Application of the method of images on electrostatic phenomena in aqueous Al2O3 and ZrO2 suspensions

A new solution for the Poisson equation for the diffuse part of the double layer around spherical particles will be presented. The numerical results are compared with the solution of the well-known DLVO theory. The range of the diffuse layer differs considerably in the two theories. Also, the inconsistent representation of the surface and diffuse layer charge in the DLVO theory do not occur in the new theory. Experimental zeta potential measurements were used to determine the charge of colloidal Al2O3 and ZrO2 particles. It is shown that the calculated charge can be interpreted as a superposition of independent H+ and OH- adsorption isotherms. The corresponding Langmuir adsorption isotherms are taken to model the zeta potential dependence on pH. In the vicinity of the isoelectric point the model fits well with the experimental data, but at higher ion concentrations considerable deviations occur. The deviations are discussed. Furthermore, the numerical results for the run of the potential in the diffuse part of the double layer were used to determine the electrostatic interaction potential between the particles in correlation with the zeta potential measurements. The corresponding total interaction potentials, including the van der Waals attraction, were taken to calculate the coagulation half-life for a suspension with a particle loading of 2 vol%. It is shown that stability against coagulation is maintained for Al2O3 particles in the pH region between 3.3 and 7 and for ZrO2 only around pH 5. Stability against flocculation can be achieved in the pH regime between 4.5 and 7 for Al2O3, while the examined ZrO2 particles are not stable against flocculation in aqueous suspensions.     

Development of a New Class of Inhibitors for the Malarial Aspartic Protease Plasmepsin II Based on a Central 7‐Azabicyclo[2.2.1]heptane Scaffold

Plasmepsin II (PMII), a malarial aspartic protease involved in the catabolism of hemoglobin in parasites of the genus Plasmodium, and renin, a human aspartic protease, share 35% sequence identity in their mature chains. Structures of 4‐arylpiperidine inhibitors complexed to human renin were reported by Roche recently. The major conformational changes, compared to a structure of renin, with a peptidomimetic inhibitor were identified and subsequently modeled in a structure of PMII (Fig. 1). This distorted structure of PMII served as active‐site model for a novel class of PMII inhibitors, according to a structure‐based de novo design approach (Fig. 2). These newly designed inhibitors feature a rigid 7‐azabicyclo[2.2.1]heptane scaffold, which, in its protonated form, is assumed to undergo ionic H‐bonding with the two catalytic Asp residues at the active site of PMII. Two substituents depart from the scaffold for occupancy of either the S1/S3 or S2′‐pocket and the hydrophobic flap pocket, newly created by the conformational changes in PMII. The inhibitors synthesized starting from N‐Boc‐protected 7‐azabicyclo[2.2.1]hept‐2‐ene ( 6 ; Schemes 1–5) displayed up to single‐digit micromolar activity (IC₅₀ values) toward PMII and good selectivity towards renin. The clear structure? activity relationship (SAR; Table) provides strong validation of the proposed conformational changes in PMII and the occupancy of the resulting hydrophobic flap pocket by our new inhibitors.     

Quenching of Flame Propagation with Heat Loss

The steady propagation of a planar laminar premixed flame, with a one-step exothermic reaction and linear heat loss, is studied. The corresponding travelling wave equations are solved numerically. The dependence of the flame velocity on the heat loss parameter is determined and compared with known results obtained by asymptotic expansion and other approximations. Due to the introduction of an ignition temperature the problem can be reduced to a bounded interval (of length L) and the graph of flame speed versus heat loss parameter can be parametrised by L. The numerical method is tested in the case of a step function nonlinearity when the exact solution of the differential equations can also be calculated.     

New structures in the bi­pyridine–copper(II) nitrate–methanol system: [(bpy)2Cu(NO3)]NO3·CH3OH and [(bpy)2Cu(NO3)]NO3

Reaction of 2,2′‐bi­pyridine (bpy) and copper(II) nitrate in methanol results in two complexes, namely light‐blue bis(2,2′‐bi­pyridine)­nitrato­copper(II) nitrate methanol solvate, [Cu(NO₃)(C₁₀H₈N₂)₂]NO₃·CH₃OH, (I), which is unstable in air, and the product of its decomposition, catena‐poly­[[[bis(2,2′‐bi­pyridine)copper(II)]‐μ‐nitrato‐O:O′] nitrate], {[Cu(NO₃)(C₁₀H₈N₂)₂]NO₃}_n, (II). The crystal structures of both compounds were determined from one crystal at room temperature. Later, the structure of (I) was redetermined at low temperature. In (I) and (II), the Cu atom is coordinated by two bpy and one or two nitrate ions, respectively. The second nitrate ion in (I), along with the methanol solvent mol­ecule, is found in the outer coordination sphere, not bonded to Cu. The nitrate in (I) is chelating, while in (II), it bridges (bpy)₂Cu complexes, forming a one‐dimensional chain structure. The Cu cation in (II) lies on a twofold axis and the uncoordinated NO₃^? ion is located close to a twofold axis and is therefore disordered. Compound (I) converts into (II) upon loss of solvent.     

