Synthesis and Crystal Structure of KCuGd2S4: A Threedimensional Framework with Isolated Channels

The reaction of K₂S₅, Cu, Gd, and S in a 2 : 1 : 2 : 4 molar ratio at 450 °C yields yellow-orange needle-like cuboids of the new quaternary compound KCuGd₂S₄. The crystal structure represents a novel three-dimensional structure type of quaternary rare earth chalcogenides with alkali metal. The compound crystallizes in the orthorhombic space group Cmcm (No. 63) with a = 3.9921(1) Å, b = 13.523(3) Å, c = 13.802(3) Å, V = 745.1(3) ų, Z = 4. In the structure GdS₆ octahedra and CuS₄ tetrahedra are joined by common edges and corners forming corrugated layers parallel to (010). The GdS₆ octahedra are connected via common edges in the third dimension thus leading to the formation of a three-dimensional tunnel structure. The potassium cations are confined within the pentagonal shaped channels and are surrounded by eight sulfide anions each.     

Modification of polymers by adsorption phenomena

The adsorption of ions and amphiphilic molecules on solid polymers is investigated by direct force measurements using an atomic force microscope (AFM). It is shown that electrolyte ions are changing the surface potentials of the solid polymers as well as their adhesive properties. The experiments show that the interaction with a negatively charged probe is dramatically decreased by the adsorption of anions. The adsorption isotherms are determined by zeta potential measurements (streaming potential of flat plates). In presence of adsorbing anions, the attractive interaction and the adhesion are reduced and can be eliminated completely. So, even solutions of simple electrolyte ions can be applied intentionally in order to modify the interaction of polymer surfaces. A wide variety of technological applications becomes accessible.     

Size Matters! On the Way to Ionic Liquid Systems without Ion Pairing

Several, partly new, ionic liquids (ILs) containing imidazolium and ammonium cations as well as the medium‐sized [NTf₂]^? (0.230 nm³; Tf=CF₃SO₃^?) and the large [Al(hfip)₄]^? (0.581 nm³; hfip=OC(H)(CF₃)₂) anions were synthesized and characterized. Their temperature‐dependent viscosities and conductivities between 25 and 80 °C showed typical Vogel–Fulcher–Tammann (VFT) behavior. Ion‐specific self‐diffusion constants were measured at room temperature by pulsed‐gradient stimulated‐echo (PGSTE) NMR experiments. In general, self‐diffusion constants of both cations and anions in [Al(hfip)₄]^?‐based ILs were higher than in [NTf₂]^?‐based ILs. Ionicities were calculated from self‐diffusion constants and measured bulk conductivities, and showed that [Al(hfip)₄]^?‐based ILs yield higher ionicities than their [NTf₂]^? analogues, the former of which reach values of virtually 100 % in some cases.From these observations it was concluded that [Al(hfip)₄]^?‐based ILs come close to systems without any interactions, and this hypothesis is underlined with a Hirshfeld analysis. Additionally, a robust, modified Marcus theory quantitatively accounted for the differences between the two anions and yielded a minimum of the activation energy for ion movement at an anion diameter of slightly greater than 1 nm, which fits almost perfectly the size of [Al(hfip)₄]^?. Shallow Coulomb potential wells are responsible for the high mobility of ILs with such anions.     

Combining [Arene–Ru] with Azocarboxamide to Generate a Complex with Cytotoxic Properties

Azocarboxamide (azcH) has been combined for the first time with [Ru–Cym] to generate metal complexes with N,N‐ and N,O‐coordination mode, [(Cym)Ru(azc)Cl] and [(Cym)Ru(azcH)Cl]⁺[PF₆]^?. Geometric and electronic structures of the complexes are reported along with their in vitro activities against different tumour cell lines and preliminary results on solution chemistry. Compound [(Cym)Ru(azc)Cl] exhibited remarkable cytotoxic properties. It was cell‐type specific and had comparable IC₅₀ values towards both cancer cells and their drug‐resistant subline. A tenfold increase in the sensitivity towards [(Cym)Ru(azc)Cl] was noted for the tumour cells with depleted intracellular glutathione (GSH) level, suggesting the essential role of GSH in cell response to this compound.     

