Antibody properties for chemically reversible biosensor applications

A recently reported fiber-optic sensor based on a homogeneous fluorescence energy-transfer immunoassay operates in a continuous, reversible manner to quantify the anticonvulsant drug phenytoin (5,5-diphenylhydantoin). The chemical kinetics of the two simultaneous antibody-hapten (analyte) and antibody-hapten (labeled indicator) reactions in the sensor are now modeled mathematically. Simulation shows that the chemical response time is controlled by the dissociation rate constant and is independent of the association rate constant, and that an equalibrium chemical response can be achieved in minutes. The sensitivity and dynamic range of the analyte concentration which can be measured depends on the ratio of dissociation rate constants for the labeled and unlabeled hapten reactions, and on the total concentration of reactants in the sensor. The relative concentration ratios of antibody to labeled hapten has little impact on the sensitivity or dynamic range of the system, but can be optimized to provide the maximum amount of labeled hapten availble for instrumental measurement.     

Evidence for facile atropisomerism and simple (non-nucleophilic) biradical-forming cycloaromatization within kedarcidin chromophore aglycon

The kinetics and thermodynamics of atropisomerism within the protected kedarcidin chromophore aglycon 8, as well as a series of ansa-bridged synthetic intermediates leading to 8, were determined by 1H NMR spectroscopy. The data show that the ratio of atropisomeric forms of chloropyridine-bridged ansa intermediates is subject to wide variation with seemingly subtle structural variation. The vinyl bromide 4, for example, in the first X-ray structure determination of a kedarcidin ansa-bridged system, was found to exist as a single atropisomer in the solid state, but a nearly equal mixture (K = 0.70) of isomers in solution (t1/2 for isomer interconversion approximately 0.2 s at 20 degrees C). The aglycon 8, a 2.2:1 mixture of atropisomers, was found to undergo direct unimolecular biradical-forming cycloaromatization at ambient temperature in a mixture of 1,4-cyclohexadiene-benzene, without nucleophilic activation. The product 9 was formed as a single atropisomer (k = 2 x 10-4 s-1, t1/2 = 58 min, 81% yield), suggesting that the rate of atropisomerism within 8 is rapid with respect to cycloaromatization. The rate of cycloaromatization of 8 was found to be highly solvent-dependent, being more rapid in the presence of a good hydrogen-atom donor, consistent with the earlier model studies of Hirama et al. that showed that certain nine-membered cyclic (Z)-enediynes may equilibrate with their biradical cycloaromatization products. Incubation of 8 with beta-mercaptoethanol, under conditions mimicking experiments leading to DNA cleavage with kedarcidin, showed no evidence for nucleophilic activation. The product of direct cycloaromatization (9) was isolated instead. The evidence suggests that kedarcidin, like the enediyne agent C-1027, is capable of spontaneous thermal biradical formation without prior chemical activation.     

A short synthetic route to the calystegine alkaloids

An efficient strategy is described for the synthesis of enantiopure calystegine alkaloids. The key step employs a zinc-mediated fragmentation of benzyl-protected methyl 6-iodo-glycosides followed by in situ formation of the benzyl imine and Barbier-type allylation with zinc, magnesium, or indium metal. Stereochemistry in the pivotal allylation is controlled by the choice of the metal. The functionalized 1,8-nonadienes, thus formed, are converted into cycloheptenes by ring-closing olefin metathesis. Regioselective hydroboration and oxidation give the corresponding cycloheptanones, which are deprotected to afford the desired calystegines. Hereby, calystegine B(2), B(3), and B(4) are prepared from D-glucose, D-galactose, and D-mannose, respectively. This route constitutes the shortest synthesis of calystegine B(2) and gives rise to the first total syntheses of calystegine B(3) and B(4).     

Structural studies in main group chemistry : XIX. Organotin(IV) derivatives of tetracyanoethylene, 7,7,8,8-tetracyanoquinodimethane and 2,3,5,6-tetrachlorobenzoquinone. The isolation of stable organotin-substituted radicals

The reaction of organotin chlorides with the lithium salt of 7,7,8,8-tetracyanoquinodimethane (TCNQ) or hexaalkylditins with TCNQ yield stable organotin-substituted free radicals of the types R₃SnTCNQ^. (R = Me, n-Pr, n-Bu) and Me₂Sn(TCNQ^.)₂. The reaction of hexaphenylditin with TCNQ yields a (σ → π) charge transfer complex of stoichiometry (Ph₃SnSnPh₃)·TCNQ, whilst [Me₂SnCl(terpyridyl)⁺](TCNQ^-·) was isolated from the reaction of [Me₂SnCl(terpyridlyl)⁺][Me₂SnCl₃^-] and LiTCNQ. The oxidation of hexaalkylditins by tetracyanoethylene (TCNE) yields stable free radicals of the type R₃SnTCNE·, but treatment with 2,3,5,6-tetrachlorobenzoquinone yields either R₃SnOC₆Cl₄O·-p (R = Me) or R₃SnOC₆Cl₄OSnR₃-p (R = n-Bu, Ph). Tin-119 Mössbauer spectroscopy shows that the derivatives R₃SnTCNQ· and R₃TCNE· have trigonally-bipyramidally coordinated tin with planar [SnC₃] skeletons and bridging [TCNQ·] and [TCNE·] groups forming infinite one-dimensional chain structures. Me₃SnOC₆Cl₄O·-p was inferred to possess a similar structure but with oxy bridges forming chains with a Sn---O---Sn---O backbone. Me₂Sn(TCNQ·)₂ has a structure intermediate between tetrahedral and octahedral with a non-linear MeSnMe unit and anisobidentate chelation by two TCNQ groups. The TCNQ derivatives were of two types: (i) “green” or “brown”, indicative of delocalisation of the Ione electron over the cyanoquinone ligand, and (ii) a “blue” form in which spin-pairing of the Ione electron between adjacent organic groups takes place. Me₃SnTCNQ· may exist in both forms depending upon the mode of preparation.     

