Photoluminescence properties of Ba3B′B″2O9 (B′=Mg, Co or Zn and B″=Nb or Ta) ceramics with perovskite structure

Optical properties of near-stoichiometric compositions of Ba₃B′B″₂O₉ (B′=Mg, Co or Zn and B″=Nb or Ta) perovskite type materials were studied by means of photoluminescence (PL) spectroscopy. Ba₃B′B″₂O₉ perovskites belong to the family of perovskite materials that exhibit phase transition from a completely disordered system having space group Pm-3m to a 1:2 ordered one with space group P-3m1. As revealed by X-ray diffraction, deviation from stoichiometry results in the formation of Ba- and Nb-rich phases. Photoluminescence measurements demonstrated the presence of two broad peaks, the position of which depends on secondary phase formation: the first one, attributed to the disordered Pm-3m phase, is positioned at approximately 430 nm and the second band, positioned at lower energies (i.e., longer wavelengths, around 900 nm), was ascribed to the formation of the 1:2 ordered P-3m1 phase. The position of the first peak is influenced by the bond network through distortions in the local environment caused by the specific electronic structure of the B′ cation.     

Electron cyclotron resonance heating in a short cylindrical plasma system

Electron cyclotron resonance (ECR) plasma is produced and studied in a small cylindrical system. Microwave power is delivered by a CW magnetron at 2.45 GHz in TE¹⁰ mode and launched radially to have extraordinary (X) wave in plasma. The axial magnetic field required for ECR in the system is such that the first two ECR surfaces (B = 875.0 G andB = 437.5 G) reside in the system. ECR plasma is produced with hydrogen with typical plasma density n^e as 3.2 × 10¹⁰ cm^-3 and plasma temperature T^e between 9 and 15 eV. Various cut-off and resonance positions are identified in the plasma system. ECR heating (ECRH) of the plasma is observed experimentally. This heating is because of the mode conversion of X-wave to electron Bernstein wave (EBW) at the upper hybrid resonance (UHR) layer. The power mode conversion efficiency is estimated to be 0.85 for this system. The experimental results are presented in this paper.     

Coherent states of general time-dependent harmonic oscillator

By introducing an invariant operator, we obtain exact wave functions for a general time-dependent quadratic harmonic oscillator. The coherent states, both inx- andp-spaces, are calculated. We confirm that the uncertainty product in coherent state is always larger thankh/2 and is equal to the minimum of the uncertainty product of the number states. The displaced wave packet for Caldirola-Kanai oscillator in coherent state oscillates back and forth with time about the center as for a classical oscillator. The amplitude of oscillation with no driving force decreases due to the dissipation in the system. However, the oscillation with resonant frequency oscillates with a large amplitude, even after a sufficient time elapse.     

Errata: “Universality in Orthogonal and Symplectic Invariant Matrix Models with Quartic Potential”

The errata concern mainly the last computations for the universality of the local statistics of eigenvalues at the edge of the spectrum in parts (iii) of Theorems 2.3 and 2.4.     

A Color Appearance Model Applicable in Mesopic Vision

We propose a color vision model that can be used to predict color appearance in mesopic vision as well as photopic and scotopic vision. It is based on a two-stage model which consists of the cone and opponent stages and it assumes rod intrusion at the opponent stage. The model has the following features to describe the color appearance in mesopic vision. First, it includes a gradual and nonlinear shift in spectral luminous efficiency from V (LD) to V (LD) to cope with the spectral sensitivity difference between photopic and scotopic vision and the nonlinearity of rod influence on the luminance channel. Second, the model assumes decrease of the chromatic component with decreasing illuminance to explain the reduction of saturation at low illuminance levels. Third, it assumes that red/green and yellow/blue components change with illuminance levels independently, thus explaining hue shifts with decreasing illuminance. We applied the model for color appearance simulation of natural scenes in a mesopic visual environment.     

Actively mode-locked dual-wavelength fiber laser with close wavelength spacing using a fiber Bragg grating

A simple actively mode-locked fiber ring laser is proposed and successfully demonstrated to generate dual-wavelength picosecond pulses with close wavelength spacing using one Bragg grating in standard single-mode fiber. The proposed laser can be made to operate in stable dual-wavelength at room temperature, due to the birefringence characteristic of the FBG induced by transverse strain. Transverse strain loading on the FBG allows the wavelength spacing to be controlled. Generation of stable dual-wavelength pulses with a pulsewidth of 212–234 ps and a tunable wavelength separation from 0.2 to 0.44 nm at a pulse rate of 1.05 GHz was demonstrated.     

Static and dynamic properties of KCN<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Cl<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>

An extended three-body force shell model (ETSM) has been applied to investigate the static and dynamic properties of KCN _x Cl_1−x for the compositionx = 0.56 and 1.0 at 300 K. The phonon dispersion curves computed by us are compared with the single crystal neutron diffraction data. The unusual features of these curves are the upward curvature seen in some of the acoustic branches. This is a result ofK-dependent softening of the phonon due to translation-rotation coupling. The transverse acoustic branch is more soft near the zone centre.     

Electrical properties and memory effect in the field effect transistor based on organic ferroelectric insulator and pentacene

We have fabricated a field effect transistor (FET) based on an organic ferroelectric insulator and molecular conductor, and investigated the electrical properties and memory effects on the PEN-FET. We have observed a drastic change in the drain current at around the coercive electric fieldE _c of the organic ferroelectric insulator in not only a FET (PEN-FET) based on a pentacene (PEN) film but also a FET (IPEN-FET) based on an iodine doped PEN film. The magnitude of the change of the drain current for the IPEN-FET is 200 times larger than that for the PEN-FET. It is expected from these results that the PEN-FET (especially the IPEN-FET) is an improvement in such devices, since it operates at a low gate electric field accompanied by the appearance of the spontaneous polarization in the organic ferroelectric insulator. In addition, we have found that the drain current for the PEN-FET does not return to the initial drain current ofE _G =0 V/cm for more than one week, even if the gate electric field is changed to 0 V/cm from 500 V/cm(>E _c ). From these results, it is suggested that the PEN-FET becomes a memory device.     

Simulation model for shapiro time delay and light deflection experiments

The time delay experiment proposed by I.I. Shapiro in 1964 and conducted in the seventies was the most precise experiment of general relativity until that time. Further experimentation has improved the accuracy level of both the time delay and the light deflection experiments. A simulation model is proposed that involves only a simple mass and time transformation factor involving velocity of light. The light deflection and the time delay experiments are numerically simulated using this model that does not use the general relativistic equations. The computed values presented in this paper compare well with recent levels of accuracy of their respective experimental results.