P‐type tin‐oxide thin film transistors for blue‐light detection application

We reported the characteristics of p‐type tin‐oxide (SnO) thin film transistors (TFTs) upon illumination with visible light. Our p‐type TFT device using the SnO film as the active channel layer exhibits high sensitivity toward the blue‐light with a high light/dark read current ratio (I_light/I_dark) of 8.2 × 10³ at a very low driven voltage of <3 V. Since sensing of blue‐light radiation is very critical to our eyes, the proposed p‐type SnO TFTs with high sensitivity toward the blue‐light show great potential for future blue‐light detection applications.

     

Effects of low polymer content in a liquid-crystal microlens

A small number of bifunctional monomers are mixed with a nematic liquid crystal (LC) and cured with a distributed electric field, which is produced by a circular-hole-patterned electrode structure. A gradient type of lens, that is, a LC microlens, is investigated for various polymer concentrations. Addition of 3% polymer is enough to freeze the gradient-index properties of the structure in the form of a convex lens, and a polymer-stabilized LC microlens is demonstrated. Although a lower concentration of polymer cannot hold the distribution properties in a curing process, it can maintain the variable focus as a nematic material can. The polymer networks can also eliminate the disclination line that usually appears and causes the lens in this type of LC device to deteriorate.     

Repetition rate multipliers for efficient implementation of multiphoton and pump-probe fluorescence microscopy

With the advances in pulsed laser systems, microscopic imaging techniques such as multiphoton and pump-probe fluorescence microscopy have developed into effective tools for investigating intensity and time-resolved phenomena inside biological systems. However, pulsed lasers used in these techniques usually are commercial systems with repetition frequencies of around 80 MHz. While these systems have proven to be adequate for multiphoton and pump-probe microscopic imaging applications, the temporal separation of the laser pulse train (around 12.5 ns) is long compared to the fluorescence lifetimes of many common fluorescence species. In this work, we present the designs of repetition rate multipliers based on passive optical components that can be used to increase the efficiency in multiphoton and pump-probe fluorescence microscopy. Depending on the lifetime of fluorescence molecules under investigation, the passive repetition rate multiplier can increase the duty cycle of multiphoton or pump-probe microscopy up to fourfold.     

Spectral Domain Analysis of Coaxial Cavities

Coaxial cavities are used in high power gyrotrons as the beam-wave interaction structure. Much research has been devoted to their mode selective properties. A coaxial cavity lacks a sharp boundary at its open end, so it has some physical features that can only be observed using a spectral model, such as frequency-dependent field profiles and mode overlapping effects. These properties are important since cold tests are usually conducted in the frequency domain. This study applies the incident/reflected wave boundary condition to the wave equation of a weakly irregular coaxial waveguide. The resistivity of the wall is considered in the analysis. Calculations reveal that the fixed-position spectrum yields an uncertain resonant frequency and quality factor. Although the maximum-field spectrum can uniquely determine the properties of the coaxial cavity, the resonant frequency obtained using the maximum-field spectral model is inconsistent with that obtained using the temporal model. The field-energy spectrum explains the low Q nature of the coaxial cavity. Moreover, resonant frequencies evaluated using the field-energy spectrum agree precisely with those evaluated using the temporal model.     

Optically controlled seeding of Raman forward scattering and injection of electrons in a self-modulated laser-wakefield accelerator

Optical seeding of plasma waves and the injection of electrons are key issues in self-modulated laser-wakefield accelerators. By implementing a copropagating laser prepulse with proper timing, we are able to control the growth of Raman forward scattering and the production of accelerated electrons. The dependence of the Raman intensity on prepulse timing indicates that the seeding of Raman forward scattering is dominated by the ionization-induced wakefield, and the dependence of the divergence and number of accelerated electrons further reveals that the stimulated Raman backward scattering of the prepulse plays the essential role of injecting hot electrons into the fast plasma wave driven by the main pulse.     

Varactor-tuned gunn diode voltage controlled oscillator antenna array

A simple varactor tuned X-band Gunn diode VCO antenna array which is strongly coupled has been demonstrated. These arrays have the advantages of simple biasing circuit, no resistors required to eliminate multimode problem and suitable for monolithic integration circuit. Preliminary results show a maximum tuning range of 47MHz for 1×1 array and 170MHz for 2×2 array. In order to solve power combining heating problem, we move the backside metal forward and it becomes a microstrip form. The measured frequency and radiation patterns of these grid arrays agree very well with theoretical calculations.     