Synthesis of the tetrahydroisoquinoline alkaloid (+/-)-renieramycin G and A (+/-)-lemonomycinone analogue from a common intermediate

The total synthesis of tetrahydroisoquinoline alkaloids (+/-)-renieramycin G (4) and a lemonomycinone analogue (7) is described. A general strategy to synthesize both the mono- and bistetrahydroisoquinoline alkaloids from a common advanced intermediate, 17, is presented.     

Stokes/anti-stokes intensity ratio in the resonance region

Relative intensities of the Stokes and anti-Stokes Raman lines associated with the I-I stretching mode of I₂ and symmetric stretching mode of MnO^?₄ are presented. The data indicate that the maxima in the excitation profile of the anti-Stokes scattering are shifted from those of the Stokes scattering. The experimental Stokes/anti-Stokes intensity ratios agree with the theoretical values obtained with parameters from the electronic absorption spectra.     

The use of 90°-1,3-butadiene as a reference structure for the evaluation of stabilization energies for benzene and other conjugated cyclic hydrocarbons

Reactions are described that employ 90°-1,3-butadiene as a reference structure for the evaluation of the stabilization energyof the benzenoid and other cyclic conjugated hydrocarbons. The unique benefits of this rotamer of butadiene as a reference molecule within the homodesmotic conceptual framework are discussed. Experimental stabilization energies are presented for a number of cyclic hydrocarbons.     

Determination of lead in rocks by radiometric isotope dilution and substoichiometric extraction

A rapid procedure is described for the determination of lead in rocks by an isotope-dilution substoichiometric method. After the sample has been digested with acid in the presence of ²¹⁰Pb tracer, the lead is separated by dithizone extractions. After the lead has been back-extracted into aqueous solution, it is reacted with a substoichiometric amount of EDTA. Excess of unreacted lead is removed by extraction with dithizone in carbon tetrachloride, and the specific activity of the aqueous complex is determined by counting ²¹⁰Pb. The standard deviation of the method is less than 10 % for replicate determinations of lead in several U.S. Geological Survey standard rocks. The agreement with literature values indicates that the method is accurate.     

Enumeration of total yeasts and molds in foods by the SimPlate Yeast and Mold-Color Indicator method and conventional culture methods: collaborative study

The relative effectiveness of the SimPlate Yeast and Mold-Color Indicator method (Y&M-CI) was compared to the U.S. Food and Drug Administration's (FDA) Bacteriological Analytical Manual (BAM) method and the proposed International Organization for Standardization (ISO) method, ISO/CD 21527, for enumerating yeasts and molds in foods. Test portions were prepared and incubated according to the conditions stated in both the BAM and ISO methods. Six food types were analyzed: frozen corn dogs, nut meats, frozen fruits, cake mix, cereal, and fresh cheese. Nut meats, frozen fruits, and fresh cheese were naturally contaminated. All other foods were artificially contaminated with either a yeast or mold. Seventeen laboratories throughout North America and Europe participated in the study. Three method comparisons were conducted. In general, there was <0.3 mean log count difference in recovery between the SimPlate method and the 2 corresponding reference methods. Moreover, mean log counts between the 2 reference methods were also very similar. The repeatability (Sr) and reproducibility (SR) standard deviations were comparable between the 3 method comparisons. These results indicate that the BAM method and the SimPlate method are equivalent for enumerating yeast and mold populations in foods. Similarly, the SimPlate method is comparable to the proposed ISO method when test portions are prepared and incubated as defined in the proposed ISO method.     

Intra- and intermolecular complexation in C6 monoazacoronand substituted cyclodextrins

The preparation of 6(A)-deoxy-6(A)-(6-(2-(1,4,7,10-tetraoxa-13-azacyclopentadecan-13-yl)acetamido)hexylamino)-alpha-cyclodextrin, 3, 6(A)-deoxy-6(A)-(6-(2-(1,4,7,10,13-pentaoxa-16-azacyclooctadecan-16-yl)acetamido)hexylamino)-alpha-cyclodextrin, 4, and their beta-cyclodextrin analogues, 5 and 6, are described. (1)H (600 MHz) ROESY NMR spectra of the C(6) substituted beta-cyclodextrins, 5 and 6, are consistent with the intramolecular complexation of their azacyclopentadecanyl- and azacyclooctadecanyl(acetamido)hexylamino substituents in the beta-cyclodextrin annulus in D(2)O at pD = 8.5 whereas those of their alpha-cyclodextrin analogues, 3 and 4 are not complexed in the alpha-cyclodextrin annulus. This is attributed to the monoazacoronand components of the substituents being able to pass through the beta-cyclodextrin annulus whereas they are too large to pass through the alpha-cyclodextrin annulus. However, the substituents of 3 and 4 are intermolecularly complexed by beta-cyclodextrin to form pseudo [2]-rotaxanes. Metallocyclodextrins are formed by 5 through complexation by the monoazacoronand substituent component for which log (K/dm(3) mol(-1))= <2, 6.34 and 5.38 for Ca(2+), Zn(2+) and La(3+), respectively, in aqueous solution at 298.2 K and I= 0.10 mol dm(-3)(NEt(4)ClO(4)).