Synthesis and characterisation of coating polyurethane cationomers containing fluorine built-in hard urethane segments

Polyurethane cationomers were synthesised in the reaction of 4,4’-methylenebis(phenyl isocyanate) with polyoxyethylene glycol (M?= 2,000) or poly(tetrafluoroethyleneoxide-co-difluoromethylene oxide) α,ω-diisocyanate and N-methyl diethanolamine. Amine segments were built-in to the urethane-isocyanate prepolymer in the reaction with 1-bromobutane or formic acid, and then they were converted to alkylammonium cations. The obtained isocyanate prepolymers were then extended in the aqueous medium that yielded stable aqueous dispersions which were applied on the surfaces of test poly(tetrafluoroethylene) plates. After evaporation of water, the dispersions formed thin polymer coatings. ¹H, ¹³C NMR and IR spectral methods were employed to confirm chemical structures of synthesised cationomers. Based on ¹H NMR and IR spectra, the factors κ and α were calculated, which represented the polarity level of the obtained cationomers. The DSC, wide angle X-ray scattering and atom force microscopy methods were employed for the microstructural assessment of the obtained materials. Changes were discussed in the surface free energy and its components, as calculated independently according to the method suggested by van Oss–Good, in relation to chemical and physical structures of cationomers as well as morphology of coating surfaces obtained from those cationomers. Fluorine incorporated into cationomers (about 30%) contributed to lower surface free energy values, down to about 15 mJ/m². That was caused by gradual weakening of long-range interactions within which the highest share is taken by dispersion interactions.     

Photochemical Hydrogen Storage with Hexaazatrinaphthylene

When irradiated with violet light, hexaazatrinaphthylene (HATN) extracts a hydrogen atom from an alcohol forming a long-living hydrogenated species. The apparent kinetic isotope effect for fluorescence decay time in deuterated methanol (1.56) indicates that the lowest singlet excited state of the molecule is a precursor for intermolecular hydrogen transfer. The photochemical hydrogenation occurs in several alcohols (methanol, ethanol, isopropanol) but not in water. Hydrogenated HATN can be detected optically by an absorption band at 1.78 eV as well as with EPR (electron paramagnetic resonance) and NMR techniques. Mass spectrometry of photoproducts reveal di-hydrogenated HATN structures along with methoxylated and methylated HATN molecules which are generated through the reaction with methoxy radicals (remnants from alcohol splitting). Experimental findings are consistent with the theoretical results which predicted that for the excited state of the HATN-solvent molecular complex, there exists a barrierless hydrogen transfer from methanol but a small barrier for the similar oxidation of water.     

Electron scattering on C6F6 and SF6 molecules

Total absolute cross sections for electron scattering on hexafluorobenzene, C₆F₆, and sulfur hexafluoride, SF₆, molecules, have been measured as a function of impact energy from 0.6 to 250 eV. The total cross section for C₆F₆ exhibits a very broad peak stretching from 10 to 100 eV with some weak features near 9.5 and 15 eV superimposed on the peak. Apart from the well-known low-energy resonant structures in the SF6 total cross section function, a new weak resonant feature close to 25 eV has been noticed in the present experiment, in accordance with earlier theoretical calculations.     

Pressure-induced effects in the heterogeneous adsorption of insulin on chromatographic surfaces

The effect of increasing the average column pressure (ACP) on the heterogeneous adsorption of insulin variants on a C18-bonded silica was studied in isocratic reversed-phase HPLC. Adsorption isotherm data of lispro and porcine insulin obtained for values of the ACP ranging from 57 to 237 bar were fitted to the Langmuir-Freundlich and the Tóth equation. The resulting isotherm parameters, including the equilibrium adsorption constant and the heterogeneity index, were next used for the calculation of distribution functions characterizing the energy of interactions between the adsorbed insulin molecules and the stationary phase. It was observed that increasing the pressure by 180 bar causes a broadening of the distribution functions and a shift of the position of their maximum toward lower interaction energies. These findings suggest that, under high pressures, the insulin molecules interact with the stationary phase in a more diversified way than under low pressures. Additionally, the most probable value of the energy of the insulin-surface interactions becomes lower when the ACP increases. The pressure-induced changes in the interaction of insulin variants with the hydrophobic surface are attributed to a possible conformational flexibility of the molecular structure of this protein.     

