Polymerization of styrene started by free radicals,generated by external force action-chemical potential gradient of the swelling agent — on the PVC/solvent optical phase boundary

Summary There were studied the process of styrene polymerization in PVC swollen surface layer initiated by free radicals generated under the action of chemical potential gradient as an external force. It was found that conversion of styrene into the block copolymer is an diffusion controlled process.

---

Zusammenfassung Die Initiation des Prozesses der Polymerization von Styrol in den Oberflächenquellungsschichten von PVC wurde untersucht.Dabei wurde festgestellt, daß die freien Radikale, welche bei Zerreißung von spannungsbeanspruchten Bindungen, wie sie durch Einfluß von äußeren Kräften auf den Gradienten des chemischen Potentials des Quellungsmittels an Oberflächenquell bildungsmittel Polymer entstehen können, Polymerizationsprozesse des olefinischen Quellungsmittels initiieren können.

---

---

Dedicated to ProfessorV. Kellö in celebration of his 60th birthday.     

Ascorbate oxidase

Ascorbate oxidase fromCucurbita sp. was isolated by ammonium sulfate precipitation and DEAE-dextran-silochrome column chromatography. The thermal and pH stabilities of the purified enzyme were investigated. TheK _M forl-ascorbic acid (1.5 mM) and chlorohydroquinone (0.37 mM) was determined. Substrate specificity of ascorbate oxidase was investigated and compared with those of laccases fromCoriolus hirsutus andCerrena maxima. Ascorbate oxidase was covalently bound to a polymeric membrane and used in an enzyme electrode for ascorbic acid.     

Complex study of nickel skeleton catalysts: V. Study of novel non-pyrophoric nickel skeleton catalysts by derivatograph

The structure and properties of non-pyrophoric skeleton catalysts prepared from NiSi, NiAlSi, NiMg and NiZn alloys have been studied—apart from other thermal methods—by means of the derivatograph.Our experimental results have contributed to the explanation of the non-pyrophoric behaviour of these catalysts. We demonstrated that the desorption of the hydrogen content in our catalysts is not accompanied by the oxidation of active nickel. This oxidation takes place only at higher temperatures, above 200°C, at a rate proportional to the amount of active nickel.Other constituents of the catalysts (adsorbed water, hydroxide content) were also determined from the experimental data. The outstandingly high Mg(OH)₂ content of the NiMg catalyst indicates that its structure is dissimilar: Mg(OH)₂ also acts as support for the catalyst.     

ICP-MS determination of heavy metals in submerged cultures of wood-rotting fungi

Accumulation of five heavy metal ions by five species of wood-rotting basidiomycetes during a 9-day cultivation was studied. Contents of Cd, Cu, Pb, and Zn were measured using ICP-MS; the amount of mercury was determined directly in solid samples using the Advanced Mercury Analyser. A standard operation procedure for the sample preparation and determination of metal content was developed and validated. Presence of Cd, Cu, Hg, and Pb decreased the accumulation of zinc by the fungi. The basidiomycete Pycnoporus cinnabarinus exhibited the highest metal binding capacity of all fungi tested.     

Estimation scheme for level-dependent uncertainty of analytical result: application for determination of 1-hydroxypyrene in urine

The estimation scheme of uncertainty of determination of 1-hydroxypyrene (1-OHP) in urine was developed analysing the main stages of the analytical procedure: (1) preparation of 1-OHP standards, (2) creation of the calibration curve for the high performance liquid chromatography (HPLC) analysis method with the evaluation of recovery, (3) measuring procedure of aliquot of urine, (4) adjusting the pH of aliquot and hydrolysis with enzyme, (5) solid phase extraction, (6) concentration of the extract, (7) injection of the extract to chromatograph and analysing by the HPLC method, (8) calculation of 1-OHP mass from the calibration curve, (9) calculation of 1-OHP concentration in urine. The evaluation of the uncertainty is based on quantification of individual components. Combined uncertainty was calculated using the law of propagation of uncertainties according to the EURACHEM/CITAC guidelines. Level dependence of the uncertainty arises from the calibration curve. The limits of detection and quantification were found to be equal to 0.03 and 0.1 ng/mL, respectively. The calculated expanded level-dependent uncertainty covers 47–27–25% within the concentration range 0.03–0.1–0.4 ng/mL with the materials and equipment used. These parameters could easily be recalculated according to the proposed scheme if there are some changes in the analysis procedure.     

