Copper(I) and Gold(I) Complexes with N,N′‐Bis(diphenylphosphino)‐2,6‐diaminopyridine as Ligand: Synthesis and Molecular Structures

Reaction of CuI with 1 or 2 equivalent(s) N,N′‐Bis(diphenylphosphino)‐2,6‐diaminopyridine (BDDP) gives two different complexes, [Cu(I)μ‐(BDDP‐κP,N_py)]₂ ( 1 ) and [Cu(BDDP‐κP,N_py)₂]I ( 2 ), in high yields. The determination of the molecular structure show that both Cu^I atoms are tetrahedrally coordinated, rather than a square‐planar geometry reported for Cr⁰, Ni^II‐BDDP complexes before, which contains a planar tridentate chelate ring system. The introduction of AuCl(tht) (tht = tetrahydrothiophene) into [Cu(BDDP‐κP,N_py)₂]I leads unexpectedly to the formation of a digold complex 2,6‐[(ClAuPh₂P)HN]₂C₅H₃N and dimeric [Cu(I)μ‐(BDDP‐κP,N_py)]₂.     

Numerical simulation of DNA sample preconcentration in microdevice electrophoresis

A numerical model is presented for the accurate and efficient prediction of preconcentration and transport of DNA during sample introduction and injection in microcapillary electrophoresis. The model incorporates conservation laws for the different buffer ions, salt ions, and DNA sample, coupled through a Gaussian electric field to account for the field modifications that cause electromigration. The accuracy and efficiency required to capture the physics associated with such a complex transient problem are realized by the use of the finite element-flux corrected transport (FE-FCT) algorithm in two dimensions. The model has been employed for the prediction of DNA sample preconcentration and transport during electrophoresis in a double-T injector microdevice. To test its validity, the numerical results have been compared with the corresponding experimental data under similar conditions, and excellent agreement has been found. Finally, detailed results from a simulation of DNA sample preconcentration in electrophoretic microdevices are presented using as parameters the electric field strength and the other species concentrations. The effect of the Tris concentration on sample stacking is also investigated. These results demonstrate the great potential offered by the model for future optimization of such microchip devices with respect to significantly enhanced speed and resolution of sample separation.     

Pyrimidines,Part XXXI . Synthesis,reactions and properties of 6-acyl-1,3-dimethylpyrrolo[2,3-d]pyrimidine-2,4-diones

Acylations of 1,3-dimethyl- ( 1 ) and 1,3,7-trimethylpyrrolo[2,3-d]pyrimidine-2,4-dione ( 2 ) with anhydrides in the presence of trifluoroacetic acid proceed well to give in good yields the corresponding 7-acyl derivatives 3–11 . The 6-trichloroacetyl derivatives 5 and 6 are sensitive towards nucleophiles, which displace the trichloromethyl group easily by formation of the corresponding 6-carboxylic acid derivatives 12–23. The newly synthesized compounds have been characterized by elemental analysis, uv and ¹H nmr spectra and pK_a, determinations.     

Equilibria in complexes ofN-heterocyclic molecules,part XXII. The reaction of triaquo(2,4,6-tri-(2-pyridyl)-1,3,5-triazine) copper(II) and its nickel(II) and cobalt(II) analogues with water and hydroxide ion

Summary The kinetics of the reaction of [Cu(TPT)(H₂O)₃]²⁺ and [Ni(TPT)(H₂O)₃]²⁺ with H₂O have been followed and it has been shown that the formation of covalent hydrates is important in the understanding of these systems. The [Co(TPT)(OH)₃]^– compound and its Ni analogue are attacked by HO^– initially to form pseudo-base species and in, the case of Ni , the ligand then hydrolyses to yield a compound related to the carboximate formed when HO^– reacts with [Cu(TPT)(OH)₃]^–. In this reaction too, the formation of a pseudo-base, involving attack of HO^– at the triazine ring in the ligand is significant.Part XXI, ref. 2.     

Neue Derivate der 2-Acylamino-thiophen-(und-benzo[b]thiophen-)-3-carbonsäure sowie des ([1]Benzo-)Thieno[2,3-d]-pyrimidin-4(3H)-ons

The title substances1 and2 were prepared by acylation of the corresponding ethyl 2-amino-thiophene- (or:-4,5,6,7-tetrahydro-benzo[b]thiophene)-3-carboxylates, in some cases followed by reactions introducing a basic substituent.Additionally a group of 2-aroylamino-thiophene-(or:-4,5,6,7-tetrahydro-benzo[b]thiophene)-3-carboxamides was subjected to ring closure reactions, yielding the corresponding 2-aryl-thieno[2,3-d]pyrimidin-4(3H)-ones and 2-aryl-[1]benzothieno[2,3-d]pyrimidin-4(3H)-ones (both:3).

