 °C. The other parts of the release curves are typical for¹³³Xe release from uranium metal. The initial step was found to be due to the surface oxidation of uranium metal.