Adsorption of Molybdenum on Titania from Aqueous Solutions

The adsorption of Mo from dilute aqueous solutions (10(-3) to 3x10(-2) M) is effected on three samples of titania, two are anatase and the third is P25, which is composed of rutile and anatase. The adsorption isotherms at 298, 318, and 338 K are analyzed using a Langmuir linear equation. The isotherms on P25 showed a distinct inflection point that is reproduced by two linear portions, indicating different adsorption regimes. This adsorption behavior is explained as follows: with low amount adsorbed the adsorption is initiated by protonation of the basic hydroxyls on which the negatively charged MoO(4)(2-')s are adsorbed, and this is accompanied by an increase in the pH of the impregnating solution. At higher adsorption the coordinatively unsaturated Ti(4+) sites participate in the process, leading to a decline in the initial increase in pH. In the case of the two anatase samples the low surface area resulted in poor distribution of adsorption sites; consequently, the distinction between the two modes of adsorption was not entirely clear. The higher adsorption site density in the case of anatase is accompanied by a lower surface coverage, θ, than that for P25. The heat of adsorption, Q, on the three titania samples showed a linear increase with θ, which is represented by the regression equation: -Q=95.77θ-4.25 (R(2)=0.993). Copyright 2001 Academic Press.     

Synthesis and structural characterization of [PhE(BNMe2)2]2 (E = P or As): Six-Membered P2B4 and As2B4 Rings with Unusual Structures

The reaction of either Li₂PPh or Li₂AsPh with the diborane(4) derivative B₂(NMe₂)₂Br₂ affords the compounds [PhP(BNMe₂)₂]₂ ( 1 ) or [PhAs(BNMe₂)₂]₂ ( 2 ) in good yield. Both 1 and 2 have cyclic structures featuring non-planar P₂B₄ or As₂B₄ six-membered rings which have chair configurations. Although all four borons in each ring have planar coordination, the two phosphorus or arsenic centers have different degrees of pyramidalization. Bond distances within the rings indicate that the B? B, B? P or B? As bonds are single, whereas the exo-B? N bond lengths are consistent with significant π-bonding. The ring structures of 1 and 2 are in sharp contrast to the related boron-nitrogen species (t-BuN)₂N₄Me₄ which has a nido-N₂B₄ framework. The attempted synthesis of the nitrogen analogue of 1 or 2 by using a similar approach did not result in the isolation of [PhN(BNMe₂)₂]₂, instead the tetramino diborane(4) species [B(NMe₂)NHPh]₂ ( 3 ), which has a structure similar to other tetramine diborane(4) compounds, was isolated.     

Determination of avermectins in plasma at nanogram levels using high-performance liquid chromatography with flourescence detection

An analytical method is described for the determination of the avermectins in plasma based upon high-performance liquid chromatography of flourescent derivatives of these compounds. The analyte is isolated by adsorption chromatography on Florisil, dehydrated in an acetic anhydride-pyridine mixture, and the fluorophore is further separated by chromatorgraphy on silica gel in advance of introduction into a reversed-phase system. This method, which can be applied to samples containing as little as 0.2 ng drug per ml, has an accuracy of 5% mean relative error and a precision of 8% relative standard deviation. A study and discussion of several factors which affect the analytical reaction are included.     

The phase-dependent photochemical reaction dynamics of halooxides and nitrosyl halides

Recent progress in understanding the phase-dependent reactivity of halooxides and nitrosyl halides is outlined. Halooxide reactivity is represented by the photochemistry of chlorine dioxide (OClO) and dichlorine monoxide (ClOCl). The gas phase photochemical dynamics of OClO are contrasted with the dynamics in condensed environments. The role of excited-state symmetry in defining the reaction dynamics and the observation of photoisomerization resulting in the production of ClOO are discussed. The current understanding of the excited-state reaction dynamics of ClOCl and evidence for photoisomerization of this species resulting in the production of ClClO are outlined. Finally, the photochemical reaction dynamics of the nitrosyl halide ClNO are presented. The main difference between the gas and condensed phase reaction dynamics of this species is that whereas photodissociation to form Cl and NO dominates the gas phase reaction dynamics, photoisomerization resulting in ClON production occurs to an appreciable extent in condensed environments. The observation of photoisomerization for OClO, ClOCl and ClNO suggests that this process is a general feature of the condensed phase reaction dynamics for smaller halooxides and nitrosyl halides. Finally, future areas for study in both halooxide and nitrosyl halide photoreactivity are outlined.     

Synthesis of [4.2]cyclophanes

Vinyl $\text{p}$-xylylene cross-dimerizes with other xylylene-type intermediates to yield cycloadducts of the [8+6] and [6+6] type. This reaction provides a simple entry to the [4.2]paracyclophane system as well as the analogous [4.2]cyclophanes containing furan and pyrrole moieties.     