---

---

Zum Teil unter Mitarbeit vonFerdinand Fuhrmann     

Stereoselective Syntheses of Benz[f]isoindoline-Derivatives by Intramolecular Cycloadditions of Styrenes to Olefins

The N-allyl-N-cinnamyl amide 10 undergoes thermal cyclization to a 2:1-mixture of the trans- and cis-benz(f)isoindolines 11a and 12a . By comparison, the thermolysis of the corresponding bis-cinnamylamide 14 proceeds in a highly stereoselective manner to give the cis-fused[4+2]-adduct 16a . Similarly, the trans-fused stereoisomeric adducts 30a and 31a were obtained with high stereochemical control on heating the N-allyl-N-diphenylallyl amide 28 . The thermal transformations 4 → 5 + 6a and 17 → 18a + 20a show the competitive formation of [2+2]-adducts. An alternative approach to (substituted) benz[f]isoindolines 16 via the all-cis-isomer 24a has been developed. The described structures have been assigned on the basis of spectral evidence, chemical correlations and by X-ray-diffraction study of the isomer 16b . These results illustrate the utility of substituent interactions in order to direct intramolecular cyclo-additions at will towards either endo- or exo-products.     

Fused 1,2‐Dithioles. Part VII

The 1,2‐dithiolosultam derivative 14 was obtained from the (α‐bromoalkylidene)propenesultam derivative 9 (Scheme 1). Regioselective cleavage of the two ester groups (→ 1b or 2b ) allowed the preparation of derivatives with different substituents at C(3) in the dithiole ring (see 27 and 28 ) as well as at C(6) in the isothiazole ring (see 17 – 21 ; Scheme 2). Curtius rearrangement of the 6‐carbonyl azide 21 in Ac₂O afforded the 6‐acetamide 22 , and saponification and decarboxylation of the latter yielded ‘sulfothiolutin’ ( 30 ). Hydride reductions of two of the bicyclic sultams resulted in ring opening of the sultam ring and loss of the sulfonyl group. Thus the reduction of the dithiolosultam derivative 14 yielded the alkylidenethiotetronic acid derivative 33 (tetronic acid=furan‐2,4(3H,4H)‐dione), and the lactam‐sultam derivative 10 gave the alkylidenetetramic acid derivative 35 (tetramic acid=1,5‐dihydro‐4‐hydroxy‐2H‐pyrrol‐2‐one) (Scheme 3). Some of the new compounds ( 14, 22, 26 , and 30 ) exhibited antimycobacterial activity. The oxidative addition of 1 equiv. of [Pt(η²‐C₂H₄)L₂] ( 36a , L=PPh₃; 36b , L=1/2 dppf; 36c , L=1/2 (R,R)‐diop) into the S? S bond of 14 led to the cis‐(dithiolato)platinum(II) complexes 37a – c . (dppf=1,1′‐bis(diphenylphosphino)ferrocene; (R,R)‐diop={[(4R,5R)‐2,2‐demithyl‐1,3‐dioxolane‐4,5‐diyl]bis(methylene)}bis[diphenylphosphine]).     

Mutagenesis Mediated by Triple Helix–Forming Oligonucleotides Conjugated to Psoralen: Effects of Linker Arm Length and Sequence Context

Targeted mutagenesis and gene knock-out can be mediated by triple helix-forming oligonucleotides (TFO) linked to mutagenic agents, such as psoralen. However, this strategy is limited by the availability of homopurine/ homopyrimidine stretches at or near the target site because such sequences are required for high-affinity triplex formation. To overcome this limitation, we have tested TFO conjugated to psoralen via linker arms of lengths varying from 2 to 86 bonds, thereby designed to deliver the psoralen at varying distances from the third strand binding site present at the 3'end of the supFG1 mutation reporter gene. Following triplex formation and UVA irradiation, mutations were detected using an SV40-based shuttle vector assay in human cells. The frequency and distribution of mutations depended on the length of the linker arm. Precise targeting was observed only for linker arms of length 2 and 6, which also yielded the highest mutation frequencies (3 and 14%, respectively). Psoralen–TFO with longer tethers yielded mutations at multiple sites, with the maximum distance from the triplex site limited by the linker length but with the distribution within that range influenced by the propensity for psoralen intercalation at A:T base-pair-rich sites. Thus, gene modification can be extended beyond the site of third strand binding but with a decrease in the precision of the targeting.     

Time-dependent configuration-interaction calculations of laser-pulse-driven many-electron dynamics: controlled dipole switching in lithium cyanide

We report simulations of laser-driven many-electron dynamics by means of the time-dependent configuration interaction singles (doubles) approach. The method accounts for the correlation of ground and excited states, is capable of describing explicitly time-dependent, nonlinear phenomena, and is systematically improvable. Lithium cyanide serves as a molecular test system in which the charge distribution and hence the dipole moment are shown to be switchable, in a controlled fashion, by (a series of) laser pulses which induce selective, state-to-state electronic transitions. One focus of our time-dependent calculations is the question of how fast the transition from the ionic ground state to a specific excited state that is embedded in a multitude of other states can be made, without creating an electronic wave packet.     

Chemical Constituents and Antibacterial and Antifungal Activities of Two Aglaia Species

In the course of searching bioactive natural products from the plant genus Aglaia, we selected two species, A. cordata and A. testicularis, for further chemical study. Totally twenty natural compounds were obtained and structurally elucidated with which eleven of them were discovered for the first time. Among these compounds, lignans, rocaglamides,aglains and bisamides were the main constituents of the two plant species. The results from a bioactive screening indicated that some of the lignans possess potent antibacterial and antifungal activity.