Extraction of americium,lanthanides and some fission product elements by bidentate phosphonates

The extraction of Am, Eu, Ce(III), Zr(IV), and Sr from aqueous nitric acid— nitrate media by dibutyl N,N-diethylcarbamylphosphonate and dibutyl N,N-diethylcar-bamylmethylenephosphonate dissolved in carbon tetrachloride was studied. The trivalent actinide and lanthanide elements may be separated in certain aqueous phase acidity regions from Fe(III), Zr(IV), and Sr, whereas the separation of actinide elements from the lanthanide elements is poor. The extractant to metal ratio in the extracted complexes of Am, Eu, and Ce(III) is 3. The interferences in the extraction due to acidic impurities in the extracting agent are discussed.     

Parametrized convolutionless Generalized-Master-Equation approach to the exciton and electron propagation in the Agranovich and Galanin model

Expressing the influence of reservoirs (lattice modes, solvent etc.) on the exciton or electron propagation in homogeneous systems via two relaxation times in the Agranovich and Galanin model, the convolutionless Generalized Master Equations for the site occupation probabilities are derived. Two different projection operator techniques are used. Identity of the two approaches is verified for a dimer and physical contents of the result are discussed.     

Identifizierung von Aminen

2,4-Dinitrophenyl derivatives of amines (DNP-amines) were investigated by thin-layer chromatography and mass spectrometry. The fragmentation of the compounds upon electron impact is discussed. The investigations show that amines in their form as DNP-derivatives can be separated by TLC except for some critical pairs. From the mass spectra of the DNP-amines the structure of an amine can be elucidated so far that a quick and reliable identification is possible by comparison with authentic material and IR spectroscopy.     

Protein structure determination using long-distance constraints from double-quantum coherence ESR: study of T4 lysozyme

We report the use of a novel pulsed ESR technique for distance measurement, based on the detection of double quantum coherence (DQC), which yields high quality dipolar spectra, to significantly extend the range of measurable distances in proteins using nitroxide spin-labels. Eight T4 lysozyme (T4L) mutants, doubly labeled with methanethiosulfonate spin-label (MTSSL), have been studied using DQC-ESR at 9 and 17 GHz. The distances span the range from 20 A for the 65/76 mutant to 47 A for the 61/135 mutant. The high quality of the dipolar spectra also allows the determination of the distance distributions, the width of which can be used to set upper and lower bounds in future computational strategy. It is also demonstrated that the shape of these distributions can reveal the presence of multiple conformations of the spin-label, an issue of critical relevance to the structural interpretation of the distances. The distances and distributions found in this study are readily rationalized in terms of the known crystal structure, the characteristic conformers of the nitroxide side chains, and molecular modeling. This study sets the stage for the use of DQC-ESR for determining the tertiary structure of large proteins with just a small number of long-distance constraints.     

Photostabilizing activity of sterically hindered piperidines—II: Radical trapping ability

The abilities of both 2,2,6,6-tetramethylpiperidine (I) and its nitroxyl (II) to trap radicals involved in hydrocarbon photo-oxidations have been studied in cumene and 1,3,5-trimethylcyclohexane at 27° using AIBN, hydroperoxide and dialkylperoxide as initiators: the light was either the band 300–400 nm or 366 nm. Under conditions of photolysis of ROOH (degenerate branching), I is oxidized to II. II is capable of trapping R' radicals, the rate constant being ～50 times lower than that for RO^.₂ formation. RO^.₂ radicals react with neither I nor II. Under the condition of degenerate branching, II is capable of intercepting the radical fragments from decomposing hydroperoxide. The rate constant of this process is ～500 times higher than that for hydrogen abstraction by these fragments. A reaction mechanism is suggested: hydrogen bonded associates formed between an N-containing stabilizer and ROOH play a dominant role. The principal intermediates in this mechanism are represented by >NO^., >NOH and >NOR species.     

The immunosensors for measurement of 2,4-dichlorophenoxyacetic acid based on electrochemical impedance spectroscopy

Electrochemical impedance spectroscopy (EIS) was evaluated for the direct determination of herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). Specific antibody against 2,4-D was immobilised onto different gold electrodes. Several methods of antibody immobilisation by covalent linkage to modified surface were studied. Self-assembled monolayers formed using thiocompounds as cystamine, 4-aminothiophenol (ATPh), 3,3'-dithiopropionic acid di-(N-succinimidyl ester) (DTSP) and 11-mercaptoundecanoic acid (MUA) were chosen for the sensing surface activation. Three different sensor types were tested: screen-printed disc and finger-like structures and interdigitated array (IDA) electrodes produced by lithography. The measurements were carried out in a stationary arrangement, and the reaction between hapten and the immobilised antibody was observed online. Changes of impedance parameters were evaluated, and the best immobilisation technique (using 4-aminothiophenol) was chosen for further measurements. Impedance changes due to immunocomplex formation were evaluated, and the possibility of direct monitoring of 2,4-D binding to the antibody was demonstrated at a fixed frequency. For the strip sensor, the calibration curves were constructed in concentration range from 45 nmol l(-1) to 0.45 mmol l(-1) of 2,4-D.     