Amperometric biosensor for the rapid determination of salicylate in whole blood

A method for the determination of salicylate in whole blood is described. The assay uses salicylate hydroxylase to convert salicylate to catechol in the presence of NADH and molecular oxygen. The formation of catechol is monitored amperometrically by oxidation at +300 mV vs.Ag/AgCl and the size of the oxidation current is related to the concentration of salicylate in the sample. The reagents are incorporated into the working electrode of a disposable strip, allowing measurements to be made on a drop of blood within 1 min. The functional range of the assay can be extended to the equivalent of 7.2 mM plasma salicylate by incorporating benzoate as a component of the reaction system. The method has the advantages of simplicity and speed compared with standard procedures, and should prove especially useful in suspected overdose situations.     

A direct method for the substitution of imidazo[1,5-a]pyridines at position 5

3-Ethylthioimidazo[1,5-a]pyridine lithiates at carbon 5. Quenching of the anion with an electrophile followed by desulphurisation gives 5-substituted imidazo[1,5-a]pyridines.     

Transport and kinetics at microheterogeneous electrodes: Part V. The methylviologen/platinum system

Results are reported for the reaction of methylviologen radical cation, MV⁺ with platinum colloidal particles, studied by stopped flow spectrophotometry. The rate of the reaction depends on the gaseous pretreatment of the particles. For particles reduced by hydrogen, the kinetics are usually first order with respect to MV⁺. The reaction is also first order in the concentration of platinum, and is inhibited in a first order manner by the product MV²⁺. This inhibition suggests that MV²⁺ is adsorbed on the particle surfaces, and this has been confirmed by ac, ring—disc electrode studies on macroscopic platinum electrodes. At high concentrations of MV⁺ some deviation from first order kinetics is observed. These results are all explained by a kinetic model in which either the desorption of MV²⁺ or the adsorption of MV⁺ is the rate limiting process. The rate of consumption of MV⁺ on an oxidised surface is an order of magnitude faster than that on the reduced surface. Ring—disc studies show that this is because the MV⁺ is not producing H₂ but is reducing the surface oxide. The results are shown to fit a simple model which takes into account this titration of the oxide layer. The model also explains why the rate on partially oxidised surfaces will appear to have an order greater than one in [Pt].     

Biocatalytic reversible control of the stiffness of DNA-modified responsive hydrogels: applications in shape-memory,self-healing and autonomous controlled release of insulin

The enzymes glucose oxidase (GOx), acetylcholine esterase (AchE) and urease that drive biocatalytic transformations to alter pH, are integrated into pH-responsive DNA-based hydrogels. A two-enzyme-loaded hydrogel composed of GOx/urease or AchE/urease and a three-enzyme-loaded hydrogel composed of GOx/AchE/urease are presented. The biocatalytic transformations within the hydrogels lead to the dictated reconfiguration of nucleic acid bridges and the switchable control over the stiffness of the respective hydrogels. The switchable stiffness features are used to develop biocatalytically guided shape-memory and self-healing matrices. In addition, loading of GOx/insulin in a pH-responsive DNA-based hydrogel yields a glucose-triggered matrix for the controlled release of insulin, acting as an artificial pancreas. The release of insulin is controlled by the concentrations of glucose, hence, the biocatalytic insulin-loaded hydrogel provides an interesting sense-and-treat carrier for controlling diabetes.

Biocatalytic control over the stiffness of pH-responsive hydrogels is applied to develop shape-memory, self-healing and controlled release matrices.     

Comparisons of NMR spectral quality and success in crystallization demonstrate that NMR and X-ray crystallography are complementary methods for small protein structure determination

X-ray crystallography and NMR spectroscopy provide the only sources of experimental data from which protein structures can be analyzed at high or even atomic resolution. The degree to which these methods complement each other as sources of structural knowledge is a matter of debate; it is often proposed that small proteins yielding high quality, readily analyzed NMR spectra are a subset of those that readily yield strongly diffracting crystals. We have examined the correlation between NMR spectral quality and success in structure determination by X-ray crystallography for 159 prokaryotic and eukaryotic proteins, prescreened to avoid proteins providing polydisperse and/or aggregated samples. This study demonstrates that, across this protein sample set, the quality of a protein's [15N-1H]-heteronuclear correlation (HSQC) spectrum recorded under conditions generally suitable for 3D structure determination by NMR, a key predictor of the ability to determine a structure by NMR, is not correlated with successful crystallization and structure determination by X-ray crystallography. These results, together with similar results of an independent study presented in the accompanying paper (Yee, et al., J. Am. Chem. Soc., accompanying paper), demonstrate that X-ray crystallography and NMR often provide complementary sources of structural data and that both methods are required in order to optimize success for as many targets as possible in large-scale structural proteomics efforts.