Utilization of four WDM channels with signal remodulation of OFDM-QAM for 10 Gb/s uplink passive optical networks

In this investigation, we experimentally investigate an extended reach (ER) time-division-multiplexed passive optical network (TDM-PON) using four wavelength-multiplexed channels to achieve 16 Gb/s downlink and 10 Gb/s uplink traffic. Each downlink signal uses the highly spectral efficient 4 Gb/s OFDM-QAM, and each uplink signal is generated by signal remodulating the downlink signal via a reflective semiconductor amplifier (RSOA) at 2.5 Gb/s non-return-to-zero (NRZ). In addition, the performance of the proposed ER TDM-PON has also been analyzed and discussed.     

Inclusion of SWCNTs in Nb/Pt co-doped TiO2 thin-film sensor for ethanol vapor detection

Nb-Pt co-doped TiO₂ and the hybrid SWCNTs/Nb-Pt co-doped TiO₂ thin films have been prepared by the sol–gel spin-coating process for gas-sensor fabrication. Field emission scanning electron microscope (FE-SEM, TEM and X-ray diffraction (XRD) characterizations indicated that the SWCNTs inclusion did not affect the morphology of the TiO₂ thin film and the particle size. Additionally, the SWCNTs were well embedded in the TiO₂ matrix. The gas-sensing properties of Nb–Pt co-doped TiO₂ thin films with and without SWCNTs inclusion were investigated. The hybrid sensors with the inclusion of different SWCNTs contents are examined to elucidate the effect of SWCNTs content on the gas-sensing properties. Experimental results revealed that the responses to ethanol of Nb–Pt co-doped TiO₂ sensors with SWNCTs inclusion increase by factors of 2–5 depending on the operating temperature and the ethanol concentration, compared to that of the sensor without SWCNTs inclusion. Moreover, all hybrid sensors can operate with high sensitivity and stability at a relatively low operating temperature (<335 °C). The responses of the hybrid sensors are greatly affected by SWCNTs content inclusion. The optimized SWCNTs content of 0.01% by weight was obtained for our experiment. The improved gas-sensing performance should be attributed to the additional formation of the p/n junction between SWCNTs (p-type) and TiO₂ (n-type).     

Millimeter-wave scattering from neutral and charged water droplets

We investigated 94 GHz millimeter-wave (MMW) scattering from neutral and charged water mist produced in the laboratory with an ultrasonic atomizer. Diffusion charging of the mist was accomplished with a negative ion generator (NIG). We observed increased forward- and backscattering of MMW from charged mist, as compared to MMW scattering from an uncharged mist. In order to interpret the experimental results, we developed a model based on classical electrodynamics theory of scattering from a dielectric sphere with diffusion-deposited mobile surface charge. In this approach, scattering and extinction cross-sections are calculated for a charged Rayleigh particle with effective dielectric constant consisting of the volume dielectric function of the neutral sphere and surface dielectric function due to the oscillation of the surface charge in the presence of applied electric field. For small droplets with radius smaller than 100 nm, this model predicts increased MMW scattering from charged mist, which is qualitatively consistent with the experimental observations. The objective of this work is to develop indirect remote sensing of radioactive gases via their charging action on atmospheric humid air.     

Sensitive and automated detection of iron-oxide-labeled cells using phase image cross-correlation analysis

Superparamagnetic iron oxide (SPIO) nanoparticles are increasingly being used to noninvasively track cells, target specific molecules and monitor gene expression in vivo. Contrast changes that are subtle relative to intrinsic sources of contrast present a significant detection challenge. Here, we describe a postprocessing algorithm, called Phase map cross-correlation Detection and Quantification (PDQ), with the purpose of automating identification and quantification of localized accumulations of SPIO agents. The method is designed to sacrifice little flexibility - it works on previously acquired data and allows the use of conventional high-SNR pulse sequences with no extra scan time. We first investigated the theoretical detection limits of PDQ using a simulated dipole field. This method was then applied to three-dimensional (3D) MRI data sets of agarose gel containing isolated dipoles and ex vivo transplanted allogenic rat hearts infiltrated by numerous iron-oxide-labeled macrophages as a result of organ rejection. A simulated dipole field showed this method to be robust in very low signal-to-noise ratio images. Analysis of agarose gel and allogenic rat heart shows that this method can automatically identify and count dipoles while visualizing their biodistribution in 3D renderings. In the heart, this information was used to calculate a quantitative index that may indicate its degree of cellular infiltration.