Can semi-empirical models describe HCl dissociation in water?

We discuss the failure of commonly used AM1 and PM3 semiempirical methods to correctly describe acid dissociation. We focus our analysis on HCl because of its physicochemical importance and its relevance in atmospheric chemistry. The structure of non-dissociated and dissociated HCl – (H₂O) _n clusters is accounted for. The very bad results obtained with PM3 (and also with AM1) are related to large errors in gas-phase proton affinity of water and gas-phase acidity of HCl. Indeed, estimation of pKa values shows that neither AM1 nor PM3 are able to predict HCl dissociation in liquid water since HCl is found to be a weaker acid than H₃O⁺. We have proposed in previous works a modified PM3 approach (PM3-MAIS) adapted to intermolecular calculations. It is derived from PM3 by reparameterization of the core–core functions using ab initio data. Since parameters for H–Cl and O–Cl core–core interactions were not yet available, we have carried out the corresponding optimization. Application of the PM3-MAIS method to HCl dissociation in HCl–(H₂O) _n clusters leads to a huge improvement over PM3 results. Though the method predicts a slightly overestimated HCl acidity in water environment, the overall agreement with ab initio calculations is very satisfying and justifies efforts to develop new semiempirical methods.     

Morphology,surface roughness,electron inelastic and quasielastic scattering in elastic peak electron spectroscopy of polymers

In elastic peak electron spectroscopy (EPES), the nearest vicinity of elastic peak in the low kinetic energy region reflects electron inelastic and quasielastic processes. Incident electrons produce surface excitations, inducing surface plasmons, with the corresponding loss peaks separated by 1–20 eV energy from the elastic peak. In this work, X‐ray photoelectron spectroscopy (XPS) and helium pycnometry are applied for determining surface atomic composition and bulk density, whereas atomic force microscopy (AFM) is applied for determining surface morphology and roughness. The component due to electron recoil on hydrogen atoms can be observed in EPES spectra for selected primary electron energies. Simulations of EPES predict a larger contribution of the hydrogen component than observed experimentally, where hydrogen deficiency is observed. Elastic peak intensity is influenced more strongly by surface morphology (roughness and porosity) than by surface excitations and quasielastic scattering of electrons by hydrogen atoms. Copyright © 2007 John Wiley & Sons, Ltd.     

Solid-phase spectrophotometric microdetermination of iron with ascorbic acid and ferrozine

 A very sensitive and selective method for the determination of trace amounts of iron has been developed, based on the reduction of Fe(III) to Fe(II) by ascorbic acid, followed by chromogenic chelation of Fe(II) with ferrozine. The complex Fe(II)-ferrozine is easily sorbed on a dextran-type anion-exchange gel packed in a 1 mm cell, and the absorbance of the gel is measured directly at 569 and 800 nm. The extended linear range of the determination is 0.5–10 ng ml^-1 of iron (apparent molar absorptivity=4.4×10⁷ l mol^-1 cm^-1) and the precision (RSD) 1.3% for a concentration of 5 ng ml^-1 of iron (n=10). The detection limit for a sample volume of 1000 ml, using 0.040 g of anion-exchanger, corresponds to 0.12 ng ml^-1. The method has been successfully applied to the determination of iron in natural and waste waters, wine, soil extract and previously digested vegetal tissues, drugs and human hair. Received: 20 November 1995/Revised: 23 January 1996/Accepted: 26 January 1996     

Effect of applied curent on copper sulphide-based ion-selective electrodes

The properties of precipitate-based copper sulphide electrodes are investigated. Solid-phase studies wre done by x-ray photoelectron spectroscopy and solution-phase studies by combined potentiometric and atomic absorptioni spectrometric techniques. The predominant valence state of copper in the copper sulphide samples is shown to be Cu(I), but Cu(II) can also be identified at the surfaces. The oxidation of the membrane surface results in dissolution of copper ion and a decrease in the Cu/S ratio in the solid phase; reduction of the surface causes sulphide dissolution and an increase in the Cu/S ratio. Application of anodic or cathodic curents was used to study the redox behaviour of the copper suphide memebrane.     

Cross-sections of 14 MeV neutron reactions producing short-lived nuclides

The cross-sections for the production of the short-lived nuclides:^26mAl,^197mAu,^136mBa,^79mBr,^139mCe,³⁴Cl,^167mEr,^114m3In,^114m2In,^38mK,^38mCl,²⁶Na,²⁰F,¹⁹²Re,^207mPb,^203mPb,^46mSc,^183mW,^90mZr obtained from (n, 2n), (n, n′), (n, alpha), (n,p) reactions using 14 MeV neutrons, were evaluated by the activation method. The experimental results of this work were compared with those obtained by other authors.     

