Photothermally Induced Bistability of Emission of Yb-doped Ca4NdO(BO3)3 Single Crystals

We report on studies of changes in the emission spectra (excited at 808 nm) of the Yb-doped Ca₄NdO(BO₃)₃ single crystals due to the photothermal effects caused by the pulsed Nd:YAG laser. Increase of the sample's surface temperature after laser treatment leads to significant enhancement of the 1040 to 1060 nm emission (ascribed to the Nd^{3+ 4}F_3/2 → ⁴I_9/2, ⁴I_11/2 transitions) and simultaneous decrease of the 975 to 1050 nm emission (corresponding to the Yb^{3+ 2}F_5/2 → ²F_7/2 transition). We explain such an increase of the Nd³⁺ luminescence by thermally activated Yb³⁺ → Nd³⁺ energy transfer.     

Basal slip localization in zinc single crystals. The Considère analyses

The tensile and compression tests were performed on zinc single crystals oriented for slip in the basal slip system. During the first stage of the stress–strain curve, the localized necking was typical of strain localization in the tensile specimens. Single or multiple necks were formed along the specimen length. The range of temperatures and the strain rates for single necking of the sample was determined. The formation of such necking depends on strain hardening characteristics and can be predicted by the Considère criterion. On the other hand, propagation of the necked area along the sample length was not predictable by this criterion. Localized sliding and specimen kinking was indicative of the strain localization observed for different specimens compressed under the same conditions, i.e. temperature and strain rate. A decrease in the compression force and in the cross-sectional area with anvil displacements produced localized sliding. On the other hand, a continuous increase in the compression force was representative of tests leading to specimen kinking.     

Microstructure and mechanical properties of nano-Y2O3 dispersed ferritic steel synthesized by mechanical alloying and consolidated by pulse plasma sintering

Ferritic steel with compositions 83.0Fe–13.5Cr–2.0Al–0.5Ti (alloy A), 79.0Fe–17.5Cr–2.0Al–0.5Ti (alloy B), 75.0Fe–21.5Cr–2.0Al–0.5Ti (alloy C) and 71.0Fe–25.5Cr–2.0Al–0.5Ti (alloy D) (all in wt%) each with a 1.0?wt% nano-Y₂O₃ dispersion were synthesized by mechanical alloying and consolidated by pulse plasma sintering at 600, 800 and 1000°C using a 75-MPa uniaxial pressure applied for 5?min and a 70-kA pulse current at 3?Hz pulse frequency. X-ray diffraction, scanning and transmission electron microscopy and energy disperse spectroscopy techniques have been used to characterize the microstructural and phase evolution of all the alloys at different stages of mechano-chemical synthesis and consolidation. Mechanical properties in terms of hardness, compressive strength, yield strength and Young's modulus were determined using a micro/nano-indenter and universal testing machine. All ferritic alloys recorded very high levels of compressive strength (850–2850?MPa), yield strength (500–1556?MPa), Young's modulus (175–250?GPa) and nanoindentation hardness (9.5–15.5?GPa), with up to 1–1.5 times greater strength than other oxide dispersion-strengthened ferritic steels (<1200?MPa). These extraordinary levels of mechanical properties can be attributed to the typical microstructure of uniform dispersion of 10–20-nm Y₂Ti₂O₇ or Y₂O₃ particles in a high-alloy ferritic matrix.     

Helical twisting power of antiferroelectric chiral terphenyls in different matrices

To determine the influence of chemical structure on the Helical Twisting Power (HTP), we tested four optically active dopants having a terphenyl rigid core and the same chiral centre but differing in the length of nonchiral terminal chain and the substitution of benzene rings with fluorine atoms. The compounds were added to different achiral liquid crystalline matrices: nematic and smectic C. It was found that HTP as well as its temperature variation depends on the kind of used matrices. It gives a conclusion that information about HTP obtained in one matrix cannot be uncritically transferred to another one.     

Two-point Padé approximants for formal Stieltjes series

We prove that certain two-point Padé approximants occupying the diagonal of the Padé table form monotone sequences of lower and upper bounds uniformly converging to a Stieltjes function. The results can be applied to the theory of inhomogeneous media for the calculation of the bounds on the effective transport coefficients of heterogeneous materials.     

A Goal Programming model of the reference point method

Real-life decision problems are usually so complex they cannot be modeled with a single objective function, thus creating a need for clear and efficient techniques of handling multiple criteria to support the decision process. The most commonly used technique is Goal Programming. It is clear and appealing, but in the case of multiobjective optimization problems strongly criticized due to its noncompliance with the efficiency (Pareto-optimality) principle. On the other hand, the reference point method, although using similar control parameters as Goal Programming, always generates efficient solutions. In this paper, we show how the reference point method can be modeled within the Goal Programming methodology. It allows us to simplify implementations of the reference point method as well as shows how Goal Programming with relaxation of some traditional assumptions can be extended to a multiobjective optimization technique meeting the efficiency principle.     

Preparation and semiconducting properties of Th3As4

The resistivity, thermoelectric power and Hall constant in the temperature range of 78–830 K were determined for polycrystalline Th₃As₄ samples obtained by annealing thin thorium slabs in arsenic vapour. The samples examined were n-type semiconductors with a carrier concentration ranging from 1.0 × 10¹⁸cm^?3 to 2.8 × 10¹⁸ cm^?3 for which the effective mass was found to be equal to 0.55–0.76m₀. The Hall mobility, about 450cm²V^?1s^?1 at room temperature, obeys a $\text{T}{}^{\mathrm{<mtext>?3</mtext><mtext>2</mtext>}}$ law at high temperatures. On the basis of the electrical measurements the forbidden gap of Th₃As₄ was found to be equal to 0.43 eV.     

A note on the Percus-Yevick and hypernetted chain theories of adsorption: The second and third virial coefficients for a hard-sphere gas in contact with a wall with a soft surface layer

The first three virial coefficients of a new type in the density expansion of the adsorption isotherm for hard spheres in contact with a wall with a soft surface layer are calculated. The results are compared with those for hard spheres in contact with a hard wall.     

Renormalization group approach to lattice gauge field theories

We study four-dimensional pure gauge field theories by the renormalization group approach. The analysis is restricted to small field approximation. In this region we construct a sequence of localized effective actions by cluster expansions in one step renormalization transformations. We construct also -functions and we define a coupling constant renormalization by a recursive system of renormalization group equations.