A top-down approach to protein structure studies using chemical cross-linking and Fourier transform mass spectrometry

In a preliminary communication we described a top-down approach to the determination of chemical cross-link location in proteins using Fourier transform mass spectrometry (FT-MS). We have since extended the approach to use a series of homobifunctional cross-linkers with the same reactive functional groups, but different cross-linker arm lengths. Correlating cross-linking data across a series of related linkers allows the distance constraint derived from a cross-link between two reactive side chains to be determined more accurately and increases the confidence in the assignment of the cross-links. In ubiquitin, there are seven lysines with primary amino groups and the amino terminus. Disuccinimidyl suberate (DSS, cross-linker arm length = 11.4 A), disuccinimidyl glutarate (DSG, cross-linker arm length = 7.5 A) and disuccinimidyl tartrate (DST, cross- linker arm length = 5.8 A) are homobifunctional cross-linking reagents that react specifically with primary amines. Using tandem mass spectrometry (MS/MS) on the singly, internally cross-linked precursor ion of ubiquitin, we found cross-links with DSS and DSG between the amino terminus and Lys 6, between Lys 6 and Lys 11, and between Lys 63 and Lys 48. Using disuccinimidyl tartrate (DST), the shortest cross-linker in the series, only the cross-links between the amino terminus and Lys 6, and between Lys 6 and Lys 11 were observed. The observed cross-links are consistent with the crystal structure of ubiquitin, if the lysine side chains and the amino terminus are assumed to have considerable flexibility. In a separate study, we probed the reactivity of the primary amino groups in ubiquitin using the amino acetylating reagent, N-hydroxy succinimidyl acetate (NHSAc), and a top-down approach to localize the acetylated lysine residues. The reactivity order obtained in that study (M1 approximate, equals K6 approximate, equals K48 approximate, equals K63) > K33 > K11 > (K27, K29), shows that the cross-link first formed in ubiquitin by reaction with DSS and DSG occurs between the most reactive residues.     

The relationship between differential thermal analysis data and the detonation characteristics of polynitroaromatic compounds

The thermal stabilities of 37 polynitroaromatic compounds are specified by means of non-isothermal DTA. The initial temperatures of the exotherms T_D, as well as the Piloyan decomposition activation energies, E, of the compounds are determined.A relationship is derived between ET^?1_D and the detonation characteristics of the compounds being measured. It is shown that allocation of the measured compounds to separate forms of the determined relationship is, in addition to thermochemical factors, also determined by the electron configuration and steric conditions in the reaction center of the given molecule.     

Rhodium(I) complexes with 1′-(diphenylphosphino)ferrocenecarboxylic acid as active and recyclable catalysts for 1-hexene hydroformylation

The rhodium complex trans-[Rh(CO)(Hdpf-κP)(dpf-κ²O,P)] (1), (Hdpf = 1′-(diphenylphosphino)ferrocenecarboxylic acid) was used as an efficient and recyclable catalyst for 1-hexene hydroformylation producing ca. 80% of aldehydes at 10 atm CO/H₂ and 80 °C. After the reaction, unchanged complex 1 was separated from the reaction mixture and used again three times with the same catalytic activity. The effect of modifying ligands, phosphines and phosphites, on the reactivity of 1 was investigated. The active catalytic systems containing 1 or trans-[Rh(CO)(L)(dpf-κ²O,P)] (2) were formed in situ from acetylacetonato rhodium(I) precursors [Rh(CO)₂(acac)] (3) or [RhL(CO)(acac)] (4) and Hdpf or Medpf (L = phosphine, Medpf = methyl ester of Hdpf).     

Surface patterns of block copolymers in thin layers after vapor treatment

A systematic study of formation of surface patterns in block copolymer thin layers after their exposure to solvent vapors was performed. The studied effect involves layers of thickness approximately equal to the ordering size of polymers - about 45 nm. Experiments were performed on three styrene - methacrylate derivative block copolymers, synthesized by living anionic polymerization: poly(4-octylstyrene)-block-poly(butyl methacrylate), poly(4-fluorostyrene)-block-poly(butyl methacrylate) and poly(p-octylstyrene)-block-poly(methyl methacrylate). The polymers were exposed to vapors of chloroform, 1,4-dioxane, hexane, acetone and tetrahydrofuran.