Polarography in solution of some problems in organic chemistry: recent applications

Applications of chromatographic and atomic absorption methods are compared with those of electroanalytical techniques. The limitations of electroanalytical procedures and their advantages, such as speed, sensitivity and speciation are discussed. Among applications of polarography and voltammetry to a solution of basic problems, attention has been paid to the possibility to distinguish the degree of conjugation (e.g. of compounds containing the grouping CNNC), to a contribution to understanding of solution chemistry of mitomycin C and to processes involved in the reduction of cephalosporins. Among practical applications, the possibility to analyze suspensions, which can be carried out without separation offers advantages. Examples are interactions in suspensions of bile salts in the presence of metal (II) ions, adsorptions of various pesticides and other toxic materials on lignin and the possibility to follow alkaline cleavage of lignin in buffers pH 8-12 at 25 °C. Most of these studies would not be possible to carry out using other techniques.     

Zwei neue pentacyclische dimere des cycloheptatriens

Titanium - catalyzed dimerization of cycloheptatriene affords pentacyclo[7.5.0.0^2,8.0^5,14.0^7,11]tetradeca-3,12-diene, $\text{3}$, and pentacyclo[8.4.0.0^3,7.0^4,14.0^6,11]tetradeca-8,12-diene, $\text{4}$. By heating, $\text{3}$ is converted quantitatively into $\text{4}$.     

Comparative thermal analysis of commercial and low-grade bauxites

This paper presents qualitative and quantitative comparative results on the simultaneous TG-DTG DTA of five commercial and low-grade bauxites. The methodology of qualitative determination of the basic mineral forms contained in bauxites is currently being established. The weight losses relating to the steps in the TG curve allow determination of the contents of the basic minerals in bauxite. These are recalculated as percentages of Al₂O₃, SiO₂, CaO moisture and total volatiles. The final results are in accordance with the results of classical chemical analyses, and this jusitifies the use of this technique as a quick method for qualitative and quantitative determinations of both commercial and low-grade bauxites.

---

Zusammenfassung Qualitative und quantitative Ergebnisse vergleichender simultaner TG-DTG-DTA-Untersuchungen an 5 kommerziellen und geringwertigen Bauxiten werden vorgestellt. Die Methodologie der qualitativen Bestimmung der wichtigsten im Bauxit enthaltenen Minerale wird ausgearbeitet. Die Gewichtsverluste bei den entsprechenden TG-Stufen erlauben die Berechnung der Gehalte an den wichtigsten Mineralen. Diese werden umgerechnet in die Anteile an Al₂O₃, SiO⁰², CaO, Feuchtigkeit und Glühverlust. Letztere Resultate stimmen mit denen klassisch-chemischer Analyse überein. Das erlaubt die Anwendung thermoanalytischer Methoden als Schnellverfahren für qualitative und quantitative Bestimmungen in kommerziellen und geringwertigen Bauxiten.

---

, . , . , , , . , , .

     

Determination of Mn,Fe, Cu,Zn, and Pb in particulate matter,raw and final materials of a brick factory by radionuclide X-ray fluorescence analysis

Radionuclide X-ray fluorescence method with a Si/Li semiconductor detector and²³⁸Pn exciting source was used in the study of Mn, Fe, Cu, Zn, and Pb content of solid emissions, raw and final materials of a brick factory. From the point of view of metal content, the working environment of the brick factory is safe for workers.     

Kinetics of the manganese(III)-oxalate reaction in acidic sulphate media

The kinetics of the reaction of manganese(III) with oxalic acid (OA) has been studied in H₂SO₄ solutions. Under the experimental conditions of 6 × 10^–3 <>₀ < 0.4=" mol=">^–3 and [H₂SO₄]₀ 0.2 mol dm^–3 the observed pseudo-first order rate constant k _obs follows the expression