On the multiplicity and the Cohen-Macaulayness of fiber cones of graded algebras

Let A be a Noetherian local ring with the maximal ideal m and an m-primary ideal J. Let S=?_n≥0S_n be a finitely generated standard graded algebra over A. Set S⁺=?_n>0S_n. Denote by F_J(S)=?_n≥0→(S_n/JS_n) the fiber cone of S with respect to J. The paper characterizes the multiplicity and the Cohen-Macaulayness of F_J(S) in terms of minimal reductions of S⁺.     

Chemical and biological evaluation on scopadulane-type diterpenoids from Scoparia dulcis of Vietnamese origin

From the aerial parts of Scoparia dulcis L. (Scrophulariaceae) grown in Vietnam, four scopadulane-type diterpenoids (4-7), of which 7 is new and was given the trivial name scopadulcic acid C, together with nine known compounds were isolated. Their structures were elucidated by spectroscopic analyses. The absolute configurations of 4-7 were ascertained by applying the modified Mosher's method to iso-dulcinol (6). The isolation of the lignans nirtetralin and niranthin for the first time from S. dulcis is also of chemotaxonomic interest. The cytotoxic activity in KB cells, inhibitory effect on LPS/IFNgamma-induced NO production, inhibition of multidrug resistance (MDR), and antibacterial and antifungal activities of the scopadulane-type diterpenoids 4-7 were examined in this study.     

Two rapid methods for detection of Escherichia coli exceeding 10(4)/g action levels: precollaborative study

The current AOAC Method 966.24 for enumeration of Escherichia coli in foods uses a most probable number (MPN) procedure with extensive confirmation steps. Two new methods based on membrane filtration (MF) were compared to the MPN reference method for detection of high levels of E. coli in 5 food types, some of which represent categories for which the U.S. Food and Drug Administration (FDA) mandates additional testing if an action level of 10(4)/g E. coli is exceeded. Ground beef, which is not FDA regulated, was also tested. The 5 food types were all inoculated at 3 levels: 10(2)/g, > or = 10(4)/g, and > or = 10(5)/g E. coli. An MF protocol using either m-ColiBlue24 (CB) or lauryl sulfate tryptose plus BCIG (LST/BCIG) was an effective potential alternative to the reference method. Sensitivity and specificity for both CB and LST/BCIG were 98 and 100%, respectively. Agreement between MPN and both CB and LST/BCIG was 98%. The 2 proposed methods allow completion of both presumptive and confirmatory steps in 1-3 days, whereas the reference method requires as many as 11 days. Exclusivity testing with 50 non-E. coli strains indicated 100% were correctly ruled out by the proposed protocols. Inclusivity testing was used to determine whether typical results were obtained after incubation of E. coli cultures on CB or LST/BCIG for 24 h. Of 50 E. coli strains tested, 100% yielded typical results after incubation on CB, and 98% yielded typical results after incubation on LST/BCIG.     

Tuning of fiber lasers by use of a single-mode biconic fiber taper

We report a novel scheme to build a compact, tunable fiber laser. The tuning mechanism is based on the transmission property of a single-mode biconic fiber taper. While pulling the taper, we observe oscillations in the transmitted optical power that are due primarily to interference between a pair of excited modes within the tapered region, which are eventually coupled into the unstretched single-mode fiber at the end of the taper. A similar mechanism causes the modulation of the transmitted optical spectrum after the taper has been pulled and stabilized. It is this spectral modulation by the taper that is exploited here to control the wavelength of a fiber laser. The modulation can be adjusted by stretching the taper, thus enabling the tuning of the laser wavelength. We have built a 32 mW Er-doped tunable ring fiber laser with a continuous tuning range of over 20 nm and a signal-to-noise ratio of better than 45 dB over the entire tuning range; our output power is limited only by the available pump power.     

Community responses to road traffic noise in Hanoi and Ho Chi Minh City

Vietnam is a developing country in southeast Asia, and its environment has been seriously affected by industrialization and urbanization. In large cities like Hanoi (northern Vietnam) and Ho Chi Minh City (southern Vietnam), noise emission from road traffic has been found to be a serious concern among general public. In 2005 and 2007, two large-scale socio-acoustic surveys of community response to road traffic noise were conducted to investigate human reactions to road traffic noise in these cities; the sample sizes were 1503 people in Hanoi and 1471 in Ho Chi Minh City. The noise exposure levels (L_den) were 70–83 dB in Hanoi and 75–83 dB in Ho Chi Minh City. Noise annoyance was estimated using standardized annoyance scales. For both cities, dose–response relationships were established between L_den and the percentage of highly annoyed respondents. Compared to annoyance responses of European people, Vietnamese were less annoyed by road traffic noise by about 5 dB. Hanoi respondents seemed to be more annoyed by noise than Ho Chi Minh City respondents. Conversation and sleep disturbances were not as serious as expected in either city. Furthermore, window orientation in the home was found to affect activity disturbances.     