Determination of vitamin C and preservatives in beverages by conventional capillary electrophoresis and microchip electrophoresis with capacitively coupled contactless conductivity detection

The separation and detection of commonly used preservatives (benzoate, sorbate) and vitamin C by both conventional CE and microchip electrophoresis with capacitively coupled contactless conductivity detection is presented. The separation was optimized by adjusting the pH-value of the buffer and the use of hydroxypropyl-beta-CD (HP-beta-CD) and CTAB as additives. For conventional CE, optimal separation conditions were achieved in a histidine/tartrate buffer at pH 6.5, containing 0.025% HP-beta-CD and 0.1 mM CTAB. LOD ranged from 0.5 to 3 mg/L (S/N = 3) and the RSDs for migration time and peak area were less than 0.1 and 2%, respectively. A considerable reduction of analysis time can be accomplished by using microchip electrophoresis without significant loss in sensitivity under optimal separation conditions. A histidine/tartrate buffer at pH 6.5, incorporating 0.06% HP-beta-CD and 0.25 mM CTAB, gave detection limits ranging between 3 and 10 mg/L and satisfactory reproducibilities of < or =0.4% for the migration time and < or =3.5% for the peak area. The methods developed are useful for the quantitative determination of food additives in real samples such as soft drinks and vitamin C tablets.     

Ion chromatographic analysis of cyanate in gold processing samples containing large concentrations of copper(I) and other metallocyanide complexes

An ion chromatographic (IC) method was developed for the determination of cyanate in gold cyanidation samples containing large concentrations of metallo-cyanide complexes. The analysis was performed on a Waters HC IC-Pak A anion-exchange column with an anthranilic acid eluent, with detection achieved using indirect UV at 355 nm. Two procedures were developed for removal of the metallo-cyanide complexes prior to the IC analysis. The first was a manual off-line method which used solid-phase extraction cartridges containing a strong anion-exchange resin to trap the complexes and to then enable determination of cyanate without interference. In the second approach, an automated on-line method was developed which used an anion-exchange guard column to trap the complexes and a column switching valve to allow backflushing of the cyanate from the guard column. This enabled the total analysis to be performed in a time of 10–14 min, depending on the sample composition. Finally, a comparison of results obtained by the standard Kjeldahl nitrogen method for cyanate and the IC method revealed an interference in the Kjeldahl method for samples containing large concentrations of Cu(I)-cyanide complexes.     

An Efficient Strategy to Orthogonally Protected (R)- and (S)-alpha-Methyl(alkyl)serine-Containing Peptides via a Novel Azlactone/Oxazoline Interconversion Reaction

A novel strategy for the synthesis of (R)- and (S)-alpha-methyl(alkyl)serine-containing peptides is presented. Using (S)-phenylalanine cyclohexylamide 6 as chiral auxiliary, the optically pure azlactones (R)- and (S)-2 were synthesized via a novel azlactone/oxazoline interconversion reaction (Figures 3 and 6). These azlactones constitute fully protected and activated synthetic equivalents of (R)- and (S)-alpha-methylserine and can be directly incorporated into peptides without further protective group manipulations. Like other alpha,alpha-dialkylated glycines, optically pure alpha-alkylserines can be used to stabilize beta-turn and alpha-helical conformations in short peptides.     

Resonant two photon ionization of phenanthrene via its transientS 2 state

We report the vibrationally resolved photoelectron spectrum of phenanthrene obtained by two photon ionization via theS ₂ electronic state. The experiments were performed with picosecond laser pulses with a bandwidth sufficiently large to span a significant fraction of the intermediate resonance state. Therefore the photoelectron spectrum is dominated by signal corresponding to the unrelaxed intermediate resonance, in spite of this state's 420 fs lifetime.     

Synthese von endo- und exo-1,3-Dimethyl-2,9-dioxa-bicyclo[3.3.1]nonan

Synthesis of endo- and exo-1,3-dimethyl-2,9-dioxabicyclo[3.3.1]nonane The synthesis of a host-specific substance in norway spruce infested by Trypodendron lineatum OLIV . is described (cf. scheme 1 and 2). Alkylation of the acetyl-acetone di-anion (II) with 3-methyl-3-buten-1-yl-bromide (I) followed by sodium boro-hydride reduction yields erythro- and threo-8-methyl-8-nonen-2,4-diol (IV and V) which are separated by chromatography. Their configurations were established by converting them under equilibrium conditions into one (VI) or two (VII and VIII) benzal derivatives. Oxidative cleavage with ozone of the terminal double bond in the erythro diol IV produces a dihydroxy ketone IX which spontaneously cyclizes to endo-1,3-dimethyl-2,9-dioxa-bicyclo[3.3.1]nonane (X). The threo diol V is converted by the same reaction sequence exclusively into exo-1,3-dimethyl-2,9-dioxa-bicyclo-[3.3.1]nonane (XII). Comparison of the NMR. data of the two acetals X and XII with that of the natural product establishes the endo configuration of the latter. A second, more convenient, synthesis of a mixture of the acetals X and XII starting from the bromo-acetal XIII is also reported.     

Isolation and Absolute Configuration of β,β-Carotene Diepoxide

The 5,6:5′,6′-diepoxy-5,6:5′,6;-tetrahydro-β,β-carotene, isolated from tubers of a white-fleshed variety of sweet potato (Ipomoea batatas LAM .) has been assigned the (5R,6S,5′R,6′S)-chirality on the basis of its HPLC, UV/VIS, and CD data.