Surface properties of the binary mixed systems of alkylpyridinium halides and sodium alkylsulfonates

Surface properties of the binary mixed systems of decyl- and dodecylpyridinium chloride or bromide and sodium pentyl- and heptylsulfonate have been investigated. The surface tension of solutions of equimolar mixtures of surfactants and individual surfactants was measured, and the composition of mixed monolayers and surface interaction parameter β were calculated with the regular solution theory. Our results indicate that the properties of mixed films depend on both ionic strength and the kind of added inorganic electrolyte. With the increase of inorganic electrolyte concentration, the content of more surface active ions in the adsorption films enhances and is the highest in the presence of NaI and the smallest when solutions contain NaCl. Mutual interactions in mixed adsorbed films were found to be attractive. However, the strength of interaction weakens with the increase of ionic strength and depends on the kind of inorganic ions in the order: Cl⁻>Br⁻>I⁻.     

Beyond Oxides: Nitride as a Ligand in a Neutral IrIXNO3 Molecule Bearing a Transition Metal at High Oxidation State

Theoretical calculations utilizing relativistic ZORA Hamiltonian point to the conceivable existence of an IrNO₃ molecule in C_3v geometry. This minimum is shown to correspond to genuine nonavalent iridium nitride trioxide, which is a neutral analogue of cationic [IrO₄]⁺ species detected recently. Despite the presence of nitride anion, the molecule is protected by substantial barriers exceeding 200 kJ mol⁻¹ against transformations leading, for example, to global minimum (O=)₂Ir−NO, which contains metal at a lower formal oxidation state.     

Preliminary thermal characterization of natural resins from different botanical sources and geological environments

The preliminary studies on thermal behavior of differently aged natural resins from Russia (Khatanga), Dominican Republic (El Valle), Colombia and Poland (Jantar) were performed. Thermal stability and behavior under elevated temperature were investigated by thermogravimetry (TG) and differential scanning calorimetry (DSC), while the differences in the structure and composition by FT-IR spectroscopy. Analyzed resins show different thermal effects during heating suggesting that possible post-reactions and structural changes occurred. TG results indicated that Dominican, Russian and Colombian resins present relatively high thermal stability under air conditions in the range of 228–300 °C, whereas the mass loss of 5mass% at about 217 °C was observed for Baltic amber. During DSC experiments, the analyzed resins expose thermal events which make impossible determination of glass transition temperature in a raw sample. The results indicate that both TG and DSC cannot be considered as methods for age dating of natural resins and more advanced techniques should be applied. Careful analysis of FT-IR data in the carbonyl region may provide additional information about the composition and history of the natural resin.

     

Crystal structures and magnetic properties of two low-dimensional materials constructed from [Mn(III)(salen)H2O]+ and [M(CN)8](3-/4-) (M = Mo or W) precursors