Advances in theoretical and experimental XAFS studies of thermodynamic properties,anharmonic effects and structural determination of fcc crystals

Thermodynamic properties, anharmonic effects and structural determination of fcc crystals have been studied based on the theoretical and experimental Debye–Waller factors presented in terms of cumulant expansion up to the third order, thermal expansion coefficient, X-ray absorption fine structure (XAFS) spectra and their Fourier transform magnitudes. The advances in these studies are performed by the further development of the anharmonic correlated Einstein model primary only for approximating three first XAFS cumulants into the method using that all the considered theoretical and experimental XAFS parameters have been provided based on only the calculated and measured second cumulants. The obtained cumulants describe the anharmonic effects in XAFS contributing to the accurate structural determination. Numerical results for Cu are found to be in good agreement with the experimental values extracted by using the present advanced method and with those obtained by the other measurements.     

Correlation between crystallinity and resistive switching behavior of sputtered WO3 thin films

The as-deposited WO₃ thin films were post-annealed at different temperatures (300 °C and 600 °C) in air to investigate a correlation between crystallinity and switching behavior of WO₃ thin films. Associating the results of XRD, FTIR, XPS and FESEM measurements, the annealing-caused crystallinity change contributes to the variation of the switching behaviors of the WO₃ thin films. The as-deposited WO₃ films with low crystalline structure are preferred for random Ag conducting path, resulting in large switching ratio but fluctuating I–V hysteresis, whereas the annealed WO₃ films with crystallized compact structure limits Ag conducting path, favoring the stable I–V hysteresis but small switching ratio. It is therefore concluded that electrochemical redox reaction-controlled resistance switching depends not only on electrode materials (inert and reactive electrodes) but also on crystallinity of host oxide.     

Efficient and continuous monoacylation with superior selectivity of symmetrical diamines in microreactors

Efficient and continuous monoacylation of symmetrical diamines performed in microreactors yielded superior selectivity to that predicted by statistical considerations. It is highly valuable that the kinetically controlled product in high yields was achieved without any special catalyst at ambient temperature.     

Heteroleptic FeII Complexes of 2,2′‐Biimidazole and Its Alkylated Derivatives: Spin‐Crossover and Photomagnetic Behavior

Three iron(II) complexes, [Fe(TPMA)(BIM)](ClO₄)₂?0.5H₂O ( 1 ), [Fe(TPMA)(XBIM)](ClO₄)₂ ( 2 ), and [Fe(TPMA)(XBBIM)](ClO₄)₂ ?0.75CH₃OH ( 3 ), were prepared by reactions of Fe^II perchlorate and the corresponding ligands (TPMA=tris(2‐pyridylmethyl)amine, BIM=2,2′‐biimidazole, XBIM=1,1′‐(α,α′‐o‐xylyl)‐2,2′‐biimidazole, XBBIM=1,1′‐(α,α′‐o‐xylyl)‐2,2′‐bibenzimidazole). The compounds were investigated by a combination of X‐ray crystallography, magnetic and photomagnetic measurements, and Mössbauer and optical absorption spectroscopy. Complex 1 exhibits a gradual spin crossover (SCO) with T_1/2=190 K, whereas 2 exhibits an abrupt SCO with approximately 7 K thermal hysteresis (T_1/2=196 K on cooling and 203 K on heating). Complex 3 is in the high‐spin state in the 2–300 K range. The difference in the magnetic behavior was traced to differences between the inter‐ and intramolecular interactions in 1 and 2 . The crystal packing of 2 features a hierarchy of intermolecular interactions that result in increased cooperativity and abruptness of the spin transition. In 3 , steric repulsion between H atoms of one of the pyridyl substituents of TPMA and one of the benzene rings of XBBIM results in a strong distortion of the Fe^II coordination environment, which stabilizes the high‐spin state of the complex. Both 1 and 2 exhibit a photoinduced low‐spin to high‐spin transition (LIESST effect) at 5 K. The difference in the character of intermolecular interactions of 1 and 2 also manifests in the kinetics of the decay of the photoinduced high‐spin state. For 1 , the decay rate constant follows the single‐exponential law, whereas for 2 it is a stretched exponential, reflecting the hierarchical nature of intermolecular contacts. The structural parameters of the photoinduced high‐spin state at 50 K are similar to those determined for the high‐spin state at 295 K. This study shows that N‐alkylation of BIM has a negligible effect on the ligand field strength. Therefore, the combination of TPMA and BIM offers a promising ligand platform for the design of functionalized SCO complexes.