Thermal analysis of polyaniline poly(N-vinylpyrrolidone)-stabilized dispersions

The polyaniline dispersions stabilized with poly(N-vinylpyrrolidone) (PANI/PVP) were synthesized by oxidative polymerization with different mass ratios of PANI and PVP and different molar concentrations of the components in the polymerization mixture. The composite powders prepared from colloidal PANI/PVP dispersions were characterized by thermogravimetry and differential thermal analysis. The change in the ratio of PANI and PVP as well as the starting molar concentrations of aniline hydrochloride and oxidant has influence on the resulting properties of the dispersions. Concerning the doping, the results show that PANI/PVP powders are stable up to approximately 160 °C. Degradation of polymer chains starts at temperatures above 250 °C. The PANI/PVP composite powders with lower content of PANI exhibit slightly higher thermal stability. Further, colloidal PANI/PVP dispersions were screen-printed on aluminum foil for infrared spectroscopic characterization and on poly(ethylene terephthalate) foil for electrical measurements. The sheet resistance of printed layers measured by two-point probe was of the order of tens to thousands of kΩ sq^?1. The influence of both the change in the composition and the drying temperature is discussed.     

Recrystallization of 223Ra with barium sulfate

In this work, the kinetics of barium sulfate recrystallization has been studied in acidic 0.01 mol dm^?3 sodium sulfate solution using ²²³Ra and ¹³³Ba tracers at very low total radium concentration, i.e. less than 10^?13 mol dm^?3. It was found that the system follows the homogeneous recrystallization model and that recrystallization rates, inferred by the decrease of ²²³Ra and ¹³³Ba in the aqueous solution, are fast. Therefore, even at very low concentrations, below the solubility limit, radium will be retained by barium sulfate—a mineral present in the deep underground repository.     

Method development and inter-laboratory comparison about the determination of titanium from titanium dioxide nanoparticles in tissues by inductively coupled plasma mass spectrometry

Nanosized titanium dioxide (TiO₂) is one of the most interesting and valuable nanomaterials for the construction industry but also in health care applications, food, and consumer goods, e.g., cosmetics. Therefore, the properties associated with this material are described in detail. Despite its widespread use, the analytical determination and characterization of nanosized metal oxides is not as straightforward as the comparatively easy-to-detect metallic nanoparticles (e.g., silver or gold). This study presents the method development and the results of the determination of tissue titanium (Ti) levels after treatment of rats with the nanosized TiO₂. Total Ti levels were chosen to evaluate the presence and distribution of TiO₂ nanoparticles. A procedure consisting of incubation with a mixture of nitric acid (HNO₃) and hydrofluoric acid (HF), and heating was developed to digest tissues and TiO₂ nanomaterials in order to determine the total Ti content by inductively coupled plasma mass spectrometry (ICPMS). For the inter-laboratory comparison, altogether four laboratories analyzed the same samples upon digestion using the available ICPMS equipment. A major premise for any toxicokinetic study is the possibility to detect the chemical under investigation in biological samples (tissues). So, the study has to be performed with a dose high enough to allow for subsequent tissue level measurement of the chemical under investigation. On the other hand, dose of the chemical applied should not induce over toxicity in the animal as this may affect its absorption, distribution, metabolism, and excretion. To determine a non-toxic TiO₂ dosage, an acute toxicity study in rats was performed, and the organs obtained were evaluated for the presence of Ti by ICPMS. Despite the differences in methodology and independent of the sample preparation and the ICPMS equipment used, the results obtained for samples with Ti concentrations >4 μg Ti/g tissue agreed well.

Accessing New Chemical Entities through Microfluidic Systems

Flow systems have been successfully utilized for a wide variety of applications in chemical research and development, including the miniaturization of (bio)analytical methods and synthetic (bio)organic chemistry. Currently, we are witnessing the growing use of microfluidic technologies for the discovery of new chemical entities. As a consequence, chemical biology and molecular medicine research are being reshaped by this technique. In this Minireview we portray the state‐of‐the‐art, including the most recent advances in the application of microchip reactors as well as the micro‐ and mesoscale coil reactor‐assisted synthesis of bioactive small molecules, and forecast the potential future use of this promising technology.