Colloidal Surface Active Maghemite Nanoparticles for Biologically Safe CrVI Remediation: from Core‐Shell Nanostructures to Pilot Plant Development

The present study is aimed at the exploration of achievable improvements for Cr^VI ex situ and in situ water remediation by using novel naked colloidal maghemite (γ‐Fe₂O₃) nanoparticles (surface active maghemite nanoparticles, SAMNs). The reliability of SAMNs for Cr^VI binding and removal was demonstrated, and SAMN@Cr^VI complex was characterized, as well as the covalent nature of the absorption was unequivocally proved. SAMNs were structurally and magnetically well conserved after Cr^VI binding. Thus, in consideration of their affinity for Cr^VI, SAMNs were exploited in a biological model system, mimicking a real in situ application. The assay evidenced a progressive reduction of revertant colonies of Salmonella typhimurium TA100 strain, as maghemite nanoparticles concentration increased, till the complete suppression of Cr^VI mutagen effect. Finally, an automatic modular pilot system for continuous magnetic removal and recovery of Cr^VI from water is proposed. SAMNs, thanks to their colloidal, binding, and catalytic properties, represent a promising tool as a reliable nanomaterial for water remediation by Cr^VI.     

Fast simultaneous LC/MS/MS determination of 10 active compounds in human serum for therapeutic drug monitoring in psychiatric medication

A UPLC/MS/MS method with simple protein precipitation has been validated for the fast simultaneous analysis of agomelatine, asenapine, amisulpride, iloperidone, zotepine, melperone, ziprasidone, vilazodone, aripiprazole and its metabolite dehydro‐aripiprazole in human serum. Alprenolol was applied as an internal standard. A BEH C₁₈ (2.1 × 50 mm, 1.7 µm) column provided chromatographic separation of analytes using a binary mobile phase gradient (A, 2 mmol/L ammonium acetate, 0.1% formic acid in 5% acetonitrile, v/v/v; B, 2 mmol/L ammonium acetate, 0.1% formic acid in 95% acetonitrile, v/v/v). Mass spectrometric detection was performed in the positive electrospray ionization mode and ion suppression owing to matrix effects was evaluated. The validation criteria were determined: linearity, precision, accuracy, recovery, limit of detection, limit of quantification, reproducibility and matrix effect. The concentration range was as follows: 0.25–1000 ng/mL for agomelatine; 0.25–100 ng/mL for asenapine and iloperidone; 2.5–1000 ng/mL for amisulpride, aripiprazole, vilazodone and zotepine; 2.3–924.6 ng/mL for dehydroaripiprazole; 2.2–878.4 ng/mL for melperone; and 2.2–883.5 ng/mL for ziprasidone. Limits of quantitation below a therapeutic reference range were achieved for all analytes. Intra‐run precision of 0.4–5.5 %, inter‐run precision of 0.6–8.2% and overall recovery of 87.9–114.1% were obtained. The validated method was successfully implemented into routine practice for therapeutic drug monitoring in our hospital. Copyright © 2015 John Wiley & Sons, Ltd.     

Advanced Sensing of Antibiotics with Magnetic Gold Nanocomposite: Electrochemical Detection of Chloramphenicol

The sensing and accurate determination of antibiotics in various environments represents a big challenge, mainly owing to their widespread use in medicine, veterinary practice, and other fields. Therefore, a new, simple electrochemical sensor for the detection of antibiotic chloramphenicol (CAP) has been developed in this work. The amplification strategy of the sensor is based on the application of magnetite nanostructures stabilized with carboxymethyl cellulose (Fe₃O₄‐CMC) and decorated with nanometer‐sized Au nanoparticles (NPs) (Fe₃O₄‐CMC@Au). In this case, CMC serves as a stabilizing agent, preventing the aggregation of Fe₃O₄ NPs, and hence, enabling the kinetic barrier for electron transport to be overcome, and the Au NPs serve as an electron‐conducting tunnel for better electron transport. As a proof of concept, the developed nanosensor is used for the detection of CAP in human urine samples, giving a recovery value of around 97 %, which indicates the high accuracy of the as‐prepared nanosensor.     

