Analysis by gas chromatography-mass spectrometry of the essential oils from the aerial parts of Pimpinella anagodendron Bolle and Pimpinella rupicola Svent., two endemic species to the Canary Islands, Spain

The essential oils from the aerial parts of Pimpinella anagodendron Bolle and Pimpinella rupicola Svent., two endemic species growing in Tenerife, Canary Islands, Spain, were studied by gas chromatography and gas chromatography-mass spectrometry. The major components of the flowering tops (flowers+unripe fruits) of P. rupicola (PRFT) were found to be beta-bisabolene (34.8%), limonene (10.9%) and alpha-zingiberene (10.5%), whereas in the flowering tops of P. anagodendron (PAFT), the main constituents were alpha-zingiberene (32.9%), beta-bisabolene (17.9%), beta-pinene (15.8%) and ar-curcumene (11.5%). The major compounds found in the stems+leaves of P. rupicola (PRSL) were beta-bisabolene (31.6%), alpha-zingiberene (11.4%) and limonene (10.8%), whereas those of P. anagodendron (PASL) were alpha-zingiberene (32.3%), beta-bisabolene (14.0%) and ar-curcumene (12.6%). In all the oils were found the characteristic constituents of genus Pimpinella, the pseudoisoeugenol esters. In accordance with the morphological, chorological and chemical differences between both species, we suggest that P. rupicola Svent. is a good taxon and not a synonym of P. anagodendron.     

Determination of alkylphenol and alkylphenolethoxylates in biota by liquid chromatography with detection by tandem mass spectrometry and fluorescence spectroscopy

A quantitative method for the simultaneous determination of octylphenol, nonylphenol and the corresponding ethoxylates (1 to 5) in biota is presented. Extraction methods were developed for egg and fish matrices based on accelerated solvent extraction followed by a solid-phase extraction cleanup, using octadecylsilica or aminopropyl cartridges. Identification and quantitation were accomplished by liquid chromatography-electrospray tandem mass spectrometry (LC-MS-MS) and compared to the traditional liquid chromatography with fluorescence spectroscopy detection. LC-MS-MS provides high sensitivity and specificity required for these complex matrices and an accurate quantitation with the use of 13C-labeled internal standards. Quantitation limits by LC-MS-MS ranged from 4 to 12 ng/g in eggs, and from 6 to 22 ng/g in fish samples. These methods were successfully applied to osprey eggs from the Chesapeake Bay and fish from the Great Lakes area. Total levels found in osprey egg samples were up to 18 ng/g wet mass and as high as 8.2 microg/g wet mass in the fish samples.     

First derivative spectrophotometry for individual and simultaneous determination of magnesium(II) and copper(II) using emodin(1,3,8-trihydroxy-6-methylanthraquinone) as reagent

First derivative spectrophotometry are presented in comparison with simple spectrophotometric method for Cu(II) and Mg(II) determination with emodin in alkaline pH range. The molar absorptivity at the lambda(max) of 572 nm and 553 nm for Cu(II) and Mg(II) are 5.5 x 10(3) and 3.9 x 10(3) lit/mol/cm, respectively. Zero crossing measurement technique is found suitable for the simultaneous determination of the metal ions. The interference effects, statistical analyses and limits of detection are also reported.     

Two- and three-dimensional cadmium-organic frameworks with trimesic acid and 4,4'-trimethylenedipyridine

Three novel cadmium-organic frameworks built-up from 1,3,5-benzenetricarboxylate anions (HXBTC(x-3)) and 4,4'-trimethylenedipyridine (TMD) have been hydrothermally synthesized, and characterized using single-crystal X-ray diffraction, thermoanalytical measurements, elemental analysis, and IR and Raman spectroscopies: [Cd(HBTC)(TMD)(2)].8.5H(2)O (I), [Cd(HBTC)(TMD)(H(2)O)].4.5H(2)O (II), and [Cd(2)(BTC)(TMD)(2)(NO(3))].3H(2)O (III), with structures I and II being isolated as a mixture of crystals. Structure I contains an undulating infinite two-dimensional [Cd(HBTC)(TMD)(2)] framework, with a (4,4) topology and rectangular pores, ca. 3.4 x 11.0 A in cross-section, distributed in a herringbone manner. The crystal structure of I is obtained by parallel packing of this 2D framework in an [ABAB.] fashion. Compound II has a porous 3D diamondoid framework with channels running in several directions of the unit cell, which allows 2-fold interpenetration to occur. The most prominent channels are distributed in a brick-wall fashion along the c axis and have a cross-section of ca. 3.2 x 13.2 A. Structure III can be seen as the three-dimensional assembly of binuclear secondary building units (SBU), which leads to a compact, neutral, and coordinatively bonded eight-connected framework, [Cd(2)(BTC)(TMD)(2)(NO(3))], exhibiting an unusual 3(6)4(22) topology. The increased flexibility of the TMD ligands (brought about by the three methylene groups between the two 4-pyridyl rings) can lead, for the same reactive system, to a large variety of crystal architectures.     