The syntheses, X-ray structures, and magnetic behaviors of two new cyano-bridged assemblies, the molecular [Mn(III)(salen)H2O]3[W(V)(CN)8].H2O (1) and one-dimensional [Mn(salen)(H2O)2]2[[Mn(salen)(H2O)][Mn(salen)]2[Mo(CN)(8)]].0.5ClO4.0.5OH.4.5H2O (2), are presented. Compound 1 crystallizes in the monoclinic system, has space group P2(1)/c, and has unit cell constants a = 13.7210(2) A, b = 20.6840(4) A, c = 20.6370(2) A, and Z = 4. Compound 2 crystallizes in the triclinic system, has space group P, and has unit cell dimensions a = 18.428(4) A, b = 18.521(3) A, c = 18.567(4) A, and Z = 2. The structure of 1 consists of the asymmetric V-shaped Mn-NC-W-NC-Mn-O(phenolate)-Mn molecules, where W(V) coordinates with [Mn(salen)H2O] and singly phenolate-bridged [Mn(salen)H2O]2 moieties through the neighboring cyano bridges. The [W(V)(CN)8]3- ion displays distorted square-antiprism geometry. The structure of 2 consists of the cyano-bridged [Mn3(III)Mo(IV)]n- repeating units linked by double phenolate bridges into one-dimensional zigzag chains. The Mn(III) centers are bound to Mo(IV) of square-antiprism geometry through the neighboring cyano bridges. The magnetic studies of 1 reveal the antiferromagnetic intramolecular interactions through the CN and phenolate bridges and the relatively weak intermolecular interactions. Compound 1 becomes antiferromagnetically ordered below TN = 4.6 K. The presence of the magnetic anisotropy is documented with the MH measurements carried out for both polycrystalline and single-crystal samples. At T = 1.9 K, the spin-flop transition is observed in the field of 18 kOe applied parallel to the bc plane, which is the easy plane of magnetization. Field dependence of magnetization of 1 shows field-induced metamagnetic behavior from the antiferromagnetic ground state of ST = 3/2 to the state of ST = 5/2. The magnetic properties of 2 indicate a weak antiferromagnetic interaction between Mn(III) centers in double-phenolate-bridged [Mn(III)(salen)]2 dinuclear subunits and a very weak ferromagnetic interaction between them through the diamagnetic [Mo(IV)(CN)8]4- spacer.     

Influence of substituents on positron annihilation in styrene copolymers

Results of angular correlation of annihilation radiation (ACAR) and positron annihilation lifetime (PAL) measurements are presented for five styrene copolymers: poly(co-styrene-phenylmaleimide) and its three derivatives with chlorine as well as for one with the OH group substituted at the benzene ring. It occurs that the chlorine substituted at three different positions at the benzene ring poly(co-styrene-o (or-m,-p)-chlorophenylmaleimide) inhibits the formation of the positronium to different extent. The greatest effect is observed in case of the chlorine atom substituted at the benzene ring at the ortho-position towards the nitrogen atom. The two long lifetimes (₃ and ₄) observed in the lifetime spectra are connected with the bimodal distributions of the free volume radius in the samples.     

Lupane-type pentacyclic triterpenes in Langmuir monolayers: a synchrotron radiation scattering study

Lupane-type pentacyclic triterpenes (lupeol, betulin, and betulinic acid) are natural products isolated from various plant sources. The terpenes exhibit a vast spectrum of biological activity and are applied in therapies for different diseases, among which the anticancer, anti-HIV, antihypercholesteremic, and antiinflammatory are the most promising. These chemicals possess amphiphilic structure and were proved to interact strongly with biomembranes, which can be the key stage in their mechanism of action. In our studies, we applied Langmuir monolayers as versatile models of biomembranes. It turned out that the three investigated terpenes are capable of stable monolayer formation; however, these monolayers differ profoundly regarding their physicochemical characteristics. In our research, we applied the Langmuir technique (surface pressure-mean molecular area (π-A) isotherm registration) coupled with Brewster angle microscopy (BAM), but the main focus was on the synchrotron radiation scattering method, grazing incidence X-ray diffraction (GIXD), which provides information on the amphiphilic molecule ordering in the angstr?m scale. It was proved that all the investigated terpenes form crystalline phases in their monolayers. In the case of lupeol, only the closely packed upright phase was observed, whereas for betulin and betulinic acid, the phase situation was more complex. Betulinic acid molecules can be organized in an upright phase, which is crystalline, and in a tilted phase, which is amorphous. The betulin film is a conglomerate of an upright crystalline monolayer phase, tilted amorphous monolayer phase, and a crystalline tilted bilayer. In our paper, we discuss the factors leading to the formation of the observed phases and the implications of our results to the therapeutic applications of the native lupane-type triterpenes.