Supercritical fluid extraction of amino acids from birch (Betula pendula Roth) leaves and their liquid chromatographic determination with fluorimetric detection

A method for supercritical fluid extraction (SFE) of amino acids was adapted and optimal experimental conditions were selected for a matrix consisting of dry leaves. The matrix-dependent SFE method uses a mixture of MeOH-H(2)O-acetonitrile (10:10:1 v/v/v) as a modifier (0.5 mL in situ, 300 muL on-line) at 70 degrees C and 40 MPa and no HCl is needed as an entrainer. The amino acids were quantified using high-performance liquid chromatography with fluorimetric detection (HPLC/FLD) after gradient elution on Zorbax Eclipse AAA columns (4.6x150 mm, 3.5 mum) with aqueous Na(2)HPO(4 )buffer of pH 7.8 and ACN-MeOH-water as a mobile phase. In comparison with Soxhlet extraction, SFE gave higher recovery and selectivity, but it required longer extraction time (90 min) and it was more labor-intensive (clean-up step after the pre-concentration). Both methods should be used separately or in combination according to the matrix, number of samples, and levels of ballast compounds.     

E2(CN)2 (E = S, Se) and related compounds

A synthetic, spectroscopic, and theoretical study of Ex(CN)2 (E = S, Se; x = 1-3) is described. The X-ray structures of Se2(CN)2 and Se3(CN)2 have been determined. Se2(CN)2 crystallizes in a chiral space group with the CN groups approximately gauche.     

Separation of phenolic acids by capillary electrophoresis with indirect contactless conductometric detection

A new method for the electrophoretic separation of nine phenolic acids (derivatives of benzoic and cinnamic acids) with contactless conductometric detection is presented. Based on theoretical calculations, in which the mobility of the electrolyte co- and counterions and mobility of analytes are taken into consideration, the electrolyte composition and detection mode was selected. This approach was found to be especially valuable for optimization of the electrolyte composition for the separation of analytes having medium mobility. Indirect conductometric detection mode was superior to the direct mode as predicted theoretically. The best performance was achieved with 150 mM 2-amino-2-methylpropanol electrolyte at pH 11.6. The separation was carried out in a counter-electroosmotic mode and completed in less than 6 min. The LODs achieved were about 2.3-3.3 microM and could be further improved to 0.12-0.17 microM by using a sample stacking procedure. The method compares well to the UV-Vis detection.     

Conformational flexibility of L-alanine zwitterion determines shapes of Raman and Raman optical activity spectral bands

Detailed analysis of Raman and Raman optical activity (ROA) of L-alanine zwitterion (ALAZW) revealed that shapes of the spectral bands are to a large extent determined by the rotation of the NH(3)(+), CO(2)(-), and CH(3) groups. Aqueous solution ALAZW spectra were measured down to 100 cm(-1) and compared to complex simulations based on ab initio (B3LYP/CPCM/6-31++G**) computations of molecular energies and spectral parameters. The bands exhibit different sensitivities to the motion of the rotating group; typically, for more susceptible bands the Raman signal becomes broader and the ROA intensity decreases. When these dynamical factors are taken into account in Boltzmann averaging of conformer contributions, simulated spectra not only better agree with the experiment, but shapes of the rotational potentials can be estimated. Effects of the molecular flexibility could be also demonstrated on differences in Raman spectra of the solution, crystalline, and glass (gellike) solid states of ALAZW. Experimental Raman and ROA spectra of four model dipeptides of different rigidities (Ala-Pro, Pro-Ala, Pro-Gly, and Gly-Pro) indicate that the broadening of spectral lines can be used as a general site-specific indicator of molecular rigidity or flexibility.     

Determination of neopterin, kynurenine, tryptophan and creatinine in human serum by high throuput HPLC

A new HPLC method for simultaneous determination of neopterin, creatinine, kynurenine and tryptophan in human serum was developed and validated. Monolithic stationary phase's technology (two monolithic columns RP-18e were connected with guard monolithic cartridge 4.6 mm × 50 mm + 3.0 mm × 100 mm and 4.6 × 10 mm) and special auto sampler for micro titration plates (samples are storage in dark cooled place protected against evaporation) were combined with easy sample preparation step. As mobile phase 15 mmol/L phosphate buffer at pH 4.50 was used. Neopterin and tryptophan were detected using fluorescent detection and kynurenine and creatinine were detected by diode-array detection. This method may be suitable for large sequences of samples in clinical research and routine practice.     

Introducing an amine group to calix[5]arene: comparison of several methods

Abstract

Chemists often use an amine group as an intermediate in syntheses of imines, amides and ureas; however, in the case of syntheses of p-aminophenol type compounds, several problems might occur. In this article, we prepared p-aminocalix[5]arene-pentaol by reduction of both nitro and azo derivatives, and compared four methods of the amine preparation, focusing mainly on its gramme scale and time-consuming issues.