Synthesis and H+, Cu2+, and Zn2+ coordination behavior of a bis(fluorophoric) bibrachial lariat aza-crown

The synthesis, protonation behavior, and Cu2+ and Zn2+ coordination chemistry of the novel bibrachial aza lariat ether (naphthalen-1-ylmethyl)[2-(20-[2-[(naphthalen-1-ylmethyl)amino]ethyl]-3,6,9,17,20,23,29,30-octaazatricyclo[23.3.1.1*11,15*]triaconta-1(29),11(30),12,14,25,27-hexaen-6-yl)ethyl]amine (L) are discussed. The macrocycle, which has two aminoethyl naphthyl moieties symmetrically appended to a 2:2 azapyridinophane structure, displays, in the pH range 2-11, six protonation steps that correspond to the protonation of the secondary amino groups. Steady-state fluorescence measurements show emissions due to the monomer and to the excimer formed between the two naphthalene fragments of the macrocycle. The time-resolved fluorescence data, obtained by the time-correlated single photon counting technique, show that a significant percentage of excimer is preformed as ground-state dimers. The ligand L forms with the metal ions Cu2+ and Zn2+ mono- and dinuclear complexes in aqueous solution. The influence of metal coordination in the fluorescence emission of L is analyzed. The acid-base, coordination capabilities, and emissive behavior of L are compared with those presented by its synthetic precursor L1, which has a tripodal tris(2-aminoethyl)amine structure functionalized at one of its terminal amino groups with a naphthyl moiety.     

A novel one‐dimensional coordination polymer with Cd2+ and diethylenetriaminepentaacetic acid

catena‐Poly­[[[bis­[di­aqua(4,4′‐bi­pyridine)­cadmium(II)]‐bis­[μ‐(N′′‐carboxy­methyl­diethyl­enetri­amine‐N,N,N′,N′′‐tetra­ace­ta­to)­cadmium(II)]]‐μ‐4,4′‐bi­pyridine] tetradecahydrate], [Cd₄­(C₁₄H₁₉N₃O₁₀)₂(C₁₀H₈N₂)₃(H₂O)₄]·14H₂O or [Cd₄(HD­TPA)₂(BPY)₃(H₂O)₄]·14H₂O, where BPY is 4,4′‐bi­pyridine and HDTPA^4? is N′′‐carboxy­methyl­diethyl­enetri­amine‐N,N,N′,N′′‐tetra­acetate, consists of a one‐dimensional coordination polymer formed from a secondary building unit which comprises four Cd centres. The chain structure of the title compound was obtained by the use of a multidentate organic ligand, N,N,N′,N′′,N′′‐diethyl­enetri­amine­penta­acetic acid (H₅DTPA), which forms multiple chelate rings with the Cd metal centres. An extended network is formed via hydrogen bonds.     

Polyesters analogous to PET and PBT based on O‐benzyl ethers of xylitol and L‐arabinitol

The synthesis, characterization, and some properties of new copolyesters of poly(butylene terephthalate) (PBT) and poly(ethylene terephthalate) (PET) based on L ‐arabinitol and xylitol are described. These copolyesters were obtained by polycondensation reaction in the melt of mixtures of 1,4‐butanediol or ethylene glycol and 2,3,4‐tri‐O‐benzyl‐L ‐arabinitol or 2,3,4‐tri‐O‐benzyl‐xylitol with dimethyl terephthalate. Their weight‐average molecular weights ranged between 7000 and 55,000, with polydispersities ranging from 1.4 to 4.7. Copolymers containing 1,4‐butanediol could be analyzed by NMR, and were found to have a statistical microstructure. All these copolyesters were thermally stable, with degradation temperatures well above 300 °C. With increasing amounts of alditol in the copolyester, the melting temperature and crystallinity decreased in both series, and the glass transition temperature increased for the PBT series and decreased for the PET series. Only PBT‐derived copolyesters containing a maximum of 10% alditol units showed discrete scattering characteristic of crystalline material. No substantial differences in either structure or properties were observed between the L ‐arabinitol and xylitol copolyester series. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5167–5179, 2008     

Structure and electrical transport properties of the ordered skutterudites MGe1.5S1.5 (M=Co, Rh, Ir)

High-resolution powder neutron diffraction data collected for the skutterudites MGe_1.5S_1.5 (M=Co, Rh, Ir) reveal that these materials adopt an ordered skutterudite structure (space group R3¯), in which the anions are ordered in layers perpendicular to the [111] direction. In this ordered structure, the anions form two-crystallographically distinct four-membered rings, with stoichiometry Ge₂S₂, in which the Ge and S atoms are trans to each other. The transport properties of these materials, which are p-type semiconductors, are discussed in the light of the structural results. The effect of iron substitution in CoGe_1.5S_1.5 has been investigated. While doping of CoGe_1.5S_1.5 has a marked effect on both the electrical resistivity and the Seebeck coefficient, these ternary skutterudites exhibit significantly higher electrical resistivities than their binary counterparts.