Determination of the iron content of aluminate liquors from the Bayer alumina process by neutron activation analysis

The behaviour of iron in the Bayer process has been investigated by neutron activation analysis and Ge(Li) spectrometry, using bauxite samples of various origin. The amount of iron impurities in alumina was found to be independent of the origin of the bauxites. Alumina is contaminated by iron in the process of decomposition of aluminate liquors; regardless whether iron is present in ‘dissolved’ form or as a floating impurity, it will pass into the alumina almost completely.     

Joule heating in packed capillaries used in capillary electrochromatography

Effective heat dissipation is critical for reproducible and efficient separations in electrically driven separation systems. Flow rate, retention kinetics, and analyte diffusion rates are some of the characteristics that are affected by variation in the temperature of the mobile phase inside the column. In this study, we examine the issue of Joule heating in packed capillary columns used in capillary electrochromatography (CEC). As almost all commonly used CEC packings are poor thermal conductors, it is assumed that the packing particles do not conduct heat and heat transfer is solely through the mobile phase flowing through the system. The electrical conductivity of various mobile phases was measured at different temperatures by a conductivity meter and the temperature coefficient for each mobile phase was calculated. This was followed by measurement of the electrical current at several applied voltages to calculate the conductivity of the solution within the column as a function of the applied voltage. An overall increase in the conductivity is attributed to Joule heating within the column, while a constant conductivity means good heat dissipation. A plot of conductivity versus applied voltage was used as the indicator of poor heat dissipation. Using theories that have been proposed earlier for modeling of Joule heating effects in capillary electrophoresis (CE), we estimated the temperature within CEC columns. Under mobile and stationary phase conditions typically used in CEC, heat dissipation was found to be not always efficient. Elevated temperatures within the columns in excess of 23 degrees C above ambient temperature were calculated for packed columns, and about 35 degrees C for an open column, under a given set of conditions. The results agree with recently published experimental findings with nuclear magnetic resonance (NMR) thermometry, and Raman spectroscopic measurements.     

Lanthanide macrocyclic quinolyl conjugates as luminescent molecular-level devices.

The Eu(III) tetraazamacrocyclic complexes [Eu.1] and [Eu.2], and the Tb(III) and Yb(III) complexes [Tb.1] and [Yb.2], have been synthesized as luminescent molecular-level devices. The Eu complexes exhibit unique dual pH switching behavior in water under ambient conditions. The delayed Eu emission is reversibly switched on in acid, with an enhancement factor of several hundred for [Eu.1]. These observations are consistent with the protonation of the quinoline aryl nitrogen moiety (pK(a) approximately equal to 5.9 for [Eu.1]). The fluorescence emission spectra of these complexes are unaffected by acid, but pronounced changes occur in alkaline solution due to the deprotonation of the aryl amide nitrogen (pK(a) approximately 9.4 for [Eu.1]). [Tb.1] shows a more intriguing pH dependence; Tb emission is switched "on" only in the presence of H+ and in the absence of molecular oxygen, whereas the fluorescence emission properties are similar to those observed with [Eu.1]. This behavior can be conveniently described as a molecular-level logic gate, corresponding to a two-input INHIBIT function, A wedge B'. The analogous [Yb.2] complex shows no such pH or O(2) dependence.     

On the origin of Turing instability

A reaction–diffusion system consisting of one, two or three chemical species and taking place in an arbitrary number of spatial dimensions cannot exhibit Turing instability if none of the reaction steps express cross‐inhibition. A corollary of this result – obtained by elementary calculations – underlines the importance of nonlinearity in the formation of stationary structures, a kind of self‐organization on a chemical basis. Relations to global stability of reaction–diffusion systems, and results on multispecies systems are also mentioned. The statements are not restricted to mass action type models. As a by‐product, the solution of a basic inverse problem of formal kinetics is also presented which extends a previous result by Hárs and Tóth (1981) to models with arbitrary – including rational – functions as reaction rates so often occurring, e.g., in enzyme kinetics. This revised version was published online in July 2006 with corrections to the Cover Date.     

FTIR study of CO adsorption on molybdena-alumina catalysts for surface characterization

CO adsorption at low temperature has been used to probe Lewis acid sites created upon dehydroxylation of γ-Al₂O₃ and reduction of Mo/Al₂O₃ catalysts, using Fourier Transform Infrared spectroscopy (FTIR). Carbon-monoxide adsorption on γ-Al₂O₃ and Mo/Al₂O₃ catalysts dehydroxylated and reduced at different temperatures was studied at 78 K by IR spectroscopy. However, our results indicate that there is an approximately linear correlation between the increase either of dehydroxylation or the extent of reduction of the catalysts and the increasing absorbance of CO due to CO adsorption on Lewis acid sites created upon dehydroxylation of γ-Al₂O₃ and reduction of Mo/Al₂O₃.